Filtre

Son aramalarım
Şuna göre filtrele:
Bütçe
ile
ile
ile
Tür
Beceri
Diller
    İş Durumu
    434 threadx bootloader iş bulundu, ücretlendirmeleri EUR

    I have a redmi note 4 mobile phone running android. I wish to install lineage OS. I have been advised I need the bootloader and TWRP. Please reply to me in a message to confirm you have read the above and confirm. 1 if this is possible and 2. how long and 3. how much it will be 4. What information you require from me. https://www.getdroidtips.c

    €18 (Avg Bid)
    €18 Ortalama Teklif
    5 teklifler

    We want a bootloader that uses Asynchronous encryption to load a Private Key signed DFU over USB. So the sequence will be as follows. A binary file on a PC is encrypted using a Private Key to create a DFU The DFU will be loaded on the MCU and decrypted using Public Key. (Probably using the STM example DFU tool) The Bootloader is re-flashed with the

    €2797 (Avg Bid)
    €2797 Ortalama Teklif
    16 teklifler

    ...such as PaX, role-based access management, grsecurity (if any are freely available), enforce strict application sandboxing and other 2. hardenen chroot and secure grub and bootloader 3. enable full-disk encryption with LUKS or other tools 4. enforce clear non-executable zones or partitions on the file system 5. harden firewall to absolute minimum for

    €345 (Avg Bid)
    €345 Ortalama Teklif
    31 teklifler

    ฉันต้องการแก้ไขเว็บไซต์ 16 digis bootloader unlock

    €3375 (Avg Bid)
    €3375 Ortalama Teklif
    28 teklifler

    ...[login to view URL] HT68FB560 bootloader can be burned using the e-Writer Pro as seen here: [login to view URL] e-Writer software can be found here: [login to view URL] Firmware can be uploaded to chip through USB connection after bootloader is burned. With this information you should be able

    €2182 (Avg Bid)
    Özellikli
    €2182 Ortalama Teklif
    9 teklifler

    This is a custom-build PCB board that is Arduino-compatible and has SAMD21G18 MCU w...PCB board that is Arduino-compatible and has SAMD21G18 MCU with another wireless IoT chip. Requirements are to make the Arduino IDE work with the board, modify the Arduino bootloader, and build other drivers for the SAMD21G18 MCU to program the wireless IoT chipset.

    €656 (Avg Bid)
    Gizlilik Anlaşması
    €656 Ortalama Teklif
    23 teklifler

    ...project is to write a specialized serial bootloader for a Microchip 24JF1024GB606 microcontroller running in dual partition mode. The bootloader will work in the main loop, receiving data in chunks ranging in size from 15 to 150 bytes, writing them into the inactive memory partition. It is important that the bootloader be driven solely from within the main

    €1566 (Avg Bid)
    Gizlilik Anlaşması
    €1566 Ortalama Teklif
    16 teklifler
    Linux Expert Bitti left

    To update GRUB bootloader to change /boot ( from mount to directory) As the boot content was copied over from SAN boot. Already have booted from 64bit live boot disk. updated fstab.

    €237 (Avg Bid)
    €237 Ortalama Teklif
    6 teklifler

    I need to program a Pcb that’s uses a Atmega1280v TQFP that needs a Bootloader and program the source code , and test.

    €327 (Avg Bid)
    €327 Ortalama Teklif
    13 teklifler
    Pixel 2 Help Bitti left

    I bricked my pixel 2 trying to unroot it. The bootloader is unlocked, I cannot get it to work. All I want now I to have a normal pixel 2. So you have to use TeamViewer so you can see and fix it

    €55 (Avg Bid)
    €55 Ortalama Teklif
    1 teklifler

    i want to flash a processor , on a project for my sons go cart, I am looking for some one to created code to flash tricore infineon tc1762, tc1766/67 pflash and dflash , take existing file from windows pc and load into memory via canbus , infineon tc1762, tc1766/67 pflash and dflash loaderI , write software to load firmware, via can bus or any other port

    €385 (Avg Bid)
    €385 Ortalama Teklif
    5 teklifler

    I need bootloader for PIC18F46K22 that can be compiled with XC8 compiler using UART port and XTAL=20MHz.

    €65 (Avg Bid)
    €65 Ortalama Teklif
    5 teklifler

    I want to create simple NASM code that will copy 9th sector to 1th, my code execute second sector, there i want to put SectorCopy co...will copy 9th sector to 1th, my code execute second sector, there i want to put SectorCopy code. In another words i want to copy all data from 9th sector on 1th, i want too bootloader source code. I can pay only 1-3$.

    €9 - €9
    €9 - €9
    0 teklifler

    Atmega 328 p - pu bootloader and programer using usbasp Arduino ide + avrdudes

    €137 (Avg Bid)
    €137 Ortalama Teklif
    1 teklifler

    1: SATR 2.4C modified to work with dsPIC33EP512GP506 pins. 2: SATR 2.4C code mod...dsPIC33EP512GP506 pins. 2: SATR 2.4C code modified to work with Class 10 SD cards 3. SATR 2.4C code modified to support bootloader so SATR 3 could be loaded later 4: SATR 1.6A modified to work with dsPIC33EP512GP506 pins/class 10 SD/Bootloader. Each Milestone is AUD500.

    €1293 (Avg Bid)
    €1293 Ortalama Teklif
    1 teklifler

    moto g4 encrypted device lineageos 1.4 twrp 3.2.1. When startup in recovery mode i can add files with adb command even when bootloader is locked and dev mode is off and usb debug disabled. i need a fix to prevent startup in recoverymode or disable adb command...

    €115 (Avg Bid)
    €115 Ortalama Teklif
    9 teklifler

    Hello! We are having a requirement to develop a BLE and CAN bootloader for our system that is built on a Microchip dsPIC33EP512GM710. We are looking for skilled firmware engineers who can develop the bootloader and it's programming interface for us on BLE and CAN both. Please look and the document and revert with your offers.

    €426 (Avg Bid)
    €426 Ortalama Teklif
    10 teklifler

    I need new bootloader for Arduino Mega. When Arduino start it needs to check SD card, if there exist any .hex file in folder "upgrade" for example: "upgrade/[login to view URL]", do upgrade Arduino FW. After successful upgrade delete this file and do reset. When folder "upgrade" is empty, simply start Arduino. This project include step by step tutorial for

    €113 (Avg Bid)
    €113 Ortalama Teklif
    9 teklifler

    I have lost original code and only have eprom he...that I need to burn to blank chips. I had someone in the past create some software that can do this on my pc and I have been using it for about 2 years however I used my bootloader on another pc and now it will no longer function. I need someone who can work out how to reconfigure my clon er on my pc.

    €353 (Avg Bid)
    €353 Ortalama Teklif
    7 teklifler

    ...Very important that the 2 simulateously applications can RX and TX through the same USB RF module. USD100. 3) RF Bootloader with SATR SATR 3.4B that works with a RF USB Module that can support both 19.2kps (normal) and 100k (Bootloader) communications USD50 when working on your laptop USD50 4) RF Module supplied to me with SATR 3.4 code and SATRAdmin

    €360 (Avg Bid)
    €360 Ortalama Teklif
    1 teklifler

    SATR 3.4 bootloader complete, bug fixes from email. SATRScore integration.

    €171 (Avg Bid)
    €171 Ortalama Teklif
    1 teklifler

    I need an encrypted bootloader for Nuvoton M453LC3AE ARM Cortex M4 microcontroller. System components: -Nuvoton M453LC3AE -12Mhz crystal -UART3, Pin 28 & Pin 27 Deliverables: -Bootloader C source code for Keil -PC encryption application for Windows Additional Details: There is an existing non-encrypted bootloader available here, [login to view URL]

    €2172 (Avg Bid)
    Gizlilik Anlaşması
    €2172 Ortalama Teklif
    4 teklifler

    We would like to update ESP [login to view URL] to have a functioning 'Update Firmware' button You'll see it has been started but is not functional. G6 Utility has a functional...provide more/all of the G6 utility project if needed for comprehension. It must take a .hex file and update the firmware. It asks the user to powercycle to tool for the bootloader.

    XML
    €14 / hr (Avg Bid)
    €14 / hr Ortalama Teklif
    1 teklifler

    After a incident on Herzner Datacenter, my vServer is not starts. Probably is the bootloader that has problem. I want from someone to fix the bootloader, without reinstall the OS since i have no recent backup.

    €141 (Avg Bid)
    €141 Ortalama Teklif
    12 teklifler

    We are looking for 1 or 2 programmers for an embedded application in C. This projec...includes the following components: ATMEL328P ESP12 SPI memory, SPI RTC I2C memory Radio modules Need to be very confident in C and have a clear vision of memory management and bootloader. Looking for people who are in China or quite close and available immediately.

    €20 / hr (Avg Bid)
    €20 / hr Ortalama Teklif
    39 teklifler

    El trabajo consiste en recuperar el punto de acceso interno de un Cisco 1941W que ha quedado inaccesible despues del comando Reset Bootloader. Work is recover lost embedded AP from Cisco 1941W after a Reset Bootloader command.

    €59 (Avg Bid)
    €59 Ortalama Teklif
    4 teklifler

    ...between cushions. hm10 bluetooth module or better (what do you recommend.) 15 x ws2812B neopixel leds in a string. Minipro atmega328 with 32k of flash for sketch 2 k being bootloader. 2 or 3 18650 batteries for powering for up to 4 or 5 hours. will need a sketch for each cushion or a sketch with the ability to change so i can do the task above i

    €196 (Avg Bid)
    €196 Ortalama Teklif
    7 teklifler

    Need custom bootloader for SAMD21G18 to load firmware updates from SD card and decrypt. Also need matching pc app to encrypt updates before distribution. Basically need to combine the SD SPI bootloader from this project: [login to view URL] combined with the security features from this project:

    €1446 (Avg Bid)
    €1446 Ortalama Teklif
    19 teklifler

    We are a small-scale chemical manu...program the units. We would therefore like to have a working and safe bootloader that can re-program the units from a windows 7 computer after a command for software restart has been given to the unit. Attached You will find the current program, in which some code for the bootloader would need to be included.

    €136 (Avg Bid)
    €136 Ortalama Teklif
    6 teklifler

    ...between cushions. hc05 bluetooth module or better (what do you recommend.) 15 x ws2812B neopixel leds in a string. Minipro atmega328 with 32k of flash for sketch 2 k being bootloader. 2 or 3 18650 batteries for powering for up to 4 or 5 hours. will need a sketch for each cushion or a sketch with the ability to change so i can do the task above i want

    €269 (Avg Bid)
    €269 Ortalama Teklif
    12 teklifler

    DONGLE MODIFICATION. Detailed instructions on how to modify the production USB ...MODIFICATION. Detailed instructions on how to modify the production USB CC1101 to work with the SATR3 system. (PS don't forget I need help to get the SATR 3.2 gaming guns go into bootloader mode, does not matter which buttons I push on boot, it does not seem to work)

    €155 (Avg Bid)
    €155 Ortalama Teklif
    1 teklifler

    using Cortex M3 uP to communicate via Quectel 3G device to send datalogging csv files (up to 30kB) via ftp to a server - also to include bootloader and firmware downloader to download new firmware revs as required/available. Looking for experienced embedded programmer with suitable TCP/IP skills to assist in firmware development

    €4925 (Avg Bid)
    €4925 Ortalama Teklif
    8 teklifler

    Hello. We need a code for "pic18f2550 usb cdc bootloader" for our project. (ccs c or proton basic can be used, will be given in the source code) It will also be the exe and usable source code created with one of the c #, vb.net, python or c ++ languages to decode the hex code to the bootloader.

    €144 (Avg Bid)
    €144 Ortalama Teklif
    7 teklifler

    We need someone to build a compact (please specify aprox size in proposal) bootloader firmware that will allow to program our current firmware using one of the serial ports of the microcontroller. This serial port is connected to a serial to USB converter that we currently use for Microcontroller is Atmega1284p @ 20MHz

    €307 (Avg Bid)
    €307 Ortalama Teklif
    11 teklifler

    There will be 2 binaries with source code. 1.- Win32 App maybe in C# or Delphi that send the bin to STM32. 2.- Bootloader that will receive the bin file and save the upgrade. Win32 will send a UDP broadcast using UDP Port 2000 All STM32 boards will answer with a Board name, version and IPAddress This is the find & discovery section. After

    €708 (Avg Bid)
    €708 Ortalama Teklif
    12 teklifler

    ...to get a bootloader up and running in FRDM-KV11Z device so that we could program it using Beaglebone(BBB). The communication between BBB and KV11Z is using a UART. My idea is to get the KV11Z device to change its application whenever BBB gets a updated version of code( from the cloud). There is an already developed version of bootloader for Kinetis

    €713 (Avg Bid)
    €713 Ortalama Teklif
    12 teklifler

    ...do it now? READ ATTACHED FILE. SIMPLE AND DETAILED. LOOKING TO HIRE NOW. Should be 10 mins for someone who knows what they are doing or 5 if they have done it before. No bootloader lock etc. COMPLETE INSTRUCTIONS AND FILES ARE INCLUDED YOU JUST NEED TO USE A SHARING PROGRAM TO EITHER REMOTE ACCESS OR GUIDE ME. I have other work, quite a bit so if you

    €4 / hr (Avg Bid)
    €4 / hr Ortalama Teklif
    8 teklifler

    The chip 45 boot3 is a very famous bootloader that is mainly used for ATMEL microcontrollers. All information about this tool you can find in the WEB: [login to view URL] Both the microcontroller source and the GUI is open source and the Sourcecode is available. Unfortunately the GUI is written

    €542 (Avg Bid)
    €542 Ortalama Teklif
    14 teklifler

    i am working on ARM v7 board. I did some changes on hardware due to that Board is not able to boot, there is a bug in bootloader

    €448 (Avg Bid)
    €448 Ortalama Teklif
    8 teklifler

    I'm looking for programers, who be able to write small bootloader in assembler language, moreover this loader should be less then 512 bytes. Loader must be designed for satteliter receiver based on STI7100 microprocessor (SH4 architecture) This program have to initialize RAM memory and load from uart intereface u-boot file (I have prepared uboot for

    €299 (Avg Bid)
    €299 Ortalama Teklif
    2 teklifler

    We have...need to have a bitbucket account so i can share the repo with you. Specs: Database MongoDB server-side PHP 5.2+ Template Engine Twig Requirements: Apache (current bootloader not compatible with lighttpd) PHP 5.2+ GD2 (php module - image manipulation) mod_rewrite (php module - url rewriting) MongoDB NodeJS (server-side daemons)

    €156 (Avg Bid)
    €156 Ortalama Teklif
    14 teklifler

    I'm looking for programers, who be able to write small bootloader in assembler language, moreover this loader should be less then 512 bytes. Loader must be designed for satteliter receiver based on STI7100 microprocessor (SH4 architecture) This program have to initialize RAM memory and load from uart intereface u-boot file (I have prepared uboot for

    €135 (Avg Bid)
    €135 Ortalama Teklif
    5 teklifler

    I'm looking for programers, who be able to write small bootloader in assembler language, moreover this loader should be less then 512 bytes. Loader must be designed for satteliter receiver based on STI7100 microprocessor (SH4 architecture) This program have to initialize RAM memory and load from uart intereface u-boot file (I have prepared uboot for

    €109 (Avg Bid)
    €109 Ortalama Teklif
    2 teklifler

    ...end nodes. Arduino then will be setting DH and DL adresses of the Zigbee and sending messages with sensor monitoring etc. I have successfully uploaded ZNP firmware with bootloader to the Zigbee through SmartRF Flash Programmer but I am not sure if that is the correct one for my purpose. I also have IAR Workbench downloaded for compiling my own firmware

    €163 (Avg Bid)
    €163 Ortalama Teklif
    6 teklifler

    ...boot loader to check the SD card for a new version of code and load into flash and start running. I have already created the main application and I have also created a bootloader file to read the SD card etc. from a tutorial I found online. However, I am missing something because I cannot get it to work. I need help troubleshooting the code and settings

    €203 (Avg Bid)
    €203 Ortalama Teklif
    8 teklifler

    I need an Android app. I would like it designed and built. I would like a setup file created that will bypass bootloader and OS security, format hard drive, and replace Android OS 4.2.2 for my tablet.

    €587 (Avg Bid)
    €587 Ortalama Teklif
    70 teklifler

    ...of the swings and clashes, which can be found here: [login to view URL] The basics of the firmware are already done (the drivers of all parts and a bootloader were implemented). A new firmware can be uploaded via a microSD card. The most important point will be the development and implementation of a motion detection algorithm

    €227 (Avg Bid)
    €227 Ortalama Teklif
    1 teklifler

    Final stage for bootloader program 1) Encryption 2) Licensing Key and 3) final payment for all parts, tools and shipping costs

    €489 - €489
    €489 - €489
    0 teklifler

    Stage 4 bootloader project. Successful transfer hex files from PC to SATR Board by USB RF Module.

    €339 - €339
    €339 - €339
    0 teklifler