Design a Logo for a new product line

Durum: Closed
Ödül: $100
Alınan Girdiler: 169
Kazanan: renderstudio

Winner

Yarışma Özeti

!!!!!!Read the added notes to the end that were taking from the messages!!!!!

I am developing a range of products in the form of modules.
The name i use is "MicroBlocks" with "Build with logic" as a tagline.

These module are not easy to put in a category because there will be:
electronic modules: microcontrollers, sensors, motor control etc.
mechanical modules: gearboxes, servos, pumps, linear slides, ways, etc
electrical modules: dimmers, switches, lights, etc
software: eCommerce, Forum, CMS, etc
building: ICF forms, hollow core, fasteners etc
etc...

Logo in full color that degrades well to two colors. Transparent background. Background will be light colored like white/very light grey/aluminum.
Full color will be used on digital media, 2 color on the product with pad printing.
Keep in mind the tolerances needed for pad printing. Pad printing must be possible on black product.
The format will have to be vector based as it will be used in many different sizes.

Logo will be used on website, twitter, facebook, etc.
A "logo by" with your name and URL will be included on every page footer.
If you have website building skill you will also be considered for that.

Added notes! (Taken from the messages)

Don't forget the tagline!

I think i like the whole word microblocks (caps or lowercase or mix is ok) better then only using the MB in the logo.
The letters MB have to many associations, so i want to avoid that.

Remember the requirement is that it can be printer with a pad printer in 2 colors on light and dark material.

I'll have to refine my requirements.
I don't want a very prominent "MB" as part of the logo. It can be if it is not obvious. Few famous companies are associated with MB.
Second the abstract part of the logo should be recognizable and standout. Think of the logo from as an example Motorola. The complete logo is the circle with the M inside followed by the word Motorola. It can be used together or the circle with the M can be used alone. As i will have parts that are small using only that abstract part is important. And to make it clear i do not want that part of the logo to be a very recognizable MB. I also come to the conclusion that i prefer a logo that is not that high it like it to be at least 4 times as wide as it is high.
Thank you for you submissions sofar, i am impressed with the speed and variety, although i would like to see some other colors then blue and black.

Aranan Beceriler

Winner

Benzer Yarışma İlan Et

İşveren Geribildirimi

“Was a great experience. Designed a logo according to specifications and was very quick when modifications were asked. Previews were made in all styles asked to get a good impression and the final delivered files are of very good quality. Very satisfied!”

tzadvantage, Thailand.

Genel Açıklama Panosu

Yarışma Sahibi
- 9 yıl önce
I would like to sincerely thank all people who contributed.
There were some great quality logos submitted.
Alas there can be only one winner.
Soon i will post a contest for designing a website, so stay tuned.
- 9 yıl önce
RONo0dle
- 9 yıl önce
heh! this contest was a waste of time... anyway congrats to the winner.
- 9 yıl önce
1. Yarışma Sahibi
  - 9 yıl önce
  Why?
  It has been a good contest for me because i got what i wanted. The winner also.
  With logos it is all about taste. I really liked some of your designs, but not enough to award the contest.
  I soon will make a website design contest, i hope you will consider it.
  - 9 yıl önce
airijusksevickas
- 9 yıl önce
Hello here is another version of microblocks logo. Can be done in any color or any combination. Files are .PNG [3162x3551] .AI [vector can be in any size] .JPEG .PSD .EPS .PDF. 2COLORS #212
- 9 yıl önce
DanielAlbino
- 9 yıl önce
sir please send some feedback #182 #183
- 9 yıl önce
Herry1an
- 9 yıl önce
hi CH .. please check #177 .. my fifth entry for your logo .. thanks :)
- 9 yıl önce
Yarışma Sahibi
- 9 yıl önce
I have added the messages i wrote here to the brief as many designs are made without taking it into consideration.
My requirements are forced on my by the equipment i have.
A pad printer works with ink, it is nothing more then an accurate rubber stamp.
The logo can use any color as long as it degrades very well into 2 colors that can be used on a pad printer. That means a loss of gradients and mixing of colors. I need to be able to print on a light or a dark material so the logo that is made with more color gradients need to degrade well to basic colors.
Thank you so far for the submissions. A lot of good designs and i will within 2-3 days narrow it down to only a few that fit my requirements and taste the best.
- 9 yıl önce
Yarışma Sahibi
- 9 yıl önce
Apologies to others that i rejected, this is my first on freelancer, so i am not 100% familiar with how points are distributed.
I will undo the rejects and make them 1 star.
Unfortunately for RONoOdle but i can not undo ones you redraw.
- 9 yıl önce
1. RONo0dle
  - 9 yıl önce
  It's ok... the damage was done. i lost twice the amount of XP when i withdrawn my designs... and no offense but i don think that nr #10 is what quality is about...but who am i to judge ... that was just personal opinion.
  - 9 yıl önce
2. cathy90
  - 9 yıl önce
  I wish u considered once mine too :(
  - 9 yıl önce
RONo0dle
- 9 yıl önce
Hi, i have withdrawn my entry's since you love to reject designs. What you dont know is that we lose experience points when you do that and it will make it more difficult for you to find a design that you my like since you rather reject reject them in stead of rating them with one star. i wish you all the best in finding a design that you my like. this contest ends here for me. Bye!
- 9 yıl önce
1. Yarışma Sahibi
  - 9 yıl önce
  I reject them because they are not following the requirements.
  If you send 10 that are almost the same i reject most of them and rate the best of those.
  I think quality is better then quantity and if experience points are givin for quantity then that is in my opinion wrong.
  - 9 yıl önce
davidliyung
- 9 yıl önce
Please check #129 , 130 and 131 and feedback. Thanks!
- 9 yıl önce
RONo0dle
- 9 yıl önce
Hi, please check #124 Thanks
- 9 yıl önce
Yarışma Sahibi
- 9 yıl önce
I'll have to refine my requirements.
I don't want a very prominent "MB" as part of the logo. It can be if it is not obvious. Few famous companies are associated with MB.
Second the abstract part of the logo should be recognizable and standout. Think of the logo from as an example Motorola. The complete logo is the circle with the M inside followed by the word Motorola. It can be used together or the circle with the M can be used alone. As i will have parts that are small using only that abstract part is important. And to make it clear i do not want that part of the logo to be a very recognizable MB. I also come to the conclusion that i prefer a logo that is not that high it like it to be at least 4 times as wide as it is high.
Thank you for you submissions sofar, i am impressed with the speed and variety, although i would like to see some other colors then blue and black.
- 9 yıl önce
niravashara
- 9 yıl önce
Check #118
- 9 yıl önce
airijusksevickas
- 9 yıl önce
Please check and rate. #114 Can be changeable.
- 9 yıl önce
Yarışma Sahibi
- 9 yıl önce
Remember the requirement is that it can be printer with a pad printer in 2 colors on light and dark material.
- 9 yıl önce
1. Herry1an
  - 9 yıl önce
  hi CH .. please check #88 .. and if there are any revisions needed on the design, I'd like to know .. please do not hesitate to tell me via private message so I can get to you ASAP .. thanks :)
  - 9 yıl önce
davidliyung
- 9 yıl önce
Please check #73 ,74 and 81. Thanks!
- 9 yıl önce
lucianacabane
- 9 yıl önce
feedback please!
- 9 yıl önce
ITSMERUSHME
- 9 yıl önce
Feedback for #52 please. This is just an idea for blocks with logic, if you like the concept, lot of things can be experimented. thank you !
- 9 yıl önce
Herry1an
- 9 yıl önce
hi CH .. your feedback for #47 and #48, please .. and if there are any revisions needed on the design, I'd like to know .. please do not hesitate to tell me via private message so I can get to you ASAP .. thanks :)
- 9 yıl önce
helenasdesign
- 9 yıl önce
Let me know what you think of #46 . Best Regards!
- 9 yıl önce
cathy90
- 9 yıl önce
#33 PLease feedback!
- 9 yıl önce
ferasyamani
- 9 yıl önce
hello... could please check entry # 21 & 26 , i need your feed back :)
- 9 yıl önce
Yarışma Sahibi
- 9 yıl önce
Both entries that were an exact copy have been reported.
Please use your own imagination.
- 9 yıl önce
renderstudio
- 9 yıl önce
#4 copy:http://www.grafotecnica.it/servizi/
- 9 yıl önce
1. Yarışma Sahibi
  - 9 yıl önce
  Indeed, and it is copyrighted too. So i have to dismiss those.
  The idea of using a abstract logo is however valid.
  - 9 yıl önce
renderstudio
- 9 yıl önce
#5 copy:http://www.kfar-saba.muni.il/?CategoryID=2178
- 9 yıl önce
1. Yarışma Sahibi
  - 9 yıl önce
  I don't mind if it comes from some stock material. As long as it fits the bill and does not conflict with copyright.
  - 9 yıl önce
Yarışma Sahibi
- 9 yıl önce
I think i like the whole word microblocks (caps or lowercase or mix is ok) better then only using the MB in the logo.
The letters MB have to many associations, so i want to avoid that.
- 9 yıl önce
Yarışma Sahibi
- 9 yıl önce
Don't forget the tagline!
- 9 yıl önce