İşe Alınmak Üzere Radio Frequency Engineers

  • Radio Frequency
Öneriler:
daha fazla

Ülkeler

Belirli Konum

Sınavlar

Saatlik Ücret (USD)

Derecelendirme

Çevrimiçi

11 sonuç gösteriliyor
  •     Devpro11
 adlı kullanıcıyı işe alın     Devpro11
 adlı kullanıcıyı işe alın

    Devpro11 Devpro11

    Morocco 30$ USD / saat
    Senior PCB & Firmware Developer
    Morocco
    Hello, Dear Clients! You will see the reality of the near future by us. I will share ideas and inspiration for your project and provide you with the best technical service to make it the reality you desire. Our team consists of senior freelancers(engineers/developers/designers) with more than 10+ years of development...
    Hello, Dear Clients! You will see the reality of the near future by us. I will share ideas and inspiration for your project and provide you with the best technical service to make it the reality you desire. Our team consists of senior freelancers(engineers/developers/designers) with more than 10+ years of development experience in various fields. Our skill services are as follows: ------------------- Engineering(Hardware) skills are-------------------- ✅ Mechanical/Structural engineering(CAD/CAM, Solidworks, AutoCad) ✅ 3D Modeling & 3D Designs & 3D Rendering. ✅ Schematic/PCB layout and Design & Simulation(can design 8-layers PCB) ✅ Reverse engineering ✅ Embedded Firmware Programming, Industrial Automation - STM32, Arduino, Raspberry Pi, Jetson. - PIC, Atmega, MSP430, etc. - nRF series, ESP32 series, etc. - PLC & SCADA, Eplan development. ✅ Design and simulation of Radio Frequency/Microwave/mm-wave systems and subsystems (by using Keysight ADS, CST, HFSS, FEKO, GENESYS...) RECTENNA, ANTENNA, Filter, Synthesis, etc. ✅ IoT, xbee/zigbee, BLE, LoRa/LoRaWAN/Sigfox/LTE, GPS/GNSS, UWB ✅ Thermal/EMC/EMI simulation and analysis ✅ AI/ML, Deep Learning, Open CV We always work honestly and satisfy clients. Feel free to contact me with any questions. Thanks! Ait. daha az
  • Devpro11 adlı kullanıcıyı işe alın
  •     macroenergy
 adlı kullanıcıyı işe alın     macroenergy
 adlı kullanıcıyı işe alın

    macroenergy macroenergy

    Turkey 25$ USD / saat
    Electronics Engineer
    Turkey
    DearSir, My background is related with: -Digital Motor Control -Analog Design -Electronic Design -PowerElectronics -Renewable energy -PCB design -Embedded system -Matlab -Simulation of hardware For each concept descriptions are as follows: Digital Motor Control: -3-phase induction motor vector control drive -Flux...
    DearSir, My background is related with: -Digital Motor Control -Analog Design -Electronic Design -PowerElectronics -Renewable energy -PCB design -Embedded system -Matlab -Simulation of hardware For each concept descriptions are as follows: Digital Motor Control: -3-phase induction motor vector control drive -Flux estimation algoritm generation -DSP(TMS320) implementation on motor drive -Low speed application -Torque and speed loop generation -Control algoritms -BLDC motor -Step motor -DC motor Analog design -Low power distribution -Noissless special opamp based analog circuits -Analog filters -Orcad simulation of several circuits Electronic Design -RF transmitter and receiver -Bluetooh reade rand transmitter -Magneticreader PowerElectronics -Implementation motor drive -AC/DC converter -DC-DC converter -Battery charger -Solar inverter -Renewable Energy -Uninterruptle power supplies PCB design -Schematic design by Altium -PCB design by Altium -Power board design -SMPS board design -Easyeda -CAD files of manufacturers Embedded system -ESP32,ESP8266,modules -Bluetooth and Wifi -PIC18,PIC24,PIC30 and dsPIC applications -Ardino -MSP430 -Atmel -DSP(Texas Instruments) -Renesas -STM32 -C2000 Matlab -Power Electronics simulation -Motor drive -WindEnergy -Solar Energy -Control applications Simulation of Hardware -Orcad Simulation (TI,National, LinearTech, Maximlibraries) -LTI -National -Matlab -Easyeda daha az
  • macroenergy adlı kullanıcıyı işe alın
  •     kostyausha
 adlı kullanıcıyı işe alın     kostyausha
 adlı kullanıcıyı işe alın

    kostyausha kostyausha

    Ukraine 35$ USD / saat
    Hardware Engineer | PCB Designer
    Ukraine
    I’m Professional Electrical Designer Engineer having 5+ years of experience. To provide top notch solution for Commercial and Residential Layouts. I provide services in following areas: ✔ PCB & Multilayer Design (Altium Designer, KiCad, Eagle, PADS) ✔ AutoCAD/REVIT Design. ✔ Smart IoT Solution Design ✔ Electrical...
    I’m Professional Electrical Designer Engineer having 5+ years of experience. To provide top notch solution for Commercial and Residential Layouts. I provide services in following areas: ✔ PCB & Multilayer Design (Altium Designer, KiCad, Eagle, PADS) ✔ AutoCAD/REVIT Design. ✔ Smart IoT Solution Design ✔ Electrical circuit Design ✔ Embedded System Design ✔ Power Distribution Design ✔ Electrical Engineering ✔ Atmel, Arduino, PIC 16F, PIC 18F, STM32Fxx, ESP32, ESP8266 ✔ Raspberry PI ✔ Bluetooth, GSM, WIFI, IR Remote, Transformer Design ✔ Prototype Design, Assembling, SMD Technology I will always waiting for your idea, Thank you. daha az
  • kostyausha adlı kullanıcıyı işe alın
  •     vadimdamka
 adlı kullanıcıyı işe alın     vadimdamka
 adlı kullanıcıyı işe alın

    vadimdamka vadimdamka

    Belarus 30$ USD / saat
    Mechanical/Product/Industrial/3D CAD/Logo designer
    Belarus
    Hello! My name is Vadim. I am a professional 3D/CAD modeler and product & industrial & mechanical designer. I have 15 more years of experience working in CAD drafting and 3D modelling. The services I offer include: ?SOLIDWORKS/AUTOCAD/KEYSHOT/3DS MAX/PHOTOSHOP? ⭐Design complicated parts, assemblies...
    Hello! My name is Vadim. I am a professional 3D/CAD modeler and product & industrial & mechanical designer. I have 15 more years of experience working in CAD drafting and 3D modelling. The services I offer include: ?SOLIDWORKS/AUTOCAD/KEYSHOT/3DS MAX/PHOTOSHOP? ⭐Design complicated parts, assemblies system(whatever you want) & 3D model based on your sketches, drawings, pictures or just fantastic ideas. ⭐ Creating set of manufacturing drawings based on 3D models/assemblies. ⭐ Transform 2D drawing to 3D model. ⭐ Creating flat panel for sheet metal. ⭐ Converting STL files to solid models (STEP, IGS, X_T) for mold. ⭐ Creating STL, IGES and STEP files for 3D printing. ⭐ Creating DXF files for CNC/Laser/Plasma cutting. ⭐ 2D CAD drafting in AutoCAD (architectural and technical drawings, converting from pdf/images to AutoCAD). I can provide to you all what you need from a concept to perfect manufacturing drawings and rendering & logo for business. I accept offers that I'm certainly able to finish, so once you hire me - you won't just waste your time. Don't be afraid to contact me in chat - I'll answer all your questions. Kindly check my portfolio and feedback below. Best regards. daha az
  • vadimdamka adlı kullanıcıyı işe alın
  •     Lilywang70
 adlı kullanıcıyı işe alın     Lilywang70
 adlı kullanıcıyı işe alın

    Lilywang70 Lilywang70

    China 38$ USD / saat
    Hardware & Firmware developer
    China
    I am a full-stack developer and have much experience for working on Smart IOT device, Embedded and Control System Design and so on. - My Experiences: *PCB Design & Layout - Eagle Cad, KiCard, Altium, PADS, 2-6 Layer PCB *Electronics Design, Circuit Design, Schematic Design *Power Electronics *Wireless Technology...
    I am a full-stack developer and have much experience for working on Smart IOT device, Embedded and Control System Design and so on. - My Experiences: *PCB Design & Layout - Eagle Cad, KiCard, Altium, PADS, 2-6 Layer PCB *Electronics Design, Circuit Design, Schematic Design *Power Electronics *Wireless Technology *IoT *Micro Controller Hardware & Software *Embedded Systems Design and Solution *Atmel, Arduino, PIC 16F, PIC 18F, STM32Fxx *ESP32, ESP8266 *Raspberry PI *Bluetooth, GSM, WIFI, IR Remote, Transformer Design *Dot Matrix, RGB, LED Dimmer, Temperature & Humidity *Motor (DC, Servo, Stepper, BLDC ) Driver *Solar Battery Storage, ZigBee Communication, RF Technology, DC to DC Converter *Power Supply Design *OLED display, PWM, LCD Display *Prototype Design, Assembling, SMD Technology . CAD Drawing - AudoCAD, Solidworks, Inventor daha az
  • Lilywang70 adlı kullanıcıyı işe alın
  •     lavervalik
 adlı kullanıcıyı işe alın     lavervalik
 adlı kullanıcıyı işe alın

    lavervalik lavervalik

    Ukraine 35$ USD / saat
    PCB Designer | Hardware Engineer
    Ukraine
    Hello, Everyone I am an Electrical/Electronics Engineer. I am expert in hardware and software developement field. My skills are - Professional PCB design(ALTIUM Designer, KICAD, EAGLE) - Arduino/ Microcontroller(Arduino IDE, Platform IO, MPLAB, MIKROCHIP, ETC) - TFT and Touch screen designs (Nextion, Visual designer,...
    Hello, Everyone I am an Electrical/Electronics Engineer. I am expert in hardware and software developement field. My skills are - Professional PCB design(ALTIUM Designer, KICAD, EAGLE) - Arduino/ Microcontroller(Arduino IDE, Platform IO, MPLAB, MIKROCHIP, ETC) - TFT and Touch screen designs (Nextion, Visual designer, Nuritake, layout designer) - IOT Technologies (BLE, Wi-Fi, RF, GSM, GPS, ESP32/ESP8266, STM32, MQTT, BLYNK, CODE BLOCKS) - CIRCUIT SIMULATION (Pspice/LTspice/Proteus/Multisim) - FPGA(Xilinx, altera) - 3D Designs (AutoCAD/ Solid works/FUSION 360) I am very experienced and I am sure you will be satisfied with my work. I will do my best for you. Thank you daha az
  • lavervalik adlı kullanıcıyı işe alın
  •     umg536
 adlı kullanıcıyı işe alın     umg536
 adlı kullanıcıyı işe alın

    umg536 umg536

    Pakistan 50$ USD / saat
    ENGINEER | DEVELOPER | DATA SCIENTIST
    Pakistan
    A team of professional ENGINEERS and DEVELOPERS who work effortlessly to get 5 STARS in every project.. **Computer Science(Machine Learning,Deep Learning,Artificial Intelligence,Algorithms, Linux, Bash, Docker, Asterisk ) **Engineering(Electrical,Mechanical,Civil,Chemical,Software,Petroleum,Structural)...
    A team of professional ENGINEERS and DEVELOPERS who work effortlessly to get 5 STARS in every project.. **Computer Science(Machine Learning,Deep Learning,Artificial Intelligence,Algorithms, Linux, Bash, Docker, Asterisk ) **Engineering(Electrical,Mechanical,Civil,Chemical,Software,Petroleum,Structural) **Statistics/Data Analysis (SPSS/Minitab/Weka/R Programming) **Big Data Analysis(Classification and Prediction,Hadoop,Spark ) **Game/Web development(3D,AR,VR,Unity 3D,IOS/Android Apps) **Software Development** **Matlab and Mathematica Python, Java, C/C++,C#, Arduino,Raspberry pi, Cloud Computing,3ds Max, Autocad,Solidworks,Revit Cisco,Simulink, Verilog/VHDL, Ansys, CAD,CAM,Abaqus, Arena,PCB, Hardware, EAGLE, Linux,Unix, Socket,Aspen,Hysys, TensorFlow,Keras,OpenCv,OpenGl,PLC daha az
  • umg536 adlı kullanıcıyı işe alın
  •     MichaelWestwood
 adlı kullanıcıyı işe alın     MichaelWestwood
 adlı kullanıcıyı işe alın

    MichaelWestwood MichaelWestwood

    South Africa 35$ USD / saat
    Electronics, Software and Machine Vision Engineer
    South Africa
    I have a BSc in electrical engineering, am a certified Labview developer and have 20 years experience developing custom systems for industrial environments, mainly focused on visual and thermal imaging but also including motion control. I have also developed hardware and software for industrial embedded systems...
    I have a BSc in electrical engineering, am a certified Labview developer and have 20 years experience developing custom systems for industrial environments, mainly focused on visual and thermal imaging but also including motion control. I have also developed hardware and software for industrial embedded systems based on ATMEGA, Atmel ARM, PIC, Arduino and Paticle IoT platforms. My design philosophy is firmly based on Murphy's Law, to create systems that anticipate possible conditions and anomalies and are flexible enough to handle these and possible future requirements. If something can go wrong it will. My experience includes - Design and implementation of visual and thermal based imaging applications - Machine vision system design (optics, lighting, hardware and software) - Extensive development using LabVIEW, LabVIEW Realtime, IMAQ Vision and National Instruments hardware. NI Certified LabVIEW Developer - Electronic circuit design (incl. PCB layout) of embedded systems using Atmel, PIC, Arduino. - C coding for microcontrollers, Arduino and pre-Arduino - Congex vision systems (spreadsheet and easybuilder) - Particle Photon IoT daha az
  • MichaelWestwood adlı kullanıcıyı işe alın
  •     jitendracf
 adlı kullanıcıyı işe alın     jitendracf
 adlı kullanıcıyı işe alın

    jitendracf jitendracf

    India 30$ USD / saat
    PCB Designer | Firmware Developer | IoT Expert
    India
    I have more than 10 years of experience working with analog and digital circuit design. I am proficient in PCB designing & prototyping, embedded systems, microcontroller design and programming. Embedded Systems Expertise: - PCB design upto Six Layers - Altium Designer, Cadsoft Eagle, Kicad - Requirement analysis and...
    I have more than 10 years of experience working with analog and digital circuit design. I am proficient in PCB designing & prototyping, embedded systems, microcontroller design and programming. Embedded Systems Expertise: - PCB design upto Six Layers - Altium Designer, Cadsoft Eagle, Kicad - Requirement analysis and research - Firmware development on micro-controllers/microprocessors - Micro-controllers/processors - Wireless drivers and applications for WiFi, RF, BLE, GSM/GPS, LTE, NB-IOT, RFID, NFC, Lora - Hands on experience on I2C, SPI, UART, RS485, CAN, TCP/IP, SDI-12 - IOT product development - Hands on experience using Raspberry Pi zero/2/3/4 - Sensors integration - Vehicle Health System using OBD-II - Embedded C, C++, Python and Shell Scripting - Windows, Linux, TI-RTOS, TI-SIMPLELINK, Free RTOS, Zephyr - Microvision Keil, Code Composer Studio, IAR Workbench for 8051 and ARM, Avr Studio, MPLABx IDE, nRF Studio, Arduino IDE, Segger Studio, Simplicity studio - Hands on experience in Arduino development Just give me your idea and I will transform it into a functioning product with fully tested and manufacturing ready package. daha az
  • jitendracf adlı kullanıcıyı işe alın
  •     mfcaglar
 adlı kullanıcıyı işe alın     mfcaglar
 adlı kullanıcıyı işe alın

    mfcaglar mfcaglar

    Turkey 20$ USD / saat
    PhD @ Electronics and Communication Engineering
    Turkey
    I am an ex assist. Prof in Turkey. I worked 20 years as a lecturer given courses about analog and digital communications, analog and digital electronic circuits, electromagnetic waves, antennas, RF/microwave circuits, C/C++ and MATLAB, neural networks, artificial intelligence, etc. I am an entrepreneur and have a...
    I am an ex assist. Prof in Turkey. I worked 20 years as a lecturer given courses about analog and digital communications, analog and digital electronic circuits, electromagnetic waves, antennas, RF/microwave circuits, C/C++ and MATLAB, neural networks, artificial intelligence, etc. I am an entrepreneur and have a firm about agricultural electronics, and machinery. I am interested in software and hardware. I have more than 55 papers and 190 citations. I had supervise experience on PhD and MSc of ECE. daha az
  • mfcaglar adlı kullanıcıyı işe alın

Selam , işte bazı çevrimdışı freelancerlar

Selam , işte "" anahtar kelimeleriyle eşleşen bazı çevrimdışı freelancerlar