I graduated from Moscow Technical University with Master degree. I have rich and strong experience in
MECHANICAL
- 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks
- Finite Element Analysis and CFD using ANSYS and ABAQUS
- Numerical Calculation and Simulation using Matlab
- Dynamics Analysis using...daha fazla
I graduated from Moscow Technical University with Master degree. I have rich and strong experience in
MECHANICAL
- 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks
- Finite Element Analysis and CFD using ANSYS and ABAQUS
- Numerical Calculation and Simulation using Matlab
- Dynamics Analysis using Adams, Nastran, Patran
HARDWARE
- Schematic Digital, Analog, Power electronics.
- PCB layout, routing and assembly using altium designer or Eagle CAD, Allegro.
- Product design and mechanical design in Solidworks.
INDUSTRIAL
- Power supplies (AC/DC/AC) and Electric Drives (240/480VAC) using SMPS
- CVCF, DC-DC Converter, Inverter and Rectifier.
- Bio-metric device such as Fingerprint identification system
- Glucose Monitoring device development.
- IPS system using UWB banddaha az
***********************QUALITY - ON TIME ************************
We are a design team with 3 groups: System Design, Layout PCB & Mechanical.
We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, Software and +7 years experience of 3D Design (3D printing, CNC and Mould).
Our key...daha fazla
***********************QUALITY - ON TIME ************************
We are a design team with 3 groups: System Design, Layout PCB & Mechanical.
We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, Software and +7 years experience of 3D Design (3D printing, CNC and Mould).
Our key skills are IoT, Embedded, Digital & Analog, High-speed, Memory, WIFI, GPRS, GPS, RF, BLE... We have designed up to +24 layers PCB.
Experience designing high density boards include FPGA, EMCC, DDR, PCIE, SATA, ETH, BLE, WIFI, HDMI, USB, QSFP, LVDS...etc.
Also, we provide programming for MCU, FAB, ASSEMBLY & TESTING services.
We can make any prototypes, even support mass production.
We use the expertise of the following software:
- Allegro/Orcad
- Altium.
- Eagle
- Mentor Pads.
- Expedition
- Solidworks/ Autocad.
- C/C++
- Android, IOS...
We provide Service & Support even after completion of the projects.
"We are ready to give you the best"
**********Best regards*******daha az
⭐ ⭐ ⭐ ⭐ ⭐
As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years.
Here are some of the experiences that I worked ago.
- Exceptional C++/C /C# programming skills.
- Strong foundation in simulation MATLAB
- FPGA design using Verilog/VHDL (Xilinx...daha fazla
⭐ ⭐ ⭐ ⭐ ⭐
As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years.
Here are some of the experiences that I worked ago.
- Exceptional C++/C /C# programming skills.
- Strong foundation in simulation MATLAB
- FPGA design using Verilog/VHDL (Xilinx ISE/XPS/SDK/Vivado, Altera Quartus, iCECube)
- ARM, DSP, MCUs, Arduino experience.
- Arm cores: ATSAM, STM32, PIC32, A13, FreeScale, MSP, NXP
- MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251
- Single board computer: Raspbery pi, Beaglebone, NanoPi
- Strong with UART, I2C, SPI, BLE,BT, GSM/GPRS/GPS, xBee, ZigBee.
- Especially full experience for BLE
And here are some of tools that I normally use, but not limited to:
- Altium Designer, Cadsoft Eagle, Cadence Allegro, OrCAD, Ansoft, ADS, HFSS, MATLAB, Quartus II, CCS, Micro C, etc.
Once you hire me, expected me to help your business like I 'm growing it as my own.
I would love to hear from you.daha az
I am an electronic expert, having full experience in schematic and pcb layout design. I have developed several products for customers for 9 years in industry company. My slogan is “complete Client's job on time with high quality.” I tried to support my clients with open-mind all the time.
My skills are below:
-...daha fazla
I am an electronic expert, having full experience in schematic and pcb layout design. I have developed several products for customers for 9 years in industry company. My slogan is “complete Client's job on time with high quality.” I tried to support my clients with open-mind all the time.
My skills are below:
- Routing PCB with double-sided, 4-layers, 6-layers,8-layers and more layers pcb stackup,
- Zigbee, X bee,
- WIFI, BLE
- MCUs: Microchip series(PIC), TI DSP, ARM, ATMEGA, Arduino, Raspberry
- Analog & Digital circuit & PCB design
My main technical software are following:
- Altium designer, Allegro, OrCad, Autocad, Eagle.
- CAD 3D, Solidwork
I will sufficient and reliable products for clients. I am always struggling to fulfil the clients’ requirements with open-mind.daha az
We are Expert TEAM with exceptional skills and professional attitude.
At our Company, we do professional circuit designing, PCB designing, embedded systems development and Software Development.
We analyze and produce complete Product Design and ensure reliability.
Our area of expertise include.
1. Electrical...daha fazla
We are Expert TEAM with exceptional skills and professional attitude.
At our Company, we do professional circuit designing, PCB designing, embedded systems development and Software Development.
We analyze and produce complete Product Design and ensure reliability.
Our area of expertise include.
1. Electrical & Electronics Engineering
2. Software Development
3. Product Design and Prototyping
4. Networks.
5. Programming in C, C++, Python.
6. Graphical Designing and Graphical Interfacing of Software.
7. Android Application Development.
8 Hardware and Software Integration.
9. Internet of Things Products. Node.js, JSON etc
10. Troubleshooting.
We provide constant and full support to our clients for all kind of projects.
In short, we are a place where hardware meets software.
Regards,
Ahmed
Note: Some negative reviews are because some clients first pretend to develop one thing later end up pushing us to develop quite different thing.daha az
I carefully choose projects I know I have the time, expertise and interest in completing. When I make a bid, I have already scheduled the work I could do for you. I currently work for consulting firm as FTV.
I am an Electronics and communication engineer specializing in embedded system design and fabrication. I am...daha fazla
I carefully choose projects I know I have the time, expertise and interest in completing. When I make a bid, I have already scheduled the work I could do for you. I currently work for consulting firm as FTV.
I am an Electronics and communication engineer specializing in embedded system design and fabrication. I am mainly proficient with Arduino, ESP8266, LED circuit designing and PCB layout designing. This allows me to take your requirements and ideas, and effectively and efficiently convert them in to a functioning product by delivering you design files, code, prototype PCBs and a detailed BOM as requested.
I enjoy using my creative expertise and knowledge to provide my friends and clients with best possible solutions. I am passionate about complex challenges, and this is what keeps me ready all the time for any job big or small Thank you and awaiting to serve(and impress) you!
(Arduino, Chatbot, Azure, COBOL, RPA, Blue Prism, UiPath, IoT, IIoT, Solution Architect)daha az
"Give to me , get perfect result"
- 5 year experiences work with Altium Designer to design the communication equipments
- 5 year experiences in designing the digital and analog circuit ,etc MCU, Tx/Rx circuit, PA,...
- Experiences in manufacturing at the factorydaha fazla
"Give to me , get perfect result"
- 5 year experiences work with Altium Designer to design the communication equipments
- 5 year experiences in designing the digital and analog circuit ,etc MCU, Tx/Rx circuit, PA,...
- Experiences in manufacturing at the factorydaha az
I'm an Electronic Engineer with more than 10 years experience in embedded system and electronic design, PCB layout design, routing, assembly, and control system fields. I'm designed a lot of prototypes with Microchip and Atmel microcontrollers and also with a Digital, Analog or Power Electronics Circuits and developed...daha fazla
I'm an Electronic Engineer with more than 10 years experience in embedded system and electronic design, PCB layout design, routing, assembly, and control system fields. I'm designed a lot of prototypes with Microchip and Atmel microcontrollers and also with a Digital, Analog or Power Electronics Circuits and developed many projects for Arduino in any kind of area like escape rooms or escape chambers, IOT, robotics and more
I've worked with hardware, software, and firmware from multiple platforms:
Skills
--Microcontrollers
-PIC (12F, 16F, 18F, 24F), ATtiny, ATmega328, Microchip, Atmel, ST
--MCU FIRMWARE
-Mplab XC8, CCS, LUA
--HARDWARE CAD
-Eagle, Altium, KiCad, AutoCAD
--APP SOFTWARE
-LabVIEW, Matlab, Visual Studio, Python, Java, C#, C++, Https and Embedded Web servers, PHP, MySQL, Linux
--HW PLATFORM
-Xbee, Raspberry PI, NodeMCU, ESP8266, BeagleBone ,ESP32 Wroom, Nextion, LCD, Arduino, Particle, Pycom
--COMMUNICATIONS
-I2C, SPI, CAM, UART, RS232, RS485, LIN, USB, BLE, MQTT, RFIDdaha az
Selam , işte bazı çevrimdışı freelancerlar
Selam , işte "" anahtar kelimeleriyle eşleşen bazı çevrimdışı freelancerlar
Sponsorlu:
Bu beceri için 7 gün boyunca sayfanın tepesinde görünün! Sizlerden sadece 10 kişi kendisine sponsorluk yapabilir ve bir kerede 3 adeti gösterilir.
Öne çıkarın:
Bir öne çıkarma ile profilinizin bu beceri için dikkat çekmesini ve İşverenler tarafından farkedilmesini sağlayın!
(fiyatlara Mal ve Hizmetler Vergisi dahil değildir)
I graduated from Moscow Technical University with Master degree. I have rich and strong experience in MECHANICAL - 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks - Finite Element Analysis and CFD using ANSYS and ABAQUS - Numerical Calculation and Simulation using Matlab - Dynamics Analysis using...I graduated from Moscow Technical University with Master degree. I have rich and strong experience in MECHANICAL - 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks - Finite Element Analysis and CFD using ANSYS and ABAQUS - Numerical Calculation and Simulation using Matlab - Dynamics Analysis using Adams, Nastran, Patran HARDWARE - Schematic Digital, Analog, Power electronics. - PCB layout, routing and assembly using altium designer or Eagle CAD, Allegro. - Product design and mechanical design in Solidworks. INDUSTRIAL - Power supplies (AC/DC/AC) and Electric Drives (240/480VAC) using SMPS - CVCF, DC-DC Converter, Inverter and Rectifier. - Bio-metric device such as Fingerprint identification system - Glucose Monitoring device development. - IPS system using UWB band daha az
***********************QUALITY - ON TIME ************************ We are a design team with 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, Software and +7 years experience of 3D Design (3D printing, CNC and Mould). Our key...***********************QUALITY - ON TIME ************************ We are a design team with 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, Software and +7 years experience of 3D Design (3D printing, CNC and Mould). Our key skills are IoT, Embedded, Digital & Analog, High-speed, Memory, WIFI, GPRS, GPS, RF, BLE... We have designed up to +24 layers PCB. Experience designing high density boards include FPGA, EMCC, DDR, PCIE, SATA, ETH, BLE, WIFI, HDMI, USB, QSFP, LVDS...etc. Also, we provide programming for MCU, FAB, ASSEMBLY & TESTING services. We can make any prototypes, even support mass production. We use the expertise of the following software: - Allegro/Orcad - Altium. - Eagle - Mentor Pads. - Expedition - Solidworks/ Autocad. - C/C++ - Android, IOS... We provide Service & Support even after completion of the projects. "We are ready to give you the best" **********Best regards******* daha az
⭐ ⭐ ⭐ ⭐ ⭐ As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years. Here are some of the experiences that I worked ago. - Exceptional C++/C /C# programming skills. - Strong foundation in simulation MATLAB - FPGA design using Verilog/VHDL (Xilinx...⭐ ⭐ ⭐ ⭐ ⭐ As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years. Here are some of the experiences that I worked ago. - Exceptional C++/C /C# programming skills. - Strong foundation in simulation MATLAB - FPGA design using Verilog/VHDL (Xilinx ISE/XPS/SDK/Vivado, Altera Quartus, iCECube) - ARM, DSP, MCUs, Arduino experience. - Arm cores: ATSAM, STM32, PIC32, A13, FreeScale, MSP, NXP - MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251 - Single board computer: Raspbery pi, Beaglebone, NanoPi - Strong with UART, I2C, SPI, BLE,BT, GSM/GPRS/GPS, xBee, ZigBee. - Especially full experience for BLE And here are some of tools that I normally use, but not limited to: - Altium Designer, Cadsoft Eagle, Cadence Allegro, OrCAD, Ansoft, ADS, HFSS, MATLAB, Quartus II, CCS, Micro C, etc. Once you hire me, expected me to help your business like I 'm growing it as my own. I would love to hear from you. daha az
I am an electronic expert, having full experience in schematic and pcb layout design. I have developed several products for customers for 9 years in industry company. My slogan is “complete Client's job on time with high quality.” I tried to support my clients with open-mind all the time. My skills are below: -...I am an electronic expert, having full experience in schematic and pcb layout design. I have developed several products for customers for 9 years in industry company. My slogan is “complete Client's job on time with high quality.” I tried to support my clients with open-mind all the time. My skills are below: - Routing PCB with double-sided, 4-layers, 6-layers,8-layers and more layers pcb stackup, - Zigbee, X bee, - WIFI, BLE - MCUs: Microchip series(PIC), TI DSP, ARM, ATMEGA, Arduino, Raspberry - Analog & Digital circuit & PCB design My main technical software are following: - Altium designer, Allegro, OrCad, Autocad, Eagle. - CAD 3D, Solidwork I will sufficient and reliable products for clients. I am always struggling to fulfil the clients’ requirements with open-mind. daha az
I have 2 years experience in creating embedded and IoT applications. 1. Development Boards - Arduino, NodeMCU, Particle Photon, BBC microbit, MSP430 launchpad 2. Microcontrollers - 8051, PIC, AVR & MSP430 3. Communication - UART, SPI, 2 wire I2C & 1 wire 4. Hardware - Circuit design, power electronics 4....I have 2 years experience in creating embedded and IoT applications. 1. Development Boards - Arduino, NodeMCU, Particle Photon, BBC microbit, MSP430 launchpad 2. Microcontrollers - 8051, PIC, AVR & MSP430 3. Communication - UART, SPI, 2 wire I2C & 1 wire 4. Hardware - Circuit design, power electronics 4. Wireless - GSM SIM800, GPS NMEA, RFid, NRF24l01, Bluetooth & RF434mhz, BLE, beacons. 5. Sensors - DHT11/22, DHT18B20, Accelerometer ADXL335, Distance Ultrasonic HCSR04, PIR motion sensor, Hear rate Pulse sensor, MAX30102 pulse oximeter sensor, Soil moisture, Anemometer. 6. Internet of Things - ESP8266 WiFi, LAN, GPRS, MQTT, HTTP & NodeRed, RestFul API's, ESP32 7. API'S USED: Adafruit, Blynk, CloudMQTT, Azure, ubidots 8. Display: Neopixels ws2812, oled, nextion hmi 9. Mobile Application platform: Blynk 10. Single board linux platforms: Raspberry Pi 3. 11. Languages: embedded c,c++, Python. daha az
We are Expert TEAM with exceptional skills and professional attitude. At our Company, we do professional circuit designing, PCB designing, embedded systems development and Software Development. We analyze and produce complete Product Design and ensure reliability. Our area of expertise include. 1. Electrical...We are Expert TEAM with exceptional skills and professional attitude. At our Company, we do professional circuit designing, PCB designing, embedded systems development and Software Development. We analyze and produce complete Product Design and ensure reliability. Our area of expertise include. 1. Electrical & Electronics Engineering 2. Software Development 3. Product Design and Prototyping 4. Networks. 5. Programming in C, C++, Python. 6. Graphical Designing and Graphical Interfacing of Software. 7. Android Application Development. 8 Hardware and Software Integration. 9. Internet of Things Products. Node.js, JSON etc 10. Troubleshooting. We provide constant and full support to our clients for all kind of projects. In short, we are a place where hardware meets software. Regards, Ahmed Note: Some negative reviews are because some clients first pretend to develop one thing later end up pushing us to develop quite different thing. daha az
I have 5 years experience in creating embedded and IoT projects. 1. Development Boards - Arduino, NodeMCU, Particle Photon, BBC microbit, MSP430 launchpad 2. Microcontrollers - 8051, PIC, AVR & MSP430 3. Communication - UART, SPI, 2 wire I2C & 1 wire 4. Hardware - Circuit design, power electronics 4. Wireless -...I have 5 years experience in creating embedded and IoT projects. 1. Development Boards - Arduino, NodeMCU, Particle Photon, BBC microbit, MSP430 launchpad 2. Microcontrollers - 8051, PIC, AVR & MSP430 3. Communication - UART, SPI, 2 wire I2C & 1 wire 4. Hardware - Circuit design, power electronics 4. Wireless - GSM SIM800, GPS NMEA, RFid, NRF24l01, Bluetooth & RF434mhz, BLE, beacons. 5. Sensors - DHT11/22, DHT18B20, Accelerometer ADXL335, Distance Ultrasonic HCSR04, PIR motion sensor, Hear rate Pulse sensor, MAX30102 pulse oximeter sensor, Soil moisture, Anemometer. 6. Internet of Things - ESP8266 WiFi, LAN, GPRS, MQTT, HTTP & NodeRed, RestFul API's, ESP32 7. API'S USED: Adafruit, Blynk, CloudMQTT, Azure, ubidots 8. Display: Neopixels ws2812, oled, nextion hmi 9. Mobile Application platform: Blynk 10. Single board linux platforms: Raspberry Pi 3. 11. Languages: embedded c,c++, Python. daha az
I carefully choose projects I know I have the time, expertise and interest in completing. When I make a bid, I have already scheduled the work I could do for you. I currently work for consulting firm as FTV. I am an Electronics and communication engineer specializing in embedded system design and fabrication. I am...I carefully choose projects I know I have the time, expertise and interest in completing. When I make a bid, I have already scheduled the work I could do for you. I currently work for consulting firm as FTV. I am an Electronics and communication engineer specializing in embedded system design and fabrication. I am mainly proficient with Arduino, ESP8266, LED circuit designing and PCB layout designing. This allows me to take your requirements and ideas, and effectively and efficiently convert them in to a functioning product by delivering you design files, code, prototype PCBs and a detailed BOM as requested. I enjoy using my creative expertise and knowledge to provide my friends and clients with best possible solutions. I am passionate about complex challenges, and this is what keeps me ready all the time for any job big or small Thank you and awaiting to serve(and impress) you! (Arduino, Chatbot, Azure, COBOL, RPA, Blue Prism, UiPath, IoT, IIoT, Solution Architect) daha az
"Give to me , get perfect result" - 5 year experiences work with Altium Designer to design the communication equipments - 5 year experiences in designing the digital and analog circuit ,etc MCU, Tx/Rx circuit, PA,... - Experiences in manufacturing at the factory"Give to me , get perfect result" - 5 year experiences work with Altium Designer to design the communication equipments - 5 year experiences in designing the digital and analog circuit ,etc MCU, Tx/Rx circuit, PA,... - Experiences in manufacturing at the factory daha az
I'm an Electronic Engineer with more than 10 years experience in embedded system and electronic design, PCB layout design, routing, assembly, and control system fields. I'm designed a lot of prototypes with Microchip and Atmel microcontrollers and also with a Digital, Analog or Power Electronics Circuits and developed...I'm an Electronic Engineer with more than 10 years experience in embedded system and electronic design, PCB layout design, routing, assembly, and control system fields. I'm designed a lot of prototypes with Microchip and Atmel microcontrollers and also with a Digital, Analog or Power Electronics Circuits and developed many projects for Arduino in any kind of area like escape rooms or escape chambers, IOT, robotics and more I've worked with hardware, software, and firmware from multiple platforms: Skills --Microcontrollers -PIC (12F, 16F, 18F, 24F), ATtiny, ATmega328, Microchip, Atmel, ST --MCU FIRMWARE -Mplab XC8, CCS, LUA --HARDWARE CAD -Eagle, Altium, KiCad, AutoCAD --APP SOFTWARE -LabVIEW, Matlab, Visual Studio, Python, Java, C#, C++, Https and Embedded Web servers, PHP, MySQL, Linux --HW PLATFORM -Xbee, Raspberry PI, NodeMCU, ESP8266, BeagleBone ,ESP32 Wroom, Nextion, LCD, Arduino, Particle, Pycom --COMMUNICATIONS -I2C, SPI, CAM, UART, RS232, RS485, LIN, USB, BLE, MQTT, RFID daha az
