Displacement işler

...Environment for MATLAB. ˆ Adapt the example using the material properties (E- Young’s modulus) of the three bars are random with µX = 200.0 GP a, σX = 10 GP a, Θ = 10. ˆ Generate a random field of length three. Assign the computed random material properties to the three bars and repeat the computations. ˆ By which probability does the vertical displacement at the point of loading exceed 1.2 mm? Perform a Monte Carlo Simulation assuming that a displacement larger 1.2 mm would lead to failure. What is the corresponding reliabilty index? ˆ To which values does the standard deviation of the field needs to be changed that the reliability index is at least 3.0? (try to find out by repeated MCS). 3. Random Fields and Finite Element Analysis - Heat Flow ...

Hi Nikhil, 1 Bottle, 1 Can. These are pretty standard, but I need them to be identical. The bottle has 5 embossed dots on the front and back of the bottle in line. I need these built into the mesh, not on a displacement. Please make sure all the heights of the cans and tops and bottoms are relative and accurate. Please make the glass of the bottle a single plane not doubled up for my texturing purposes. When there are two planes of glass, light does not properly pass through.

What I need is to simulate a clamped Silicon beam (nanowire) and with 2-um lengths, 0.05-um width, and 0.06-um thickness with COMSOL or Solidworks to find its fundamental resonant frequency and quality factor. I want to do it by applying AC nearby the cantilever to see how it affects the frequency and the displacement of the cantilever

I need you to create a [soil hardening (HS) model] according to the data that I will give you in the form of tables to simulate the soil behaviour of deep excavation in the (program Plaxis 3D ). The case is a comparison of the original model without any stability elements (that is, without using the soil na...tables to simulate the soil behaviour of deep excavation in the (program Plaxis 3D ). The case is a comparison of the original model without any stability elements (that is, without using the soil nail) and between the same model in the case of introducing elements of stability (like that is, with using the soil nail). To compare the two cases through the following values: value of horizontal displacement (δh). value of surface subsidence (δv). The value of the m...

Hi, We have a semi-ellipsoid shape with a rigid body indentor. The indentor inserts an 8 mm sine displacement into the ellipsoid. I have simulated half of the shape as it is asymmetric. I got an error while submitting the job and I would appreciate it if you could resolve the error. I need the completed job, and all the files including Cae, jnl and inp files. Thanks

We need to do simple project for in matlab In order to convert rotation motion to linear displacement a rack and pinion system

Determine the formula that gives the piston position relative to the shaft and barrel axis angles. This is equivalent to the piston position relative to crank angle in this Wikipedia page: but instead of a crankshaft engine it is for a variable displacement radial axis piston pump. (this animation does not have a variable displacement but gives an idea of the functionality)

Need help designing a piezo actuator flexure. Total size under 20mmX30mmX4mm. Piezo 3.5mmX9mmX3.5mm with displacment 8.5um will need to produce end displacement near 1mm. Assume wire EDM. Will need model of actuation travel and force to meet requirements. Deisgn package to be dimensioned for quick changes to hinge geometry and other key parameters to test and adjust frequency response

...Atlantic to raise money for Ukraine. I would like the following: 1) A stand alone logo 2) A version with the logo locked to the tagline 3) Simple mockup of logo and tagline on a crew top Team name and tagline: Ocean Force Supporting Recovery in Ukraine Mission: Our mission is to raise awareness and funds in order to combat the ongoing humanitarian crisis in Ukraine. Particular focus is on displacement, lost homes, lost incomes and lack of education. Other information see the attached file or the link: I would like the boat, oars or the ocean incorporated into the design. Milestone 1: Logo with tagline Milestone 2: Mockup of logo on crew top (clothing)...

We are looking for a graphic artist that can make us templates for volleyball, lacrosse, women's softball, wrestling, and track. We want to be able to add your own logo or jersey number, edit shadows, an...make us templates for volleyball, lacrosse, women's softball, wrestling, and track. We want to be able to add your own logo or jersey number, edit shadows, and/or adjust the background. We want to be able to design our own sports uniforms. We need designer-friendly templates that are high-resolution PSD files fully layered, clearly labeled, and well organized. What we need: 1 PSD File 1 Displacement Map Smart objects included 7580 x 5616 px Please see attached samples of white template for other sports that have already been done. We need them for the other spor...

Please do FEA work (stress and displacement) on the attached drawing Rev P8G.

Hello, I need to simulate a compression test for a compression spring. The output would be a graph force-displacement. The spring has a nonlinear geometry (the coil pitch varies trough its length). I provide with the .step file of the spring with supports. See attached file.

I need someone to make for me a full report of a 4 wheel steering mechanism shown in the attachments. I will provide the velocity , acceleration, and displacement analytical graphs of the mechanism which will need to be described in the report. the Number and types of joints, links and types of pairs also has to be mentioned in the report .

Hi, I need some design variations and renders completed on a single hulled displacement craft modified to have ducts in the front and in some cases to the side, a bit like the intakes of modern fighter planes (e.g. F35) (but not the wings and tail) with the hull of :ANd9GcRoqrCkPtv72AAOgQqL8ANt_IMotiRnUTFEjKyDzKA8xJUzAt-my-uEjJjpZMB_6YTqJxo&usqp=CAU (but not the large bridge building). Hull and Craft shape can be altered as you see fit and full creativity and multi hull and multi propulsion around the hull is welcome. Most importantly it needs to look cool and semi plausible and not immediately identifiable as anything else that exists. Keen to have some kind of cad and or source for the winning

We are searching a people who having experience with Linear sensor and displacement measuring sensor developer with sound knowledge in MCU and Sensors. m18,m30 analogue output sensors with 0.25% accuracy with amplifier unit ..

Write code to calculate vertical displacement using MPU6050 sensor. Code shall integrate the acceleration on the MPU6050 accelerometers to calculate distance moved in the x, y, z direction. Code shall use the MPU6050 gyroscope to know which way is vertical (i.e. axis parallel to gravity, g). With information from gyroscope it shall then be able to calculate distance moved in the g direction i.e. the vertical displacement . To test the code I will: - lift the MPU6050 1 meter off the ground - the vertical displacement shall read 1 meter. - I will then put the MPU6050 on the ground - the vertical displacement shall read 0 meters. - I will then lift the MPU6050 1 meter off the ground in a different orientation - the vertical displacement shall again read ...

...shadow that extends to the right. color and length of box should be editable. We'll call this displacement Looking to have the indicator always show the high volume candles and breaks of structure, but only show the imbalances if 1. an old high or low was traded above and price changed direction, 2. there was a displacement candle that also had higher than average volume, and the break of structure intersects that displacement candle. Should be able to adjust how many imbalances there are visible back in time. Imbalances should not be labeled, just shown as block Breaks of structure should be labeled BoS Volume candles no label, just color change Sweep of old low or high before displacement not shown on indicator I understand that the indicator I ...

...shadow that extends to the right. color and length of box should be editable. We'll call this displacement Looking to have the indicator always show the high volume candles and breaks of structure, but only show the imbalances if 1. an old high or low was traded above and price changed direction, 2. there was a displacement candle that also had higher than average volume, and the break of structure intersects that displacement candle. Should be able to adjust how many imbalances there are visible back in time. Imbalances should not be labeled, just shown as block Breaks of structure should be labeled BoS Volume candles no label, just color change Sweep of old low or high before displacement not shown on indicator I understand that the indicator I...

Any gurus who can help me? I have a Omron ZX1-LD300A61 or Panasonic HG-C1400 laser displacement sensor, and a DM542 driver + motor. I want the module to set a fixed height, say 25m from sensor to base. And when I put something under the sensor, say 10cm high object, and I need thesensor to raise the tower 10cm up so it is still 25cm from sensor to object. When I remove object it goes down. Ideal is to add 3 buttons. One UP button, when pressed motor turns up One DOWN button, when pressed motor turns down One for Auto, you activate the sensor for raising/lower the tower to 25cm or whatever it is saved in memory. So it needed to be manually set to a height. Maby add a 4th button for save heigh when programming sensor? That is you use up and down buttons to set the correct height, a...

...that we can find the source and copy and paste rather than retyping. - Redesign any use of clip art into suitable branded iconography (guidelines provided ) - Supply document both as PDF and Word doc - All files need to pass accessibility checks!! - The word doc must be as per the design file, so it will need to be checked carefully to ensure there are no displacement issues or grammar errors. - Package design files, so we have hard copies, along with images neatly packed up into one folder DOCUMENT 2 (Booklet for GSH-ED trainees - Final) - Redesign word doc into clients branding (Brand guidelines provided- to follow style of pages from the full guide) - approx 18pages total - Retype jpeg content provided within the word doc (approx 2-3 pages- to form the

find * Unit Displacement Method • Moment Distribution Method, and • Direct Stiffness Method all include steps and moment diagram and shear and normal the project must be very clean and professional i upload 2 documents 1- project details 2- how the project should look like or similar work

...______________________________ ENGINE LENGTH UNDRESSED: 3.18898 Foot (972 millimeters) ENGINE LENGTH DRESSED: 3.667979 Foot (1,118 Millimeters) ENGINE HEIGHT UNDRESSED: 2.71325 Foot (827 Millimeters) ENGINE HEIGHT DRESSED: 3.14961 Foot (960 Millimeters) ENGINE WIDTH UNDRESSED: 3.489271654 Foot (1063.53 Millimeters) ENGINE WIDTH DRESSED: 3.9 Foot (1188.72 Millimeters) CONFIGURATION: 72° W24 DISPLACEMENT: 13L to 18L (794.22–916.16 cu in) CYLINDER BORE: 4.96063 Inches (126 Millimeters) PISTON STROKE: 4.96063 Inches (126 Millimeters) TOTAL STROKES: 4 BLOCK MATERIAL: C-103 NIOBIUM ALLOY (which will be composed of 89% niobium, 10% hafnium and 1% titanium) HEAD MATERIAL: C-103 NIOBIUM ALLOY (which will be composed of 89% niobium, 10% hafnium and 1% titanium) VALVETRAIN: SEXOH...

I need to design an electromagnetic harvester with stretching as well as bistability induced due to attractive and repulsive magnetic force in Ansys. The simulation study needs to show t...need to design an electromagnetic harvester with stretching as well as bistability induced due to attractive and repulsive magnetic force in Ansys. The simulation study needs to show the effect of attractive and repulsive force on the frequency response of electromagnetic generated power and voltage in the coil vs frequency. The effect of attractive and repulsive forces on the applied force vs displacement plot for different spacing between magnets needs to be studied. The design of the electromagnetic harvester can be a simple model in reference pdf just to understand the use and concept in Ansys...

I need to design an electromagnetic harvester with stretching as well as bistability induced due to attractive and repulsive magnetic force in Ansys. The simulation study needs to show t...need to design an electromagnetic harvester with stretching as well as bistability induced due to attractive and repulsive magnetic force in Ansys. The simulation study needs to show the effect of attractive and repulsive force on the frequency response of electromagnetic generated power and voltage in the coil vs frequency. The effect of attractive and repulsive forces on the applied force vs displacement plot for different spacing between magnets needs to be studied. The design of the electromagnetic harvester can be a simple model in reference pdf just to understand the use and concept in Ansys...

...built in HTML, PHP, MySql. It will have the following components: 1) Event Management Create, Delete, Modify event name, Logo, Date, Location 2) Entrant Management Create, Delete, Modify entrant details including: -Team Name -Team Logo -Class -Driver Surname, Firstname -Navigator Surname, Firstname -Major Sponsor Name & Logo -Minor Sponsor Name & Logo -Engine details, including cylinders, displacement, induction type, power output -Pump Brand 3) Class Management Create, Delete, Modify class name, Logo 4) Race Management User will select entrant from a list, press "Load Entrant" button. The entrant details such as team name, driver and navigator names, class will display. The entrant will then race. The integrated time result will be shown to the user on scr...

PROJECT IS DUE IN 7 HOURS A worm gearset is needed to reduce the speed of an electric motor from 1800 rpm to 50 rpm. Strength considerations require that 12-pitch gears be used, and it is desired that the set be self-locking. Select a set that accomplishes this task. Then in order ...accomplishes this task. Then in order to couple the output of the worm gear, Design a gear train that yields a train value of +50:1. From interference criteria, no gear should have fewer than 15 teeth and, due to size restrictions, no gear can have more than 75 teeth The output of the drive train will drive a crank shaper that will generate a 3 to 1 rapid return system moving a slider with a total displacement of 6 inches. Design the 3 phases of the project, including: Worm Gear Drive Train Cra...

Hello, I am in need of ...file that I can read in Python/Matlab to filter data. I have no experience with Web Scraping but I need to organise the data The website has 8655 different sailboats, the search page shows 25 sailboats per page and there is 347 pages. The deliverable would be to create a table with each row being a sailboat model and each column the sailboats' information, Length, Displacement, Beam, Year Built, Sail Area, Sail Particulars etc.. AS many as possible See picture below to see the type of data I need (using metric units) and a mix of words and numbers. The website is not organised so there will have to be some character matching to ensure the data is in the correct location. I am just passionate about sailboats not doing this for money.

This is a small project about the calculation of deceleration displacement rate of fast train. If a fast train is running on a straight track and power is disconnected. After 600m what will be speed of train? and what will be deceleration displacement of this speed loss?

I am looking for someone who is skilled in blender 3D animation work. I have a project that requires some shader displacement configuration work for some assets. As well I need someone to configure all of the files and assets into an autogeneration folder where we can auto generate our collection

ONLY EXPERTS AND WITH EXPERIENCE IN THIS WORK,...the fundamental period of the seismically isolated tank, the period of the impulsive and convective mode. • Obtain the hysteresis curve of the two types of seismic isolators, recorded by the analysis with the earthquake. • Analysis of stresses and deformations due to earthquake. • Maximum efforts in the tank wall for an acceleration input vs. weather. • Maximum splash height. • Maximum displacement. • Video training on how to run the model and how the full modeling was done in ABAQUS. • Correctly model the two types of seismic isolators, considering the horizontal and vertical hysteretic behavior. • A video tutorial on how to edit the earthquake in ABAQUS, to be able to enter different e...

I need somebody to help me in the next few hours to plot force-displacement from a 3-point bending model. 30 mins to 1 hour live support

We are manufacturer of UTM machine and testing equipment. we need a testing machine software. we are using PLC and electronic card to operate machine we take all the readings through communication. Load and Displacement. after taking raw data we plot various graph with that data and present report for the same using all the analytical formula and readings. we need to develop best and latest technological software. we have old software for reference and we can start the work with that software modification so you can get clear idea about project. and what we need to do. This project is not one time project we need continues support for same also we can having further project that need same type of software but different application. Requirement: 1. Dedicated timeline for the pr...

ONLY EXPERTS AND WITH EXPERIENCE IN THIS WORK, ...the fundamental period of the seismically isolated tank, the period of the impulsive and convective mode. • Obtain the hysteresis curve of the two types of seismic isolators, recorded by the analysis with the earthquake. • Analysis of stresses and deformations due to earthquake. • Maximum efforts in the tank wall for an acceleration input vs. weather. • Maximum splash height. • Maximum displacement. • Video training on how to run the model and how the full modeling was done in ABAQUS. • Correctly model the two types of seismic isolators, considering the horizontal and vertical hysteretic behavior. • A video tutorial on how to edit the earthquake in ABAQUS, to be able to enter different ...

ONLY EXPERTS AND WITH EXPERIENCE IN THIS WORK, do not ...detect the fundamental period of the seismically isolated tank, the period of the impulsive and convective mode. • Obtain the hysteresis curve of the two types of seismic isolators, recorded by the analysis with the earthquake. • Stress and strain analysis due to the earthquake. • Maximum stresses on the tank wall for an acceleration vs. time input. • Maximum sloshing height. • Maximum displacement. • Video training on how to run the model and how the modeling was done in ANSYS. • Correctly model the two types of seismic isolators, considering the horizontal and vertical hysteretic behavior. • A video tutorial on how to edit the earthquake in ANSYS, to be able to enter different ...

Terms - Bump map/Displacement map - the functions in blender that inputs a bitmap and outputs height changes in the object. You can use either depending on artistic quality. - Diamond shader/material - the material you are tasked to derive or reuse from what you own to apply to the main object Deliveries 1. A single high-detail rendering of a thin square block with a bump map or displacement map induced by the image in attachment, with a diamond shader/material applied to it. 2. The project file associated with this creation in Blender or the software you used to derive this rendering from which the project owner can recreate the rendering. Description - We can create a single rendering of a thin square block rendered from a centered bird-view whose facing surface towards ...

The project is to design a PI controller for the displacement of a load element. The simple model of the system is shown above with a mass ? in addition to the viscous damper whose damping coefficient is termed as ?. Assume the input is the force ? in Newton, and the output is the displacement ? in meter. The project is to design a PI controller for the displacement of a load element. The simple model of the system is shown above with a mass ? in addition to the viscous damper whose damping coefficient is termed as ?. Assume the input is the force ? in Newton, and the output is the displacement ? in meter.

I need someone who can do all of the above in 2 days' time.

Part 1:Mesh Convergence study Using the FEM Software LUSAS, build the following model of a concrete beam with a Global Distributed Load. Use the FEM Software to estimate the value of the displacement at the midspan of the beam. By confronting the FEM results with the analytical solution for the considered case, check the effect of the number of mesh elements on the final solution. a. Estimate the analytical solution for the considered case. (Please use the material properties according to LUSAS Database). b. Starting from a number of mesh elements equal to 2, build a convergence graph to show the number of elements necessary to reach the convergence to the real solution of the problem. (Increase the number of elements of 2 for each iteration, i.e. 2, 4 ,6 and so on). c. Commen...

I would like to know how to obtain the rotational displacement in Ansys for a cylinder part

After Effects and Photoshop skills are required. Need to make 4 videos 30 second animation for Social Networks (TikTok, Youtube Shorts, etc.) from history photos. 1. Collect Photos from the following ...article (there are 50+ images, so you may use 10-15 for each video): 2. Cut out castle in Photoshop, separate other parts in layers and adjust photos. Convert images into smart objects so you can make nondestructive edits; 3. Make animation of appearing images one by one to make a story (you can use After Effects displacement, grange, vintage or any other transition effect); 4. Add text subtitles (I will provide all texts for each video). 5. Render and save video to 1080×1920 h.264 format (small file size).

...following complete dynamics of the plane when it turns or performs any mid air activity. Even when flying straight there will be turbulence - little random movements. So attention to detail in aircrafts only. No flaps animations details needed. You need to animate a single overall controller of the jet. 3. Add a panoramic sky JPG (no HDR needed) and make easy terrain via heightmaps (geometry displacement) according to the given storyboard. Need not be accurate or textured, just of similar feeling. Same for clouds. Simple cut out clouds (texture planes) to be used as placeholders when required. All storyboards, models and rigs will be provided (other than terrain). Initial training for how to do it quickly and accurately will be provided. Let us know your monthly cost for hi...

We are looking for a Python developer experienced with Blender (3d) environment. We need a script that will: - Reader instructions from a CSV file to set parameters in Blender, such as display/hide objects, set values such as displacement maps path, colors, material parameters, etc. (ex: 1 parameter = 1 column in the CSV file) - Create frames for each set of parameters (ex: 1 frame = 1 line in the CSV file). The script should be able to handle ~1000 frames (set of instructions). The 3d scene (objects, settings) is already created in Blender. Note that some parameters can be in our render engine (Octane). We will need to work iteratively to ensure that all parameters are well managed and set accurately in Blender. Please reply by explaining your understanding of the project and s...

Using openseespy i must build A 3D one story with 4 columns and one slab with 4 fixed supports in each column. It should be made from concrete. We should apply the time h...made from concrete. We should apply the time history analysis for it and diaphragm. The dimensions are: # for columns b_col = 0.40 # column base h_col = 0.40 # column height # for beam b_beam = 0.30 # beam base h_beam = 0.55 # beam height slab thickness = 0.15 m Also, we should plot it and find the period and the displacement for the free nodes. add earthquake on the building using Imperial Valley-02, 5/19/1940 records. all what we must find: 1- Displacement. 2- velocity. 3- Acceleration. 4- Ructions. at every single node. 5- Mode Shape and the period. Then compare the answer with the Imperial...

Looking for someone to develop a code in matlab to find out the natural frequency and displacement of a beam model

I need to simulate some numerical results for a scientific article. I have two options of cast-in channels that need to be subjected to a tension force that simulates pull-out from concrete. After that I will need to compare results. What is required is VM Stress and and Deflection/Displacement for each of the two, one for the steel and one for the concrete. I have the Abaqus model built for both options, it needs a look at meshing, boundary conditions and load application.

...of wind on the blades and to the generator weight; No Computer Fluid Dynamic calculations are required for this step, instead use primitive shapes to determine the time dependent effects of wind and gravity. 3) Select the tower geometry (e.g. constant of variable cross-section) and material (e.g. concrete or metal alloy, or composite, or combination of different materials); 4) Determine the displacement boundary conditions at the connection of the tower with the foundation. These time dependent boundary conditions have to be estimated by assuming a foundation system of primitive shape. 5) Justify the element choice when building the tower model. Remark: make the assumptions that you believe are necessary to solve the problem. More instructions Report prepare a technical report th...

...development & design. He/She must have knowledge about detail stepper motor capability. we will give he our requires shaft displacement shift (various range in cm/min). To taking this information engineer have to design shaft & gear. give us information regrading need for RMP stepper motor to set which is Controle by software. so that we can control shaft displacement for at desire rate via MCU software. Engineer also have to provide information regarding stepper motor available in market which we can use in our project. Stepper motor is size and weight in our range. in Summary we will provide information of size and weight of stepper motor & shaft displacement rate(cm/min)(various 25-30 rate) rest of all other mechanical development (mainly gear...

I am a Structural Engineer myself but new to STAAD.Pro. I need a experienced user to help me Figure out what is wrong with my current model. I do not need a report just a check on the model whether the sections used are not enough, the shape of the truss, the load application method etc. as it is giving me unreasonable node displacement values The project is a simple 52 m x 0.9 m x 2.5 m steel truss which will be used as a parapet and it will be carrying just aluminum cladding panels. the structure is on a height of 32 m from the ground. Final deliverables: A file with Safe results using not so far off section sizes from the ones already used in the attached file.

Validation of inverted crank slider mechanism for both MSC ADAMS View and MATLAB. Since, there will be formulation for inverted crank slider mechanism which is to formulate in MATLAB .m file. There is a ADAMS file .bin which informations regarding joints and lengths of linkages. Consider slider as a link and consider friction between slider and slotter. Find out...be formulation for inverted crank slider mechanism which is to formulate in MATLAB .m file. There is a ADAMS file .bin which informations regarding joints and lengths of linkages. Consider slider as a link and consider friction between slider and slotter. Find out the dynamics of the mechanism (joint forces in X,Y,Z Direction and torque in x,y,z direction) followed by its kinematics (angular displacement, velocity and acce...

Its application is pallet handling in the warehouse. Its all required electrical and electromechanical components like LiDAR sensors, controllers, batteries, motors, wheels, castors are selected and CAD files are available. What is needed from you is mentioned below 1. Design of chas... wheels, castors are selected and CAD files are available. What is needed from you is mentioned below 1. Design of chassis (sheet metal) such that it can carry 1200kg at a speed of 1m/s and 400kg at 2m/s. 2. Mounting of conveyor module and all electrical components which are available 3. Aesthetic parts such as covers and top plate design 4. Material selection suggestion 5. Final stress and displacement analysis 6. Optional: Compact lifting mechanism design for a load of 1200kg Images are attached for...