Design and production of a real prototype case

  • Durum: Closed
  • Ödül: $390
  • Alınan Girdiler: 7

Yarışma Özeti

Idea of an Alu-housing…
Montag, 4. Juli 2016


The company Hi-Tec-Support GmbH manufactures the Color Brick 2.0 and distributes these.
The Color Brick 2.0 is a spectroradiometer that matches very well with the measuring devices in the medium price range. It is intended to improve the marketing of the device with a new housing design. The device should not only be high quality, but also look like this.
It should not be too light to convey a high quality impression and to improve handling during the calibration.
In addition, the name of the device (Color Brick 2.0) and the front panel should look a bit fresher.
Since the geometry and the associated arrangement of the components inside the
unit represents the real innovation and the process gives very good results, a "Housing around housing" is the preferable solution.
The device has above a window, which is placed under the lamp to be measured. Then with the PC the measurement is started.
The color and the surface can have an influence on the measurement. The "case housing" should rather be a neutral color (gray, silver) and not reflect too much.

In order to start the measurement it has to be calibrated black, the spectrometer instrument will be laid down with the opening and the calibration is carried out in the dark, which is why the device in has to have 2 stable positions, one upside down one normal like in the flyer.
With the expected quantities of 200 per year, the housing cost is shall have a maximum of 25 CHF.

Our idea was to have something like a Huawai P8 housing just larger etc…

Tavsiye Edilen Beceriler

Bu yarışmadan başlıca girdiler

Daha Fazla Katılım Görüntüle

Genel Açıklama Panosu

  • vollbrecht
    • 2 yıl önce

    Der Anhang ist leider nicht ausreichend für eine detailierte Konstruktion. Es wäre zumindest die PCB samt Anschlüssen erforderlich. Weiterhin ist mir nicht ganz klar, was geliefert werden soll. Nur ein Design, die exakte Konstruktion oder/und ein gedruckter Prototyp.

    • 2 yıl önce
  • marcellomessias
    • 2 yıl önce

    Hello Sr. Thank You for your Contest. I will wait for your post. Thank You !

    • 2 yıl önce
    1. fboth
      Yarışma Sahibi
      • 2 yıl önce

      Hi Sir, what do you expect from me?

      • 2 yıl önce

Yarışmalara nasıl başlanır

  • Projenizi ilan edin

    Yarışmanızı İlan Edin Hızlı ve kolay

  • Tonlarca girdi alın

    Tonlarca Girdi Alın Bütün dünyadan

  • En iyi girdiyi seçin

    En iyi girdiyi seçin Dosyaları indirin - Kolay!

Şimdi bir Yarışma İlan Et ya da Bugün Bize Katılın!