Int i işler

1. The C code for sort() in the textbook is wrong. A correct version is as follows: for(int i = 1; i < n; i++) { for(int j = 0; j < n - i; j++) { if (v[j] > v[j+1]) swap(v, j); Revise the assembly code for sort(), and insert your assembly code for sort() and swap() into the given program lab1.asm. You need to use SPIM to debug and run the program. Note that swap() and sort() should be two separate functions in the assembly code program. You are strongly suggested to re-use the code in Fig 2.25 and Fig. 2.27 as much as possible and change them only when it is indeed necessary, such as for correcting the error in sort().

...use the passport-local strategy for authentication. Database: Must use a database to persist data. The application you build should also have the components shown below. User Each User will have the following attributes and the specified data type associated with their account: ID: Int, Auto Incremented firstName: String lastName: String username: String password: String Post Each user can submit a Post. A Post contains the following attributes with the specified data type: ID: Int, Auto Incremented authorID: Int message: String timeStamp: DateTime All posts will have an authorID attribute which contains the ID of the original creator of the Post object. Each post by the author (authorized) can be updated and deleted. All users (unauthorized) can read the posts....

Write a C program to take as input (via stdin) a valid assignment statement in C and generate MIPS assembly code to perform the given calculation(s). You can assume that each C variable name is one lowercase letter (e.g., a, b, c, etc.) and of type int. Further, positive int constants are also allowed as part of the given expression. For this script, you only need to support the addition (+) and subtraction (-) operators. Note that you should use isspace(), islower(), isdigit(), scanf(), etc. to parse the input. The MIPS code you generate must make use of registers $s0,$s1,...,$s7 to correspond to C variables and registers $t0,$t1,...$t9 to correspond to any temporary variables you need. Variables in MIPS should match those in C from left to right, meaning that the final resu...

hi , i want someone who understand what am trying to do and can do it fast and not cost a lot . we have QR Reader that is connected to Ingress software the software uploads the Card Number into the Ingressus controller for each user, and when the user performs verification with the relevant QR Code on the QR110C Reader, the QR reader will send the number into the Ingressus controller to check for the existing card number in the device , this is for opening door system anyway we will provide u the Ingress software source code in .VB and .C# . u have the choose to modify it or to copy from it , it have all the function . now the problem is . when we want to register a new user from that app we need to do it manually by entering the userid,name and rest of info to the edit box , w...

We got 3 tables: Project, ProjectWork, Employee Project: Project INT PK, Projectname VARCHAR ProjectWork: Project FK, Emp INT FK, Hours INT, SumHours INT Employee: Emp INT, PersonalId INT, Lastname VARCHAR, Firstname VARCHAR. I need somebody with experience with triggers to give me 3 triggers: - If I insert new project into projectwork table ---> increase sumhours by the hour value i add. - If I delete a project with its primary key (pk), the trigger shall reduce it by the same hours removed in the sumhours column. - if i update the projectwork row, like from 4 to 5 hours, sumhour should go up too. The whole meaning is too have different sumhours for the different project foreign keys in the project...

1. The C code for sort() in the textbook is wrong. A correct version is as follows: for(int i = 1; i < n; i++) { for(int j = 0; j < n - i; j++) { if (v[j] > v[j+1]) swap(v, j); Revise the assembly code for sort(), and insert your assembly code for sort() and swap() into the given program lab1.asm. You need to use SPIM to debug and run the program. Note that swap() and sort() should be two separate functions in the assembly code program. You are strongly suggested to re-use the code in Fig 2.25 and Fig. 2.27 as much as possible and change them only when it is indeed necessary, such as for correcting the error in sort(). 2. If your code does not run or produces result very different from correct one, your sco...

I have a Google Cloud Platform, I will give you access, I need you create a Linux virtual machine with the following services: - Apache - MySQL - PHP Then install and activate what is neeeded to run the Google Translate API, so create a PHP webpage to rear 3 GET variables and perform a translation and show it as text, these are the variables: - fr: Original language - to: Translation language -text: Text to translate For example, if I write this URL: it should show this text: "well done" I need to store the translations in a database called "gcp_trans", in a table called "cache" with this structure: - id` int(11) NOT NULL // PRIMARY AUTOINCREMENT - fr` varchar(10) NOT NULL // original language - to` varchar(10) NO...

i would like to have a MySQL database with 2 tables (users and Transactions) which can be exposed with AWS API Gateway and AWS Lambda. Free lancer who will be assigned the project will have the responsibility to develop a 100% bug free project and will be responsible to submit a step by step guide explaining how to install the code and how to run and execute the code properly. the potential candidate to the project should have previous experience in dealing with AWS. the API developed here should be protected (HTTPS and token) Users table fields: user_id primary key, INT auto increment, phone_number (format +0000000), old_phone_number VARCHAR (format +0000000), created_date TIMESTAMP, network INT, status INT, last updated TIMESTAMP, last_updated_by V...

I own a shoe brand int he US and I am looking to outsource all manufacturing of the shoes. I can pass along the designs and tech packs, but I need a relationship with a reliable factory. I design sneakers specifically.

Configuration for Cisco Wireless Access point Including --AIR-CAP 3702I-E-K9 (802.11 ac Ctrlr AP 4x4:3SS w/CleanAir ; Int Ant ;E Reg Domain .CON-SNT-AP3702IE (SNTC -8X5XNBD 802.11ac Ctrlr AP 4 x Configuration for Adding licenses on Existing Cisco Wireless controller 8540 .including LIC-CT8540-UPG (Top Level SKU for 8540 AP Adder Licenses. LIC-CT8540-1A(Cisco 8540 Wireless Controller 1 AP adder License ). CON-EMCU-LICCT85C (SWSS UPGRADES Cisco 8540 Wireless).

Se necesita desarrollar una aplicacion movil IOS, con una vista que permitar cargar los datos de un recibo en pantalla que serian : 1 - número de cliente (Int) 2 - canal de ventas (Int) 3 - moneda 4 - valor 5 - banco 6 - numero de documento 7 - fecha de cobro La pantalla debería cargar la fecha por defecto, al ingresar el número de cliente que traiga el resto de la información del mismo, la aplicacion deberá leer un archivo en formato excel separado por comas y obtendrá la info para mostrar en la vista (Nombre de cliente en un label). Poder marcar el canal de ventas 1 o 2, cargar el valor por el cual se va a hacer el recibo y que al cargar el valor sea capaz de transcribirlo en letras la misma aplicacion ejemplo : 150 (Ciento cincu...

I need you to develop some software for me. I would like this software to be developed for Windows using WPF C# I will give list of objects like List<tcobject> tclist=new List<>(); tcobject contains: int id; string name; string property 1; string property 2; string property 3; so this list have parent and child ,, parent and child will shown in tree with corresponding attributes values in column shown in attachment. please find the tree structure get the input from list and need to populate tree list view dynamically

For this project, there is one building with 2 flats (one at floor level) and a 2nd one at first floor. I have attached all plans + dimensions What I would need is : 1. 3 pictures of the building from outside a. 2 of the building and surroundings b. 1 with building and partial view of the land in front (using real land picture) 2. 3 pictures of the interiors (from the 1st floor flat) a. 1 of the living-kitchen b. 1 of the living-kitchen with view of outside land through window c. 1 one the master bedroom Please let's discuss it asap. thanks and regards, Dan

Hello, I implemented a print function in webview based my project but it only prints the visible part of the page. This is the function (it is in c# but you can help if you're using java too): var printMgr = (PrintManager)(); builder = new (); (); //some tries if (((int)) >= 21) ("page", ("page"), ()); else ("page", (), ()); I don't find any help on that. Is it possible to print the full page ? Thanks

Integer.MAX_VALUE is the maximum value of a Java int: 2147483647. If you want to work with even bigger integers, you have the option of using the type long, which has the maximum value of Long.MAX_VALUE = 9223372036854775807.

joomla component modifications - NEED DONE WITHIN 24 HOURS PERFECTLY i have 3 very small components that another developer developed that a need a few changes to each i will provide the installable file for you to work from and you should deliver a new installable file for each component task 1 ============================ com_minisite changes ….. please call this component ‘Manage Events’ in the admin menu i need event date on the table here : on x_site we need a new dropdown / select with 3 options Event type : European Days (1) Euroschool (2) Other (3) ALTER TABLE `eu_site` CHANGE `type` `type` INT(1) NOT NULL DEFAULT '0'; also a filter on the listing page : also please

Hello, I need someone help me with this error that I am getting and fix the problem in php Notice: Undefined variable: order in public_html/modules/qbms/ on line 183 on line 183 this is what it said $amount = number_format($order->order_total, 2, '.', ''); $invoiceAddress = new Address((int)$cart->id_address_invoice); $currency = new Currency((int)$cart->id_currency); **$amount = number_format($order->order_total, 2, '.', '');** $stamp = date("YdmHisB"); $orderid = $stamp.'-'.$cart->id; Another error Notice: Trying to get property of non-object in public_html/modules/qbms/ on line 183

Lütfen detayları görmek için Kaydolun ya da Giriş Yapın.

Need to design a lapel pin for annual convention Our name is International Environmental Lawyers Association That is exactly what we do, we are lawyers from around the world that share information, experience and resource on legal environmental issues. Our logo must be round, in colors and contain our full name, the balance, the world and in some other ways green and water. Enclosed is an idea we came up with but your are the exprerts

Hello , I have this Error (500 Server error) it comes from settings in some core files from Prestashop: And also i this Error (500 Server error) displayed when the customer select payment method (PayFort) when start checkout. [PrestaShopException] Invalid product vars at line 106 in file classes/ 101. if (is_array($product) && isset($product['id_product'])) { 102. $product = new Product($product['id_product'], false, $id_lang, $id_shop); 103. } elseif ((int)$product) { 104. $product = new Product((int)$product, false, $id_lang, $id_shop); 105. } else { 106. throw new PrestaShopException('Invalid product vars'); 107. } 108. } 109. 110. // Set available keywords 111. $params = array();

Hello , I have this Error (500 Server error) it comes from settings in some core files from Prestashop: And also i this Error (500 Server error) displayed when the customer select payment method (PayFort) when start checkout. [PrestaShopException] Invalid product vars at line 106 in file classes/ 101. if (is_array($product) && isset($product['id_product'])) { 102. $product = new Product($product['id_product'], false, $id_lang, $id_shop); 103. } elseif ((int)$product) { 104. $product = new Product((int)$product, false, $id_lang, $id_shop); 105. } else { 106. throw new PrestaShopException('Invalid product vars'); 107. } 108. } 109. 110. // Set available keywords 111. $params = array();

This Job is about the Next Four Tasks. 1) I have this, what you can see in the Picture. . onProgressUpdate, is somwhat of a process that gets executed like 10 or 20 times a second, automatically, I think, that without even being called. . This method, was part of this original app I had. . So, now, as I cannot control how much times a second that method is executed, I wanted to replace it with other method that uses a Timer to actually allow me to control the precisse time by what is executed every time. . So I created the method "Actualizar", with a Timer inside it. . But the problem is that runOnUiThread gets in red and says Cannot Resolve Method. When in other Apps I used it, this did not happen, and worked great. . So, the th...

I am looking for a logo re-brand to give me strong brand representation going forward. I need something I can use in all formats (possibly something slick with movement for my website, but I'm prepared to listen to everything) giving me an instantly recognisable image. To be honest, I don't really have a logo today, just a particular font and colour scheme I work with. About my company: We are a furniture and home furnishings retailer based right next to the sea in the idyllic retirement resort of Sutton on Sea, Lincolnshire. Our customers is primarily retired, but we would also like to appeal to a more youthful market. Going forward, I have plans to turn my store into more of a department store than just a home furnishings retailer, so a...

Looking for an experienced copy writer who can write web content for a forex broker website. We prefer only writers who have experience in writing for this niche. Excellent english skills are required. Niche : Online Forex Trading Brokerage Writers with prior experience on above niche is preferred. Below are the references : 1. 2. https://...copy writer who can write web content for a forex broker website. We prefer only writers who have experience in writing for this niche. Excellent english skills are required. Niche : Online Forex Trading Brokerage Writers with prior experience on above niche is preferred. Below are the references : 1. 2. 3. 4.

Good day all - I have a C# console application that connects via to a Unix server and downloads the files from the Unix Server. The issue I face is that when the directory on the Unix Server contains a folder, my code errors out. What I want... I need the below code to be updated to download 1) All files in the parent directory (already does this) 2) All folders and sub-folders (including any files) -- I NEED THIS Below is my current syntax: private static void DownloadFile(string arc, string username, string password) { string fullpath; string fp; var options = new ProgressBarOptions { ProgressCharacter = '.', ProgressBarOnBottom = true }; using (var sftp = new SftpClient(Host, username, password)) { (); fp = ...

Hello Freelancers! I have this project. The initial Description is int the ATTACHED DOC (). The project is almost complete () i just want some changes. I will explain everything better in chat. The has complete project that needs changes: Changes: 1. Use another dataset i provide at description () 2. Change as much as possible the code (variables, structure, format of commands, etc) and add add analytical comments everywhere in the code 3. Write the report 4. In step 3 use at least 1 different Neural Network model from the ones used in ready code. Kindly review and let me know if interested. Deadline for this is 15 hours and budget is aprox $15-$40 AUD. Thank you for your time and let me know if interested. Happy Biding

Hello Freelancers! I have this project. The initial Description is int the ATTACHED DOC (). The project is almost complete (task 1 in the text and task 2 in the pdf in the ATTACHED ZIP) i just want some changes. I will explain everythin better in chat. The zip has the complete project that needs changes. You can do 1st or 2nd only if you want: TASK 1 is in R: 1. In TASK1 use another dataset i provide at description 2. In TASK1 change as much as possible the code (variables, structure, format of commands, etc) and add add analytical comments everywhere in the code 3. in TASK1 write the report 4. In TASK1 step 3 use at least 1 different Neural Network model from the ones used in ready code. Task 2 is in Python 5. In TASK2 (which corresponds to in the zi...

...500, «message»: «Something went wrong. Please try again later.» }   Get next contact profiles Request Method URL POST /v1/contacts/preload Params Parameter Type URL id String Id of current user count Int Number of user profiles to preload location Object User location in format {“lat”: …, “lng”: …} Response 200 { «status»: 200, «message»: «Ok», «contacts»: {[ {“id”: Int, “name”: String, “photo”: String, “video”: String}, {“id”: Int, “name”: String, “photo”: String, “video”: String}, …, ...

...….. please call this component ‘Manage Events’ in the admin menu i need event date on the table here : on x_site we need a new dropdown / select with 3 options Event type : European Days (1) Euroschool (2) Other (3) ALTER TABLE `eu_site` CHANGE `type` `type` INT(1) NOT NULL DEFAULT '0'; also a filter on the listing page : also please add a description field on here : /* 09:59:11 local eucmacnew */ ALTER TABLE `eu_site` ADD `description` LONGTEXT NOT NULL AFTER `summary`; administrator/ under event photo ================================== task 2 i simply need a few frontend views created on the com_research component

Hello, I need to reverse some C# code, the code computes a hash, i need to generate hashes that pass this hashing test. public static string ComputeHash(string serial) { string str = ""; byte[] buffer = new byte[32]; byte[] numArray1 = new byte[16]; byte[] numArray2 = new byte[16] { (byte) 59, (byte) 67, (byte) 235, (byte) 54, (byte) 183, (byte) 124, (byte) 22, (byte) 65, (byte) 172, (byte) 154, (byte) 31, (byte) 14, (byte) 188, (byte) 91, (byte) 48, (byte) 41 }; long num = (serial, ); byte[] numArray3 = (byte[]) null; if ( == 16) { byte[] bytes

I am looking for someone to create a website that works as a information search tool. All information is gathered and I require someone to design the site and place the information int he right areas.

would like to write a script for establishing an escrow system but I have no idea for how should be structure of database table. In this system, users can send money to "escrow system" through a kind of payment gateways (a payment gateway API is already available). There are 3 parties in transactions, a buyer, a seller and an escrow account. And system should work as folowings: - Buyer send payment to escrow account. And when payment confirmed by escrow mods/admins emails should be sent to buyer and seller - Seller send the item to buyer. When he/she sends the item, emails should be sent to buyer and escrow account. - If buyer gives confirmation when he/she receives the item without any problem, money from the escrow account should be transferred to seller. If buyer does n...

would like to write a script for establishing an escrow system but I have no idea for how should be structure of database table. In this system, users can send money to "escrow system" through a kind of payment gateways (a payment gateway API is already available). There are 3 parties in transactions, a buyer, a seller and an escrow account. And system should work as folowings: - Buyer send payment to escrow account. And when payment confirmed by escrow mods/admins emails should be sent to buyer and seller - Seller send the item to buyer. When he/she sends the item, emails should be sent to buyer and escrow account. - If buyer gives confirmation when he/she receives the item without any problem, money from the escrow account should be transferred to seller. If buyer does n...

Python 3.6.1 (default, Dec 2015, 13:05:11) [GCC 4.8.2] on linux calc_volume(5,6,7) Enter the length: 5 En...width: 6 Enter the heigth: 7 Traceback (most recent call last): File "python", line 1, in <module> File "python", line 5, in calc_volume TypeError: can't multiply sequence by non-int of type 'str' This is what I get on the console when I run the code below: def calc_volume(length=float, width=float, height=float): length = input("Enter the length: ") width = input("Enter the width: ") height = input("Enter the heigth: ") calc_volume = (str(length) * str(width) * str(height)) print("The volume of the rectangular prism is " + cal...

...closedException) { ("Connection to AMQP service is lost."); } catch (ConnectException connectException) { ("Connection to AMQP service is lost."); } ... 6. Unneeded computation in loops. There may be unneeded computation in loops, where you call a method inside a loop, but the return value is never used. For example: ... for (int i = 0; i < 1000; i++){ Result r = computeResult(i); // unneeded computation doSomething(i); } ... 7. Unused methods. Detect both private and public methods that are not referenced/called anywhere in the code. 8. Empty exception. There is no debug message when an exception occurs, which may cause debugging difficulties. 9. Unfinished exception handling code. There is a comment such as TODO or F...

Hi, looking for someone to build a website and all the backend (Databases and whatever else is needed) to interact with client Java programs. Need to be able to individually see each client, and store data for each client. (EG: A saved int on the client) and be able to send commands to the client (So the client would receive a message from the server and be able to react accordingly). Obviously alongside the website, I would also need a java class for receiving commands.

I have a basket trading EA and I want some changes done. The work will start with the addition of 1 subroutine but the coding work will be ongoing with other changes. I will pay for each job separately. First I want to allow closure of trades by currency pair. So for example if we have many trades open some EURUSD, some AUDUSD, some USDJPY and some GBPUSD and if any pair reaches a predetermined profit then that pair can close all of its trades. HERE IS AN EXAMPLE OF THE INPUTS input bool SymbolTradesBelongToBasket=true; input int SymbolMinTradesOpenForBasket=5; input double SymbolBasketCashTakeProfit=10; input double SymbolBasketCashPercentageTarget=0; I AM ATTACHING ONE EA WHICH HAS THIS FUNCTION

I need a Drupal 7 Token (module) that would output me current date plus n days. In php, I could get the date using `<?php $date = strtotime("+7 day"); echo date('d. M. Y', $date); ?>` (for 7 days offset), but I can’t make it work in Drupal 7.59. I must be available in Available tokens dialogue, where there would a custom token group `date_plus_days`. The module itself would be named `date_plus_days` or `Date Plus Days`. I don’t care what the description would be (make it clear with example output). Let me type `[date_plus_days:date_plus_days:#]` (where `#` is the offset int) as token. Ideally, it would be nice to have an option to define the date format from there, i.e. `[date_plus_days:date_plus_days:DATEFO...

I need code for a ms sql function that will parse a comma separated string of names to the first 10 values if the number of items is above 50 and then check to see if a certain name is included in that string. If it is included then just add an ... et al to the end but if it is not in the string then remove the last value and add the new item and then ... et al. So both string will have a total of 10 names. I have the code that counts the number of items in the string: so if the string is: Declare @authorCount int SELECT @authorCount = len(@Authors) - len(replace(@Authors, ',', '')) so then you would need to pull the first ten name Name List: = O'Shaughnessy JA, Kelloff GJ, Gordon GB, Dannenberg AJ, Hong WK, Fabian CJ, Sigman CC, Bertagnol...

I am in need of about two articles per week for our PPE (disposable protective clothing) blog. I would like the articles to be around 1,000 words. Topics are provided. You can visit our site (and blog) at Please provide relevant experience with your application

...be formatted similarly to the Player class files. The classes need to have the following, and you must decide the return types, visibility and any additional modifiers for these methods: defense class fields: int tackles; defense class methods: Defense(string name); setMinutesPlayed(int minutes); setTackles(int tackles); printStats() const; offense class fields: int yards; offense class methods: Offense(string name); setMinutesPlayed(int minutes); setYards(int yards); printStats() const; Questions: On lines 29 to 33 of , why is there an ‘&’ before the player variables? For lines 45 to 49 of , why not use a...

help me to write a C++ class (or a set of classes) that implements a stack using a double linked list. The type of data contained in the stack should be int. The maximum size of the stack is 50. Implement the following methods: Constructor and destructor; void push (int value); // pushes an element with the value into the stack. int pop (); // pops an element from the stack and returns its value. int isEmpty();// returns 1 if the stack is empty, 0 otherwise. int numOfElements();// returns the number of elements in the stack. void printElements(); // print out the current stack to the console. A main function; // execute each method of stack (except the destructor) at least once without asking input from the users.

Future Services Int is a Belgian company specialized in inspections and works on hard to reach locations. Beside classic inspection and work methods we make use of rope access and drones. We are looking for a vector which we can use on our website and for an exhibition we are attending. The vector should therefor be build as follow: - Total vector size of 235cm height and 685cm long which can be split in length of 235cm + 450cm (based on length of walls of our exhibition stand) - All information (as described below) should be included on both parts of the vector and should be possible to us as 2 banners beside each other - Idea: Picture of grey/white skyline (including high buildings, industry, bridge, silos, wind turbines etc) on which all our (possible) activities are drawn and h...

I am embarking on a new software invention. To kickstart it, I need your java code to have functions that I can integrate with my own code. Essentially you'd make me a program that takes input from a microphone and outputs the frequency, octave and note. I'd like to store time stamps of each distinctive note also. What this looks like practically: User hums a tune into the microphone - Doe ray me ------------- far so then the program detects c3 (start 0.5 seconds end 1.03 seconds) , d3 (start 2.3 seconds end 3.35 seconAds) e3 (start 5.12 seconds end 6.08 seconds) f3 (start 9.22 seconds end 10.41 seconds) g3 (start 13.17 seconds end 14.47 seconds) that data could then be stored in such a way that I could retrieve it and use it in my own java clas...

I am looking for an experienced Qt/C++ programmer to create a simple program which will read from and write to a csv (comma-separated-variable) file. I will be able to supply some sample files for testing. The GUI will consist of 3 global fields and a table. The global values will be a pathname (string), scale factor (int) and a layout (string). The table will consist of 7 columns and a variable number of rows. I need this to be infinitely expandable in length. Column 1: index (to be automatically generated and updated) Column 2: toggle on/off Column 3: toggle on/off Column 4: toggle on/off Column 5: User input: single lower-case letter, numeric, function key (F1-F12) OR "spacebar" Column 6: Read-only text, not editable by the user Column 7: User ...

would like to do personal branding and make a logo of my name. offical name and pet name letters should be evident int he logo design and should look like an R. Franics Roy (FR) and Rajesh Roy(RR). An element of love symbol should be in the logo. Logo should be in follwing color combinations. White and black, Gold and black , white and gold or black, white and gold . attached is a sample image

...to) the following classes: Number – abstract base class of all the number format classes Integer – wrapper for the primitive integer RomanNumeral – class for roman numeral - All the number format classes must be instantiated with an (optional) initial value. - For Integer instances, initial value is of type int and defaults to 0; - RomanNumeral – initial value is empty string (“”) - All these classes must have the following methods and must overload the following operators: int toInteger() const; std::string toRomanNumeral() const; virtual bool parse() = 0; validation of values Operators: +, -, *, /, %, >, <, >=, <=, ==, != - Notice the abstract method parse(). Take note that it should be called on the constructor o...

Hi. I have an Android Studio Project, which you can find Attached to this Project, which has a couple of Classes. When you run the App, there are just Two Buttons and a Toast. That Toast gets refreshed kind of like 10 Times a Second (its a String taken from a 'Refreshing' Int called "fr"). I need the following to be done with this Little App. To send the Refreshing Int "fr" to some Activity with the only layout there is setted as the ContentView, and say: If "fr" is less than 120, then set in a Refreshing TextView the Word "One", and if "fr" gets refreshed exceeding the 120, then that the TextView would set the Word "Two", visible to the User. That's all. If you need to make the TextView ...

Hi. I have an Android Studio Project, which you can find Attached to this Project, which has a couple of Classes. When you run the App, there are just Two Buttons and a Toast. That Toast gets refreshed kind of like 10 Times a Second (its a String taken from a 'Refreshing' Int called "fr"). I need the following to be done with this Little App. To send the Refreshing Int "fr" to some Activity with the only layout there is setted as the ContentView, and say: If "fr" is less than 120, then set in a Refreshing TextView the Word "One", and if "fr" gets refreshed exceeding the 120, then that the TextView would set the Word "Two", visible to the User. That's all. If you need to make the TextView ...

Hi. I have an Android Studio Project, which you can find Attached to this Project, which has a couple of Classes. When you run the App, there are just Two Buttons and a Toast. That Toast gets refreshed kind of like 10 Times a Second (its a String taken from a 'Refreshing' Int called "fr"). I need the following to be done with this Little App. To send the Refreshing Int "fr" to some Activity with the only layout there is setted as the ContentView, and say: If "fr" is less than 120, then set in a Refreshing TextView the Word "One", and if "fr" gets refreshed exceeding the 120, then that the TextView would set the Word "Two", visible to the User. That's all. If you need to make the TextView ...