NASA Challenge: Develop 3D Models for Robonaut Simulation-RFID Scanner

  • Durum: Closed
  • Ödül: $75
  • Alınan Girdiler: 12
  • Kazanan: BlackRiddles

Yarışma Özeti

We (NASA) need to develop a number of high resolution 3D models to be used for Robonaut simulations. These 3D models are to be developed based on photographs of real items (see attached files). These simulated objects would be used for various grasp and manipulator testing.

This particular challenge is to build a 3D model of an RFID Scanner. A version of this item is used by astronauts on space station to both locate and keep an inventory of RFID-tagged items. This scanner can also be used by R2 to perform the same task when necessary.

Note that the bottom view image includes a white block used to hold the scanner in position for photographing. This white block should be ignored and not included in the model.

There is a scale in the attached imagery is in inches. All final model submissions must be delivered in on of the following formats: .prt (Solidworks, ProE); .step or .stp; .iges; .stl; .dae. NOTE: Freelancer submissions will need to be image file views of your model. If you win the contest, you will then send/transfer the model files to NASA via email, dropbox, etc.

All entries will be judged on the accuracy, quality, and fidelity (detail) of the model produced. Note that where highly similar top submissions are produced, the submission entered first will win.

Tavsiye Edilen Beceriler

İşveren Geribildirimi

“BlackRiddles did an great job of creating a detailed 3D model of an RFID Scanner for use in our NASA Robonaut simulation. This was a contest and his design was selected as the best.”

Profil Görüntüsü nasacoeci, United States.

Bu yarışmadan başlıca girdiler

Daha Fazla Katılım Görüntüle

Genel Açıklama Panosu

  • nasacoeci
    Yarışma Sahibi
    • 2 yıl önce

    Thank you to all of the Freelancers who participated in this challenge. You all demonstrated some amazing work. Great job BlackRiddles! Congratulations!

    • 2 yıl önce
  • nasacoeci
    Yarışma Sahibi
    • 2 yıl önce

    Thanks for all of the amazing entries for this contest. We will be working over the next few days to evaluate them all and select the winner.

    • 2 yıl önce
  • nasacoeci
    Yarışma Sahibi
    • 2 yıl önce

    Quick question for the community. Do you prefer submissions for this kind of a contest to be sealed or unsealed?

    • 2 yıl önce
    1. hammani92
      hammani92
      • 2 yıl önce

      unsealed

      • 2 yıl önce
  • tangocat
    tangocat
    • 2 yıl önce

    And NASA don't give out contest like this. Seriously $75 for a high definition 3D Model?? It seems like people are expected to do these artistic jobs almost free in the name of their contest.

    • 2 yıl önce
    1. JeramiahSawyer
      JeramiahSawyer
      • 2 yıl önce

      Regardless of it being a competition or a job, the fact that it IS a competition gives you not only the opportunity to work on it, but also gives you a better chance at having your work accepted.

      Please do not comment on the work related communication device if you are not going to say anything positive, I and many others do not tolerate, nor do we want anyone bringing the morale of the freelancer environment down.

      Be happy that you are here and doing what you love to do for a living as a freelancer, take this opportunity and expand your skill and even better your reputation.

      Thank You,

      • 2 yıl önce
  • tangocat
    tangocat
    • 2 yıl önce

    People don't get confused - this isn't NASA - check it out - http://www.nasa.gov/

    • 2 yıl önce
    1. ChristianLF
      ChristianLF
      • 2 yıl önce

      Where is the Like/Thumbs Up Feature? Funny comment.

      • 2 yıl önce
    2. JeramiahSawyer
      JeramiahSawyer
      • 2 yıl önce

      Please leave the comments for positive feedback and work related conduct.
      Thanks.

      • 2 yıl önce
  • Origin3D
    Origin3D
    • 2 yıl önce

    Due to the nature of this object it would help if there were some photos at 3/4 views as the perspective in the photos reference does hide some of the necessary detailing.

    • 2 yıl önce
    1. Origin3D
      Origin3D
      • 2 yıl önce

      Hi there, thank you so much. I have only just realised you have put them up. I have submitted what I could do without the necessary reference. Is it worth re doing the parts I now have information for, or is it too late?

      • 2 yıl önce
    2. nasacoeci
      Yarışma Sahibi
      • 2 yıl önce

      That is up to you. There is still a couple of days left on the contest.

      • 2 yıl önce
  • nasacoeci
    Yarışma Sahibi
    • 2 yıl önce

    For RFID Scanner, we just uploaded several angled photos to help better understand the object. Hope this helps.

    • 2 yıl önce
  • combinatorial
    combinatorial
    • 2 yıl önce

    Do you prefer renders in orthographic or perspective view?

    • 2 yıl önce
    1. nasacoeci
      Yarışma Sahibi
      • 2 yıl önce

      Both if possible. The more we can see of your model, the better we can evaluate it. Thanks!

      • 2 yıl önce
  • tarun3693
    tarun3693
    • 2 yıl önce

    Do you need the assembly including minor details like the screws, mini-usb port,camera, all that?

    • 2 yıl önce
    1. nasacoeci
      Yarışma Sahibi
      • 2 yıl önce

      While not a hard requirement, the winning submission will be the model that is closest to object shown in the photos. We hope that answers your question.

      • 2 yıl önce
    2. tarun3693
      tarun3693
      • 2 yıl önce

      I think the prize is quite low if we see the complexity, an increased prize money will surely be a motivation to give this our best attempt. #increaseprize

      • 2 yıl önce
  • lodhaniraj
    lodhaniraj
    • 2 yıl önce

    Do you need just the model or with textures?

    • 2 yıl önce
    1. nasacoeci
      Yarışma Sahibi
      • 2 yıl önce

      We are trying to get the 3D model that best replicates the object in the photo. Thus far in the contest, many submissions have included textures. Hope that helps.

      • 2 yıl önce
  • lodhaniraj
    lodhaniraj
    • 2 yıl önce

    I too agree with some of people here, the complexity of model does not justify the prize. #increaseprize

    • 2 yıl önce
  • amrfouad86
    amrfouad86
    • 2 yıl önce

    #increaseprize
    may I advice Nasa if they want people with high modeling skill to actually increase the prize

    • 2 yıl önce
  • binodg
    binodg
    • 2 yıl önce

    will the googlesketchup works

    • 2 yıl önce
    1. nasacoeci
      Yarışma Sahibi
      • 2 yıl önce

      As long as you can export to one of the following formats: .prt (Solidworks, ProE); .step or .stp; .iges; .stl; .dae.

      • 2 yıl önce
  • sandramohan
    sandramohan
    • 3 yıl önce

    well how about the dimensions.from the picture we able to get only outer dimension.

    • 3 yıl önce
    1. queryolive
      queryolive
      • 2 yıl önce

      Indeed, I like this type of competition,It will really help us to develop our works.I already posted for one contest,and now try for second One.

      • 2 yıl önce
    2. nasacoeci
      Yarışma Sahibi
      • 2 yıl önce

      Awesome! Thanks for your enthusiasm. We look forward to your submission.

      • 2 yıl önce
  • BeenaKR
    BeenaKR
    • 2 yıl önce

    Will you accept a .prt model of UGNX software? Or only ProE /Solidworks are considered?

    • 2 yıl önce
    1. nasacoeci
      Yarışma Sahibi
      • 2 yıl önce

      As long as you can export to one of the following formats: .prt (Solidworks, ProE); .step or .stp; .iges; .stl; .dae. The submissions will actually be images of views of your model. If you win, then you will need to provide the model in one of these formats as a final deliverable.

      • 2 yıl önce
  • aziz3d
    aziz3d
    • 2 yıl önce

    75 USD is way too low for this model, at least it should around 300 USD #increaseprize

    • 2 yıl önce
  • aziz3d
    aziz3d
    • 2 yıl önce

    you guys spent millions of $ on your projects yet very miser on these ones!!

    • 2 yıl önce
  • Pabitra04
    Pabitra04
    • 3 yıl önce

    How to participate this contest?

    • 3 yıl önce
    1. nasacoeci
      Yarışma Sahibi
      • 3 yıl önce

      Just read the brief and follow the instructions. Check out the attached images and then construct a 3D model of the RFID scanner. Then apply the appropriate textures and colors to make it as close to the actual object shown in the images. Submit various views of the model using images to upload for your submission. If you win the contest, then we will arrange to get the model files from you. Hope this helps.

      • 3 yıl önce
  • haryopriyonggo
    haryopriyonggo
    • 3 yıl önce

    i do it yeah!

    • 3 yıl önce
    1. nasacoeci
      Yarışma Sahibi
      • 3 yıl önce

      Great!

      • 3 yıl önce
  • Origin3D
    Origin3D
    • 3 yıl önce

    I must say that not having the scanner to hand makes this very difficult..but not impossible!

    • 3 yıl önce
    1. nasacoeci
      Yarışma Sahibi
      • 3 yıl önce

      Love your "can do" attitude!

      • 3 yıl önce
  • tryf
    tryf
    • 3 yıl önce

    Dear Sir/Madam,is the scale behind the RFID Scanner in mm or inches?

    • 3 yıl önce
    1. nasacoeci
      Yarışma Sahibi
      • 3 yıl önce

      Inches.

      • 3 yıl önce
  • Origin3D
    Origin3D
    • 3 yıl önce

    This looks challenging...perfect!

    • 3 yıl önce
    1. nasacoeci
      Yarışma Sahibi
      • 3 yıl önce

      :-)

      • 3 yıl önce

Daha fazla yorum göster

Yarışmalara nasıl başlanır

  • Projenizi ilan edin

    Yarışmanızı İlan Edin Hızlı ve kolay

  • Tonlarca girdi alın

    Tonlarca Girdi Alın Bütün dünyadan

  • En iyi girdiyi seçin

    En iyi girdiyi seçin Dosyaları indirin - Kolay!

Şimdi bir Yarışma İlan Et ya da Bugün Bize Katılın!