Filtre

Son aramalarım
Şuna göre filtrele:
Bütçe
ile
ile
ile
Tür
Beceri
Diller
    İş Durumu
    90 arm9 project iş bulundu, ücretlendirmeleri EUR

    Есть софт, скомпилированный и собранный под ARM9 Freescale imx287. Необходимо мигрировать его на другое устройство (в наличии имеется raspberry pi 3, ее можно выбрать как цель). Исходники есть. Развертывание софта выполнялось скриптом, все в наличии.

    €14 - €23 / hr
    €14 - €23 / hr
    0 teklifler

    Есть софт, скомпилированный и собранный под ARM9 Freescale imx287. Необходимо мигрировать его на другое устройство (в наличии имеется raspberry pi 3, ее можно выбрать как цель). Исходники есть. Развертывание софта выполнялось скриптом, все в наличии.

    €695 - €1390
    €695 - €1390
    0 teklifler

    Our company is working on IP CCTV Camera development on the Linus platform, which included functionality like storing recording in SD card, watch live and recorded video through mobile application (Android application), Connect through Ethernet or WiFi and motion detection. We will use Anyka AK3918 Arm9 board. Anybody interested and more information about the project can ping me. Thanks

    €745 (Avg Bid)
    €745 Ortalama Teklif
    1 teklifler

    The job is to help me debug with the existing code and make some changes according to my needs. All the documents, SDK and examples are available too. project involves jpeg encoding, video encoding, file system access and some other house keeping stuff. All the tasks have been tested individually and some parts are working with bugs that need to be cleared. This is an ARM9 series processor with code written on Keil in C. you will be working remotely on my PC. After finishing the job I need you to be available for at least one month for after job support. Must have relative technical skills and good spoken skill in English or Hindi.

    €276 (Avg Bid)
    €276 Ortalama Teklif
    7 teklifler

    The job is to help me debug with the existing code and make some changes according to my needs. All the documents, SDK and examples are available too. project involves jpeg encoding, video encoding, file system access and some other house keeping stuff. All the tasks have been tested individually and some parts are working with bugs that need to be cleared. This is an ARM9 series processor with code written on Keil in C. you will be working remotely on my PC. After finishing the job I need you to be available for at least one month for after job support. Must have relative technical skills and good spoken skill in English or Hindi.

    €176 / hr (Avg Bid)
    €176 / hr Ortalama Teklif
    10 teklifler

    Our company is working on IP CCTV Camera development on the Linus platform, which included functionality like storing recording in SD card, watch live and recorded video through mobile application (Android application), Connect through Ethernet or WiFi and motion detection. We will use Anyka AK3918 Arm9 board. Anybody interested and more information about the project can ping me. Thanks

    €639 (Avg Bid)
    €639 Ortalama Teklif
    2 teklifler

    HI, I have 400 printed circuit boards with ARM9 Microprocessor EP9302-CQZ - 208LQFP mounted to fix. The plates are basically application of ARM9. I need software that checks that all peripherals are working correctly. Peripherals: Memory K4S511632D-UC75SDRAM 133MHZ 32Mbitx16 - 54TSOP-II MT29F8G08ABABAWP: B NAND Flash 8bit 8Gb 3.3V - 48TSOP KSZ8721BL PHY 10/100 3.3V - 48LQFP CI MAX324 3ECDBR RS32 3/5 Tranciever ISL1208IB8Z-TK I2C RTC BATT BACKED CI EPRON 24LC256-I / SM - SMD SOIC08 (24LC512)

    €1048 (Avg Bid)
    €1048 Ortalama Teklif
    4 teklifler

    HI, I have 400 printed circuit boards with ARM9 Microprocessor EP9302-CQZ - 208LQFP mounted to fix. The plates are basically application of ARM9. I need software that checks that all peripherals are working correctly. Peripherals: Memory K4S511632D-UC75SDRAM 133MHZ 32Mbitx16 - 54TSOP-II MT29F8G08ABABAWP: B NAND Flash 8bit 8Gb 3.3V - 48TSOP KSZ8721BL PHY 10/100 3.3V - 48LQFP CI MAX324 3ECDBR RS32 3/5 Tranciever ISL1208IB8Z-TK I2C RTC BATT BACKED CI EPRON 24LC256-I / SM - SMD SOIC08 (24LC512)

    €430 (Avg Bid)
    €430 Ortalama Teklif
    3 teklifler

    HI, I have 400 printed circuit boards with ARM9 Microprocessor EP9302-CQZ - 208LQFP mounted to fix. The plates are basically application of ARM9. I need software that checks that all peripherals are working correctly. Peripherals: Memory K4S511632D-UC75SDRAM 133MHZ 32Mbitx16 - 54TSOP-II MT29F8G08ABABAWP: B NAND Flash 8bit 8Gb 3.3V - 48TSOP KSZ8721BL PHY 10/100 3.3V - 48LQFP CI MAX324 3ECDBR RS32 3/5 Tranciever ISL1208IB8Z-TK I2C RTC BATT BACKED CI EPRON 24LC256-I / SM - SMD SOIC08 (24LC512)

    €385 (Avg Bid)
    €385 Ortalama Teklif
    3 teklifler

    Hi, I am looking for an embedded expert who can merge codes and add some new functions. This is a custom ARM9 board running on RTOS for video encoding, bare metal for JPEG encoding etc. all these tasks are already been implemented and tested individually. SDK is available with examples. Tasks: 1. Establish uart connection to store some data. Data will have info like Date, time, GPS coordinates and serial number. These four info will be used to be embed on image and video. On video it is already done. You will need to implement on image. 2. Command from uart to copy data from SD card to USB drive and another command to flush data on SD card. 3. Merging Video, image and above codes together You must have Keil IDE with arm compiler and I need you to be available for next 2 months in ...

    €283 (Avg Bid)
    €283 Ortalama Teklif
    4 teklifler

    Programming Languages EMBEDDED C, C++, SHELLSCRIPTING, PYTHON Operating Systems WINDOWS, LINUX, ANDROID Micro Controllers ARM_CORTEX_M3 & M4, PIC, AVR Microprocessors ARM9 &ARM11(AM335X, BCM2837, SP4418), EC-20 GNU/Linux tools GCC, GDB, ABD ,VIM CSCOPE Protocols UART, SPI, I2C, TCP/IP, DLMS, MQTT Modules RFID, GSM, GPS, WI-FI & BLUETOOTH Simulation Environment PROTEUS, LT SPICE Programming Environment KEIL, ATOLLIC, MPLAB, ARDUINO, LINUX Environment : Open Linux, EC20, MQTT , TCP/IP, DLMS Centralized control monitoring system is street light automation system, this ensures that street lights are automatically switched on once the sun sets and switched off after dawn. The system also sends alerts for each light that needs atten...

    €145 (Avg Bid)
    €145 Ortalama Teklif
    12 teklifler

    Hello, I have a board running on ARM9 which is currently taking video and saving it on a SD Card running on RTOS. Task is to take JPEG images from the sensor instead of encoding video. Docs and SDK with examples are ready. If you do it I have more tasks. thanks.

    €98 (Avg Bid)
    €98 Ortalama Teklif
    6 teklifler

    Looking for a programmer who can: Code an ARM Application processor with out the OS (Linux). It could be an RTOS or a Non-RTOS based on your choice. Processor would be for ...programmer who can: Code an ARM Application processor with out the OS (Linux). It could be an RTOS or a Non-RTOS based on your choice. Processor would be for example imx6, ARM9 or similar. The job is to encode 720P raw video from the sensor and save to sd card. It will also take the image if configured so. After this the processor will go in to power saving mode. and with an external trigger it would repeat the job. Other than above, we need to copy video and images from sd card to a USB storage. Lets discuss in details and please bid only if you have good experience. Note: This is not An Arduino or raspberr...

    €305 (Avg Bid)
    €305 Ortalama Teklif
    10 teklifler

    We have a .Net C# based software that runs on Windows platform. We need it to be ported in .NetCF C# for (Compact Framework for Windows CE, WEC7 to be exact). The software actually uses RS232 port to program a microcontroller from a PC. We are trying to replace the PC and use our Windows CE terminal instead. It is expected that you have Windows CE simulator to test the port. As you don't have the hardware to test, I expect that you test run the software in your simulator and resolve all the compilation errors and I can test the port and give you feedback.

    €174 (Avg Bid)
    €174 Ortalama Teklif
    3 teklifler

    Hello, Fre...system design and development. This project is aimed to design and develop intelligent IP camera for special image processing like face recognition, ANPR, and so on. ANPR camera are already released and in sales now but it can be used only at parking place as the image processing speed is slow. As for the Intelligent Camera that I want, the resolution of the designed camera should be around 5MP, and the it should work as fast as possible. You can use one or more ARM9, 11, Cortex Series to make it work fast. Especially this Intelligent Camera for ANPR should work in real time, so it should work fast as the car's speed is over 80km/h on Highway. Please read carefully before bidding and place bid if you can do. And put correct price for this project...

    €561 (Avg Bid)
    €561 Ortalama Teklif
    6 teklifler

    I need you to develop some software for me. I would like this software to be developed for Windows using C or C++. I am doing project for sound effects and I need to have code for reverse effect code using bored OMAP-L138 DSP +ARM9

    €22 (Avg Bid)
    €22 Ortalama Teklif
    3 teklifler

    We have a c function that needs to be converted into assembler to study if we can reach certain timing requirements.

    €28 / hr (Avg Bid)
    €28 / hr Ortalama Teklif
    5 teklifler

    we hebben een zeer tijd-kritische routine in c, die moet worden geoptimaliseerd in assembler op een ARM9 core.

    €30 / hr (Avg Bid)
    €30 / hr Ortalama Teklif
    1 teklifler

    El proyecto consiste en diseñar o modificar un driver para un sensor de imagen CMOS para utlizarlo con un micro iMX6 de NXP (anteriormente Freescale). El iMX6 es un quad core ARM9. Corre un sistema Linux basado en Yocto.

    €19 / hr (Avg Bid)
    €19 / hr Ortalama Teklif
    2 teklifler

    design and analysis the schematics PCB design of ARM9 and ARM7 based processors

    €135 (Avg Bid)
    €135 Ortalama Teklif
    11 teklifler

    I am after someone who can fully reverse engineer an ARM910 firmware dump back to intelligent C++ source code which would then be able to be re-compiled and loaded and run on the ARM910 as the original dump does. I do NOT need a Hex-Rays output, I need the whole source code to have intelligent, understandable variable names and function names and be FULLY commented as to what each variable and function is and does. I have included the dump file.

    €95 (Avg Bid)
    €95 Ortalama Teklif
    5 teklifler

    I am after someone to create a SEGGER RAMCode file to suit a JLink running JFlash software for an ST ARM9 STR911FAW44X6 booting from bootbank 1 with external NAND Flash MT29F4G08ABADA. I also need the same for a STR910FAW32X6 booting from bootbank 1 with external Micron NAND Flash MT29F2G08AAD. I have included the RAMCode SDK. I need it done urgently and I am willing to pay reasonable price to anyone who can do what I ask. If you look at the SDK and can do it straight away then do it and let me know and I can organize payment to you straight away. If you need more info let me know.

    €17 - €146
    €17 - €146
    0 teklifler

    I have an ARM9 based circuit which has a method to upload a new firmware file to it. I have the firmware file and can upload it into the ARM9. However there is also a bootloader which is not part of the firmware and is located in bank 1 and the ARM9 boots from bank 1. The firmware gets copied to bank 0. I want to do a complete memory dump using JTAG but the ARM9 has the security flag set which prevents this. So basically what I want is someone to inject code into the firmware file, which I supply, and then when uploaded into the ARM9, gets called from the bootloader and would clear the security flag and allow me to access the ARM9 memory using a JTAG interface. I need someone who has a good understanding of the ARM9 and writing assembly code...

    €64 (Avg Bid)
    €64 Ortalama Teklif
    1 teklifler

    ARM7,ARM9,AVR,MSC51 FreeRTOS, Linux

    €28 - €232
    €28 - €232
    0 teklifler

    ...PPP/GPRS communication We are using a hardware platform from Digi. RTOS is NET+OS and cpu is an arm9 NS9215. It is advantage if you have experience with NET+OS but it is not a requirement. Our chief programmer/architect will assist in the initial familiarizing of the code base and provide some help. Other than that we looking for somebody that both can work independently with tasks as well as together with our chief programmer. There may also be tasks to test software version that are to be released. It is important that you been working in software projects and know tools like GIT, Bitbucket etc. Quality code with documentation and unit testing are important. We will start with project with start up task including setting up the environment, familiarizing wi...

    €19 / hr (Avg Bid)
    €19 / hr Ortalama Teklif
    13 teklifler

    I need someone who have access to IDA Pro Hex Rays (with decompiler for ARM processors). I have 2 binary files used in programming ST Microelectronics ARMv7 and ARM9 microcontrollers respectively, and I need them to be disassembled and decompiled to obtain pseudo-code. Will use the pseudo-code to analyze program flow and determine code segments which will be modified to obtain additional functions from previous version of code. I need the disassembly file and the pseudo code within 1 or 2 days. Any more questions please message me

    €113 (Avg Bid)
    €113 Ortalama Teklif
    4 teklifler

    I need someone who have access to IDA Pro Hex Rays (with decompiler for ARM processors). I have 2 binary files used in programming ST Microelectronics ARMv7 and ARM9 microcontrollers respectively, and I need them to be disassembled and decompiled to obtain pseudo-code. Will use the pseudo-code to analyze program flow and determine code segments which will be modified to obtain additional functions from previous version of code. I need the disassembly file and the pseudo code within 1 or 2 days. Any more questions please message me

    €206 (Avg Bid)
    €206 Ortalama Teklif
    1 teklifler
    driver post Bitti left

    ...design of electronics. For the microcontroller design, Pic16, Pic18 (H-Tech picC) series, Arm7, Arm9, Cortex M3 (Keil or Iar compilers) are acceptable. (I have ICD3, ulink2, jlink programmers). If you prefer, you may use a RTOS such as ucos2, but before I should confirm the RTOS. The wiring should fit ECMA series motors. Overvoltage, undervoltage, overcurrent, ESD protections should be included. Sample software and full command set will be given to control the driver. Please check ASDA-B series drivers from delta motion web site. I do not need all advanced options, but you will see what I need. The freelancer may supply a prototype, or I'll manufacture a prototype before paying for the Project. You should prove your experience to get the job, please give references ...

    €695 - €1390
    €695 - €1390
    0 teklifler

    ...design of electronics. For the microcontroller design, Pic16, Pic18 (H-Tech picC) series, Arm7, Arm9, Cortex M3 (Keil or Iar compilers) are acceptable. (I have ICD3, ulink2, jlink programmers). If you prefer, you may use a RTOS such as ucos2, but before I should confirm the RTOS. The wiring should fit ECMA series motors. Overvoltage, undervoltage, overcurrent, ESD protections should be included. Sample software and full command set will be given to control the driver. Please check ASDA-B series drivers from delta motion web site. I do not need all advanced options, but you will see what I need. The freelancer may supply a prototype, or I'll manufacture a prototype before paying for the Project. You should prove your experience to get the job, please give references ...

    €1334 (Avg Bid)
    €1334 Ortalama Teklif
    11 teklifler

    We need a new remote printing software for POS terminal. Server sends the print data to the terminal. POS Technical Characteristics: Model: Just M3000 Microprocessor: ARM9 32bit Memory: SDRAM 16MB, Flash 8MB/128MB Communication: GSM/GPRS module,900/1800MHz (CDMA, WIFI, dial-up modem optional) Backlit graphic screen: 128x64pixels, LED backlight, 16-grade gray Keypad:18 silicone key, dust proof Port: 2 RS232, 1 PSTN (RJ11 56kbps Modem),1 Ethernet (10/100 BaseT), 1 USB Host Base printer: High-speed thermal printer, width 58mm, roll ø40mm Development tool: SDK based on C language

    €226 (Avg Bid)
    €226 Ortalama Teklif
    6 teklifler

    Processor 32 bit, 200MHz ARM9 CPU Memory 8MB FLASH, 16MB SDRAM Power input 100 - 240 VAC, 50/60 Hz; DC Output 9V 4A 7.4v 1500MAh Li-polymer battery Interface 2 RS232, 2 USB ISO7816, EMV2000 ISO14443 A/B,13.56MHz SIM card slot 1 SIM card slot,4 SAM card slots LCD Resolution: 128x64, backlit Keypad 19 backlit keypad, 4 function keys Communication GPRS 850/900/1800/1900MHz, Modem, ETHENET SDK C language OS JOS Printer thermal, 18 lines per second, roll paper 58mm x 40mm Security 3DES, Master/Session and DUKPT Dimension 200*87*56MM Environment Temperature: 0°- 40°Humidity: 5% - 90% yukarida ozellikleri yazili olan cihaz icin isletim sistemi

    €2568 (Avg Bid)
    €2568 Ortalama Teklif
    5 teklifler

    We are looking to outsource the development of a piece of Windows software we produce that is written in Visual Studio 2010, C#.NET and a piece of embedded firmware we developed in plain C (ARM9). The embedded device and Windows program exchange data with a simple USB flash drive. Both applications are completely written, functional and deployed to a large number of customers. We have a list of bugs and updates we would like to make to the Windows application and the firmware. We can provide complete source code to both applications. The list is attached to this project auction. Here is some more information on how this simple system works. Customers run our Windows program to add various database data and it's all saved onto a plain USB flash drive. The da...

    €6 / hr (Avg Bid)
    €6 / hr Ortalama Teklif
    2 teklifler

    The project consists of developping a web interface for an embedded system. The system is running Linux over an ARM9 architecture. It has AppWeb lightweight webserver. The interface consists of a single page with a JavaScript menu allowing menu and page parts to appear/disappear according to the section/option selected. The database is built with SQLite. It is already populated. The overall squeletton of the interface with the different forms and queries is already done. The developper/designer shall create the interface layout and graphics and integrate these with the corresponding forms and queries. Some forms and quesries may need adaptation. The full solution shall be developped using HTML and JavaScript since the limited processing power of the system cannot handle ...

    €1178 (Avg Bid)
    €1178 Ortalama Teklif
    7 teklifler

    Developer will write the code integrating a web cam and a WiFi module on a micro-controller running uLinux. Coder will login to a computer running MS remote desktop(or anything else you prefer) and develop the MCU connected to it on COM1 port. Hardware dev is done by me. MCU is a Atmel ARM9 AT91SAM2690.

    €28 / hr (Avg Bid)
    €28 / hr Ortalama Teklif
    11 teklifler

    I am interested in Connecting USB printer to Mini2440. I'm working on a project where I have to use a USB printer (Any HP Deskjet printer ) on a Linux Embedded system. Mini2440 have 2xUSB (Host and Slave) connection. I need kernel configured properly (and usb driver - if necessary). The command cat > "hello" /dev/lp0 (or /dev/usb/lp0) that works is sufficient for me. Board: ARM9 (Mini2440-S3C2440). OS: Embedded Linux-2.6.32.2.

    €28 - €93
    €28 - €93
    0 teklifler

    We have sourced a Hi3512 IP video server that we need a custom Firmware built. we need a custom firmware that will provide a high quality rstp of h.264 video stream with no authentication. Our problem with the current firmware is there is no way to update it. Please revise documents before replying to job. Attached is product sheet for IP server.

    €2084 (Avg Bid)
    €2084 Ortalama Teklif
    2 teklifler

    Looking for an embedded Linux developer for a project based on OMAP-L138. The project is under development, and the major task will be to develop some GUI interfaces on ARM9, link with already existing internal resources and data. More details and specifications on the project will be released after skills verification and NDA signing.

    €14 / hr (Avg Bid)
    €14 / hr Ortalama Teklif
    2 teklifler

    Hello! I am looking for a really good C-programmer with experience of - embedded programming - hardware related programming /BSP - some hardware experience is an advantage - communication protocol - PPP/GPRS communication We are using an hardware platform from Digi. RTOS is NET+OS and cpu is an arm9 NS9215. It is not required that you have specific experience with NET+OS. The first project is a minor task. We have implemented the MODBUS protocol in order to access some control equipment. Now we need extend that implementation so we can communicate with another type of equipment (energy meter). When I say it is relatively a minor it is because we need just to read a few data points. We could do it ourselves but this is a way to find somebody that c...

    €278 (Avg Bid)
    €278 Ortalama Teklif
    1 teklifler

    We are looking for C/C++ developers with decent track record in embedded linux development to help us develop a simple application which records video from CMOS camera to SD card (in H.264), monitors a variety of sensors and based on those sensors operates simple motors and valves (connected via I2C bus), similar to a wareho...but then on a smaller scale for a different application. Use of open source software / code is welcomed. Room for additional / continued development to improvements of the software. Ideal candidate has developed similar applications in the past, can port linux and the application on different hardware platforms (ARM based), provide solid documentation in English. System either based on ARM9 or ARM11 CPU (S3C2440A or S3C6410). Full system availab...

    €2377 (Avg Bid)
    €2377 Ortalama Teklif
    12 teklifler

    Hello, We have an ARM9 based project and need the PCB schematic and board design completed. The board will need to be 7cm long x 5cm wide and will need to have 6 to 8 layers. All components chosen should be low profile (minimal weight, size and power consumption). The function of the board will be to connect wirelessly (using wifi or standard 2.4GHz TX/RX), to transfer data, and control motor movements. A small daughter board containing 2 main components will also need to be developed. This daughter board should be minimal in size (~2.5cm long x 1cm wide) and easily attachable to the main ARM9 board. Both boards need to be designed for EMC. Deliverables: We need the final schematics, PCB layout, gerber files, 2-3 prototype boards, board testing repo...

    €1390 - €2779
    Mühürlü Gizlilik Anlaşması
    €1390 - €2779
    16 teklifler

    Our embedded system need of-the-shelf modem for wireless interfacing, both modem has no problem connected using Ubuntu on PC. Embedded linux spec: 1. Kernel: Linux Eddy 2.6.21-rt1 2. OS:Lemonix Real Time Linux 3. Device: Eddy DK V2.1 (ARM9 ARM926EJ-S) Info on Lemonix: [][1]

    €157 (Avg Bid)
    €157 Ortalama Teklif
    1 teklifler

    We have an ARM9 system schematic tat needs to move to the PCB stage. We need PCB layout and possibly schematic adaptation. Major parts of the PCB are : -- ARM9 400MHz 324 TFBGA with 0.8mm pitch -- DDR2 RAM 60 FBGA -- 48 TSOP NAND Flash -- TSOP Ethernet PHY -- GPIOs and serial interfaces Layout must be done using ORCAD software (Layout or PCB designer). Deliverables will be ORACAD PCB files as well as Gerber production files. PCB track length and impedance calculation are also needed. Daily reports are mandatory. Once deliverables ready a follow-up project for prototype manufacturing will be requiered.

    €1141 (Avg Bid)
    €1141 Ortalama Teklif
    15 teklifler

    We have an ARM9 system schematic tat needs to move to the PCB stage. We need PCB layout and possibly schematic adaptation. Major parts of the PCB are : -- ARM9 400MHz 324 TFBGA with 0.8mm pitch -- DDR2 RAM 60 FBGA -- 48 TSOP NAND Flash -- TSOP Ethernet PHY -- GPIOs and serial interfaces Layout must be done using ORCAD software (Layout or PCB designer). Deliverables will be ORACAD PCB files as well as Gerber production files. PCB track length and impedance calculation are also needed. Daily reports are mandatory. Once deliverables ready a follow-up project for prototype manufacturing will be requiered.

    €849 (Avg Bid)
    €849 Ortalama Teklif
    18 teklifler

    Aceeca manufactures the MEZ1500 which is rugged handheld computer based on the Garnet OS and WinCE OS platforms. This device supports a proprietary MZIO expansion bus which facilitates custom hardware to be designed and interfaced for specific vertical applications. Project Objective --------------------- This project involves the creation of a MZIO Camera module based on the CAMIF/I2C interface available on the MEZ1500. The camera will be used by Aceeca's customer for the purpose of taking still pictures, with an expected minimum preview size of 320x240 at 5fps or higher. The final picture taken needs to be crisp and sharp as the usage scenario requires good legibility, at a resolution equivalent to 1280x1024 or higher. Scope of work ------------------ 1. ...

    €463 - €1853
    Özellikli Mühürlü
    €463 - €1853
    10 teklifler

    To hire the services of capable hardware engineer who can design hardware for handheld terminals based on Atmel ARM9 (91sam9263 or 91sam9g45) or similar arm9 solution having various peripherals like biometric, touch lcd, gsm, gps, thermal printer, smart card etc. The job will include preparation of schematic, pcb design and validation. The targeted hardware is to be used for handheld terminal/pos and will have os (linux/win/android). The hardware engineer should preferably be having experience in similar design having put in reasonable years doing similar job and must mention his credential in the bid document. We may provide reference schematic of the eval board but that schematic will only be partial as far as our desired product is concerned. The complete schematic has to...

    €541 (Avg Bid)
    €541 Ortalama Teklif
    8 teklifler

    We have an ARM9 based design and need the PCB layout done. Project major components: - LPC3250 CPU, BGA296 package 0.8mm pitch, 266MHz operating speed - NAND flash, BGA63 package 0.8mm pitch, 8-bit interface - DDR SDRAM, BGA60 package, 0.8mm pitch, 16-bit interface - USB 2.0 full speed host (12Mbps) - Buffered general purpose parallel inputs and outputs - NV serial SRAM Schematic design already exists, and can be modified where needed as the board layout progresses. We expect the PCB to be 6-8 layer, aiming for size approx. 8cm x 6cm or smaller. Use of small packages like 0402 and BGA is expected. Final design must meet CE regulatory requirements, so designing for EMC is a definite requirement which will include the design for the shielding “can/s” . ...

    €899 (Avg Bid)
    Özellikli
    €899 Ortalama Teklif
    19 teklifler

    https://www.freelancer.com/buyers/create.php?f= job#skillsSec Our project is "Design of Web based Remote Embedded Monitoring system". we want to develop it with the help of friendly arm9 mini 2440 processor. In this we want to get status of remote are going to use GSM modem, mini 2440 arm9 processor. in this project we also want to control that equipment (toggle switch) after getting its status. suppose if we start the switch then we should get its status as ON/OFF at our mini2440 ARM9 processor. we also have to display that status on web so that we can access it from every where through network. we are already having that mini2440 arm 9 processor but its new for us. hence we are not g...

    €250 (Avg Bid)
    €250 Ortalama Teklif
    4 teklifler

    I require a Windows CE 5 or 6 image building & deploying to an ARM9 SC32440 based board (Embedian APC-7117 with MXM-7114 - ) Embedian does not supply a BSP for WinCE, so you will need to locate a compatible BSP elsewhere which must support audio, USB, serial ports, etc as you would expect. I am unable to get NOR boot to work on this board, so you may need JTAG experience. Experience with LVDS LCS panels is also preferred. You will be required to document all steps involved to build the image, deploy to the board etc., and be able to provide support via email for at least 1 month after completion of project. I will send full details and hardware to winning bidder.

    €734 (Avg Bid)
    €734 Ortalama Teklif
    4 teklifler

    I need a USB printing Utility for my ARM9 Board (AT91SAM9260 or S3C2440) on these boards OS: Embedded Linux 2.6.x Target: ARM9 Printer Support: Any HP Laser jet printer

    €116 (Avg Bid)
    €116 Ortalama Teklif
    2 teklifler