Filtre

Son aramalarım
Şuna göre filtrele:
Bütçe
ile
ile
ile
Tür
Beceri
Diller
    İş Durumu
    214 yocto iş bulundu, ücretlendirmeleri EUR

    ...run a Webkiosk on a RaspberryPi. The Webkiosk should be a browser running in fullscreen displayed over HDMI. The browser accesses a webserver that runs locally on the Pi. The website is not in the scope of this task. The goal is to find a fitting technological software stack to display the website. These questions will have to be answered: - Which Operating System? RaspberryPi OS, Buildroot, Yocto etc. - What display method: Display Server yes/no, which one? Alternative? - What browser: Chromium, Firefox.. The software stack must meet following requirements: 1. Free & maintained 2. Good user experience 2.1 Low boot time (the less the better): 2.1.1: 10-20 sec.: Ok 2.1.2: 20-30 sec.: Tolerable 2.1.3: > 30 sec: Too much 2.2 Boot Logo / Animation 2.2....

    €187 (Avg Bid)
    €187 Ortalama Teklif
    15 teklifler

    I have a project built on top of the Yocto project with many recipes building an entire os this os uses grub in order to boot and its booting perfectly using and I tried to fuse the into in order to have one single file instead of having both and used ``` grub-mkimage -v -c ../ -p ${EFIDIR} -d ./grub-core/ -O ${GRUB_TARGET}-efi -o ./${GRUB_IMAGE_PREFIX}${GRUB_IMAGE} ${GRUB_MKIMAGE_MODULES}``` the merge is done with some problems and I'm not able to boot so I need help figuring what's happening to the file and why it's not getting parsed correctly inside of the binary. to boot successfully

    €193 (Avg Bid)
    €193 Ortalama Teklif
    7 teklifler

    I need help figuring out something regarding grub boot loader so on a linux system we have grub-efi binary that is stored in /boot/efi and inside of that binary we have an early configuration that is pointing to I want to figure o...something regarding grub boot loader so on a linux system we have grub-efi binary that is stored in /boot/efi and inside of that binary we have an early configuration that is pointing to I want to figure out a way to merge configuration file directly into grub-efi binay Thats my end to end goal having the binary merged to configuration file and being able to boot I'm using yocto for this and I'm willing to pay as much time and money as it takes Thanks

    €446 / hr (Avg Bid)
    €446 / hr Ortalama Teklif
    1 teklifler
    Yocto support Bitti left

    I need someone to help me with building boot2qt image for Raspberry pi and migrate qt versions and allow of compilation of plugins.

    €198 (Avg Bid)
    €198 Ortalama Teklif
    7 teklifler

    We have been trained the model for NLP document suggestion and ranking, image classification and video. We're going to deploy these models on local environment as hardware like Raspberry PI 3 or 4 and Yocto. We need help to deploy these models as mentioned on Hardware OS. Please little study Yocto platform before. Thanks

    €20 / hr (Avg Bid)
    €20 / hr Ortalama Teklif
    9 teklifler
    Raspberry Pi Bitti left

    Develop and customize a Yocto-based embedded Linux system for the Raspberry Pi 3 single-board computer. Develop Linux support for HC-SR04 sensor . Develop a module test application

    €26 (Avg Bid)
    €26 Ortalama Teklif
    3 teklifler

    I need some help with my Yocto Project Everything compiles perfect , but my Openssl version is 3.0.5 and i need to change it to version 1.1.1q The folder /poky/meta/recipes-connectivity/openss has 1.1.1q but it pulls 3.0.5 from somewhere . Should be a easy task for someone thats clued up with Yocto.

    €131 (Avg Bid)
    €131 Ortalama Teklif
    8 teklifler

    We have product and yocto bsp's, we need to build or develope this yocto project

    €391 (Avg Bid)
    €391 Ortalama Teklif
    2 teklifler

    We have product and yocto bsp, we need to compile and release the OS

    €337 (Avg Bid)
    €337 Ortalama Teklif
    3 teklifler

    In order to use the IMX477 camera with BalenaOS (based on Yocto), we need a developer to write the necessary kernel patch and builds us a custom BalenaOS. You can find the necessary information in this forum: Thank you! :)

    €172 (Avg Bid)
    €172 Ortalama Teklif
    9 teklifler

    We have a RK3328 device running Yocto with linux 4.4. It has ES8316 audio codec but it is not configured properly. We need someone to configure it and fix some minor bugs. ( HDMI resolution detection error, Wake on LAN etc. ). Feel free to contact me for more information.

    €7 / hr (Avg Bid)
    €7 / hr Ortalama Teklif
    2 teklifler

    ...appreciated. • Knowledge of tools like GNUMake, CMake, etc. • Yocto Project • Basic knowledge of Linux kernel, device drivers would be good plus. • Collaborating with the rest of the engineering team to design and deploy the code to test/production environment. • Debug, validate, review and test new and existing code. • Experience with Linux Environment (Kernal Level Knowledge). • In-depth knowledge of relational databases (e.g. MySQL, PostgreSQL) and NoSQL databases (e.g. MongoDB). Knowledge of distributed systems is a plus. • Experience using system monitoring tools, automated testing frameworks and implementing server-side security. • Version Control using GitLab. Benefits: • Deep-Tech Learning :– Operating System Buildin...

    €34 / hr (Avg Bid)
    €34 / hr Ortalama Teklif
    4 teklifler

    I am trying to get the coral devboard to boot with buildroot. There is a yocto build to use as reference.

    €301 (Avg Bid)
    €301 Ortalama Teklif
    8 teklifler

    I am trying to get the coral devboard to boot with buildroot. There is a yocto build to use as reference.

    €142 (Avg Bid)
    €142 Ortalama Teklif
    9 teklifler

    Based on yocto RDK B raspberry pi board coding language c environment linux

    €294 (Avg Bid)
    €294 Ortalama Teklif
    4 teklifler

    The project requires an Embedded Programmer having experience in Driver Programming for FPGA cards, PCIe Interface and YOCTO as well as upbringing the Linux OS. Please DO NOT APPLY, if you DO NOT HAVE THE REQUIRED EXPERIENCE.

    €351 (Avg Bid)
    €351 Ortalama Teklif
    7 teklifler

    IoT Project for Elevator Management System. Need a software developer a Python programmer to configure Single Board Computer (SBC). Configure the SBC as follows: 1. Configure the READ function to collect the Data on RS-485 port from a Daisy Chained I/O modules. Architecture diag. attached ( max. 8- I/O modules with 45 connection each, daisy chained and connected with SBC on RS-485 port) 2. Configure the Master - Slave and daisy chaining. 3. Configure the MODBUS registry. 4. Configure WRITE function to receive command from Cloud application and trigger the I/O board. 5. Push the data to third party cloud solution in JASON format. 6. Make sure the data is collected and pushed on the cloud software successfully. 7. Need assistance after deployment in case any ambiguity arises. 8. GUI for int...

    €88 (Avg Bid)
    €88 Ortalama Teklif
    4 teklifler

    ...to work with clients. Requirements/Qualifications: - 5 years of experience in embedded software development, C, C++ - 2+ years of experience with Embedded Linux - Working experience with the firmware layer - Fluency in English - Nice to have: yocto/linux Tasks: -Developing software for “State of the Art” IoT products for DAX listed German companies -Leading technical role, giving input to the software architecture -Product: smart home, new R&D for market release 2024 -Focus on the firmware layer, if wanted support towards the application layer -Yocto/Linux distribution Benefits: - Working on big projects in the German market you can get on your reference list - 100% remote work Start of first project: June/July 2022 Duration of projects: Between 6 to 12...

    €28 / hr (Avg Bid)
    €28 / hr Ortalama Teklif
    11 teklifler

    I want my own kernel and image for the Radxa Rock PI E Board compiled with the yocto framework. there is an existing support with instruction is on this site: there are some problems when compiling raxda used and old branch dunfell and there are compiling errors with 2 packages. you got access to my linux debian server, where the yocto enviroment is installed. goal: + ready image for my sd card + bitbake -k radxa-console-image + documentation what was the solution + hourly recording about your work skills: embedded software Yocto Buildroot Linux programming C/C++

    €15 / hr (Avg Bid)
    €15 / hr Ortalama Teklif
    6 teklifler

    I have Ubunto VM. I have installed Yocto dunfell image, ad built it correctly (command line full image). I have been able to boot my Raspberry Pi 400 successfully with it. Now I want to setup the SDK for the same. But not able to follow the detailed procedure well on Need somebody to do the job.

    €58 (Avg Bid)
    €58 Ortalama Teklif
    1 teklifler

    Development of embedded near real time solutions on a Linux platform in a Yocto Project environment. Ability to emulate touch screen functionality from conceptual scetches, and actuate resultant hardware command instructions to analog hardware through I2C, USB, LVDS Display and SPI communications protocols will be required. Familiarity with TCP-IP over Ethernet interfacing as well as DICOM and HIS/RIS application protocols is a major plus. Project is currently centered on NXP i.Mx8m_Mini evaluation board. Familiarity with the programming of this board is a plus. Please provide a portfolio of work at this level for consideration. Projects that are actually being marketed and can be downloaded / evaluated today are preferred.

    €602 (Avg Bid)
    €602 Ortalama Teklif
    16 teklifler

    I have Ubunto VM. I have installed Yocto dunfell image, ad built it correctly (command line full image). I have been able to boot my Raspberry Pi 400 successfully with it. Now I want to setup the SDK for the same. But not able to follow the detailed procedure well on Need somebody to do the job.

    €141 (Avg Bid)
    €141 Ortalama Teklif
    3 teklifler

    Searching for Linux kernel developer, Network programmer, network device driver expert, yocto Linux expert.

    €23 / hr (Avg Bid)
    €23 / hr Ortalama Teklif
    4 teklifler

    I am looking for an embedded linux expert who has experience about Yocto and STM32MP157. I have a MYD-YA-157C Development board of MyiR. I am looking for someone to guide me and want to make a partnership in some projects

    €480 (Avg Bid)
    €480 Ortalama Teklif
    6 teklifler

    Please do NOT bid if you do not have the following experience This project requires an Experienced Embedded Programmer. 1. Prior experience in writing Interrupt Service Routines in Linux is a must 2. Prior experience with YOCTO is a must 3. Prior experience with Xilinx xDMA is a must 4. Prior experience with PCIe Interface is needed. 5. Familiarity with RISC-V architecture is a plus.

    €417 (Avg Bid)
    €417 Ortalama Teklif
    5 teklifler

    I need to setup a development environment on my Ubuntu VM. I will build code for Raspberry Pi 400, with yocto embedded linux. Also, I will build the code locally so I'll need the SDK. And to enable remote debug I will use Netbeans or some other platform. Currently I am using Ubuntu VM and able to run and debug on Raspian OS. But now I want to shift to real embedded, where the application will be merged with the OS that will run as a real embedded system, using yocto. I am using all peripherals of Raspberry, and I am writing code in C.

    €147 (Avg Bid)
    €147 Ortalama Teklif
    2 teklifler

    Hi, Basically, this issue needs to be resolved: It all starts when I try to follow this tutorial: issue: Reading file would overwrite reserved memory. Failed to load '

    €9 - €28
    €9 - €28
    0 teklifler

    ...work with clients. Requirements/Qualifications: - 5 years of experience in embedded software development, C, C++ - 2+ years of experience with Embedded Linux - Working experience with the firmware layer - Fluency in English - Nice to have: yocto/linux Tasks: -Developing software for “State of the Art” IoT products for DAX listed German companies -Leading technical role, giving input to the software architecture -Product: smart home, new R&D for market release 2024 -Focus on the firmware layer, if wanted support towards the application layer -Yocto/Linux distribution Benefits: - Working on big projects in the German market you can get on your reference list - 100% remote work Start of first project: May 2022 Duration of projects: Between 6 to 12 mont...

    €28 / hr (Avg Bid)
    Özellikli
    €28 / hr Ortalama Teklif
    12 teklifler

    ...work with clients. Requirements/Qualifications: - 5 years of experience in embedded software development, C, C++ - 2+ years of experience with Embedded Linux - Working experience with the firmware layer - Fluency in English - Nice to have: yocto/linux Tasks: -Developing software for “State of the Art” IoT products for DAX listed German companies -Leading technical role, giving input to the software architecture -Product: smart home, new R&D for market release 2024 -Focus on the firmware layer, if wanted support towards the application layer -Yocto/Linux distribution Benefits: - Working on big projects in the German market you can get on your reference list - 100% remote work Start of first project: May 2022 Duration of projects: Between 6 to 12 month...

    €58 / hr (Avg Bid)
    Özellikli
    €58 / hr Ortalama Teklif
    17 teklifler

    ...documented. 5. XC7Z020-1CLG400C FPGA (or better, from the same series) from the Xilinx lineup is to be used. Verification will be carried out on the Digilent Zybo Z7 Board. Necessary drivers and bring-up to be provided as a set of Yocto packages B. Software/Firmware: 1. Host device for the interface detailed above shall be a BeagleBone Black device (), with the interface provided as a Cape, following the hardware interface specification for said capes 2. Device drivers and full Linux source image shall be provided as a fully integrated Yocto package - this will be bundled with the lower-level firmware and drivers referred to in hardware specification in (A) above 3. All source code shall be extensively documented and provision for both production and debug version

    €886 (Avg Bid)
    €886 Ortalama Teklif
    4 teklifler

    I'm looking for someone to make a raspberry pi 4 yocto recipe for the driver found at this github.

    €581 (Avg Bid)
    €581 Ortalama Teklif
    11 teklifler

    (Only on Full Time Basis : 8 Hours per Day)---->Microprocessor based Board Development and Firmware is done and now application layer need to be developed for MPU requirements. Development will be using C language and Operating System is Yocto Linux. I have not provided MPU chip name as we are OK to train the person if he/she is aware of C programming and Yocto development platform. Since Hardware is available at Pune and Ahmedabad only, we need you to work from either Pune or Ahmedabad location.

    €10 / hr (Avg Bid)
    €10 / hr Ortalama Teklif
    2 teklifler

    Hi, Basically, this issue needs to be resolved: It all starts when I try to follow this tutorial: issue: Reading file would overwrite reserved memory. Failed to load '

    €28 (Avg Bid)
    €28 Ortalama Teklif
    1 teklifler

    We have an ARM based module that will be connected to the Internet via the Ethernet interface(eth0) and we would like to control how WiFi clients(uap0) then access the Internet via eth0. We are restricted on what modules are available as the project has a precompiled Kernel and any changes requires a Kernal compile. Software is ARM based Toradex module iMX8 with Linux Yocto running these modules: -systemd -resolved -iw -connman -hostapd -dnsmasq -dhcpd not compiled into this kernel -iptables WiFi is configured as uap0 Ethernet is eth0 The requirement is to provide the configuration files (, , etc) and scripts necessary to provide the following: -Setup eth0 to be connected to router providing the DHCP and Internet access -Setup the WiFi (uap0) as an access point to

    €138 (Avg Bid)
    €138 Ortalama Teklif
    5 teklifler
    Yocto Update Bitti left

    From an existing Yocto version, we need to improve it by adding Bluetooth and CAN communications. The embedded plateform is a SMT32MP157F with a Cortex A7.

    €6332 (Avg Bid)
    €6332 Ortalama Teklif
    2 teklifler

    Hello! I seek for help in setup of Development Environment (Linux based) for SOMs made by Toradex (iMX6, Tegra T30) for Yocto Linux Embedded and for Torizon layer (over same Yocto). It is required to setup development environment and provide basic step by step on how to run/add/embed/rebuild etc tasks. Simple "Hello World" for OpenGL, GPIO, CAN and LVDS/RGB will be required. Detailed description of the project is provided in attached document. Thank you

    €206 (Avg Bid)
    €206 Ortalama Teklif
    5 teklifler

    Create a Yocto Receipe for Raspberry pi4 with the following Features : Embedded image that automatically launches the Bad Apple example from here : Totalcross Yocto metalayer: Enable support for the pican2 duo board: enable the following : WIFI LAN SSH client Touch screen support Disable the following : Bluetooth

    €115 (Avg Bid)
    €115 Ortalama Teklif
    5 teklifler

    I have some code that is tested and working on a raspberry pi/raspbian, and I am trying to build my own linux with yocto to run the code, but I can't get llvmlight and numba to cross compile. I have been able to compile it natively on a pi running my yocto build. If someone else want's to give it a try, that would be greatly appreciated.

    €95 (Avg Bid)
    €95 Ortalama Teklif
    3 teklifler

    I need go lang programs to run on my raspberry pi. For this I need go lang support to be built with in yocto. The go lang programs need to access an lmdb database. So I need this to be built in as well. At the end a test go lang program should be able to write to the lmdb database and read from the lmdb database.

    €236 (Avg Bid)
    €236 Ortalama Teklif
    1 teklifler

    ...thru QSPI flash only. Extra Info: 1. My costumed board is working properly and there is no any HW issue since I'm able to run on it a vxWorks 7 image. 2. I use petalinux 2019.2 version and Vitis 2019.2 3. I use the Xilinx tool: Platform Cable USB II for programming and debug. But please! I’d like to get bids just from a fellows who has a strong knowledge and experience with such a technology: Yocto project, Xilinx boards, petalinux 2019.2 and Platform Cable USB II. If you think you can help me and you are available for this mission in the next few days - I'd like to hear from you. Thanks!...

    €36 / hr (Avg Bid)
    €36 / hr Ortalama Teklif
    3 teklifler

    I need an enclosure that I can 3d print that Looks similar to a rifle scope. square or round. Is two pieces. When closed around the neck of the camera the camera does not move. The yocto board can be mounted to the top half of the enclosure inside of it. 2 holes in the back for the two USB C cables to stick out of. the bottom piece will slide on to a picatinny rail.

    €138 (Avg Bid)
    €138 Ortalama Teklif
    30 teklifler

    We currently have a custom Embedded Linux OS (Yocto) build running on a Toradex iMX6ULL SOM board. The OS was developed to run "bring up" test routines for GPIO and UART peripheral boards. The device tree supplied with the BSP supports a standard 7" display but now we require a dtb for a different 3.5" 320x240 VGA display. The project scope is to create a modified device tree to include a driver for the 3.5" parallel RGB display so that the display renders properly. Depending on the project outcome, there may be significantly more work available.

    €51 / hr (Avg Bid)
    €51 / hr Ortalama Teklif
    13 teklifler

    I am working on zynq 7020, the binaries are running manually. But I need binaries to be autoladed as part of booting.

    €18 (Avg Bid)
    €18 Ortalama Teklif
    2 teklifler

    I have working binaries, the application has to load on board automatically as a part of booting in Yocto. Budget is 1500 to 2500.

    €25 (Avg Bid)
    €25 Ortalama Teklif
    1 teklifler

    We are looking for an Embedded-Linux/DevOps expert to improve our deployment solution for the machine-control software of our 3D-Printers.   Tasks: • Devising a solution for customizing and building a Linux-based...The solution must also conform to open-source license requirements. • Devising an automated solution for deployment and protection of our proprietary software (initial installation and the consequent software updates). • Extending our DevOps Infrastructure as required for building this automated solution.    Requirements: • Experience in building embedded/customized Linux systems (for example the Yocto Project) • Familiarity with TPM and Secure Boot • Experience with build automation, gitlab pipelines and runners • Knowledge of Python an...

    €236 (Avg Bid)
    €236 Ortalama Teklif
    1 teklifler

    At Nanoscribe GmbH & Co. KG, we are looking for an embedded/customized Linux expert to improve our deployment solution for the machine-control software of our 3D-Printers. Tasks: * Devising a solution for customizing and bu...solution must also conform to open-source license requirements. * Devising an automated solution for deployment and protection of our proprietary software (initial installation and the consequent software updates). * Extending our DevOps Infrastructure as required for building this automated solution. Requirements: * Experience in building embedded/customized Linux systems (for example the Yocto Project) * Familiarity with TPM and Secure Boot * Experience with build automation, gitlab pipelines and runners * Knowledge of Python and PIP server is ...

    €71 / hr (Avg Bid)
    €71 / hr Ortalama Teklif
    8 teklifler

    Develop an IP PBX (Telephone Server) with Asterisk based on Yocto Linux that will run in a virtualized environment on a rugged box pc, e.g. duagon BC51M. The telephone server processes function calls based on rules that are defined within the scope of the numbering plan/concept. The system is expandable and compatible at the vehicle coupling with vehicles that support the corresponding numbering plan/concept. For the signaling between SIP clients (telephones) and the SIP server (telephone server) as well as between the SIP servers, the function number plan is taken into account. The function numbering plan is managed as part of the phone server configuration. The telephone server provides an Administrative Webportal that can be used for SW/Config Provisioning, configure/manage dialp...

    €36 / hr (Avg Bid)
    €36 / hr Ortalama Teklif
    7 teklifler

    I need to build embedded linux images for different development boards ranging from STM32 to Xilinx. Each image needs to have different modules configured in them (e.g ssh, ftp,, wifi, ethernet, etc.) Each board might have to be configured to boot from NAND...ranging from STM32 to Xilinx. Each image needs to have different modules configured in them (e.g ssh, ftp,, wifi, ethernet, etc.) Each board might have to be configured to boot from NAND/SD-card/TFTP depending upon the requirements. The UBOOT may need to be configured for various different features. The device tree might need to be customized as well. There could be the possibility of using either Yocto or Buildroot for a given board. There might be bash scripting involved as well in terms of automating the build for a particul...

    €15 / hr (Avg Bid)
    €15 / hr Ortalama Teklif
    8 teklifler
    Yocto Project Bitti left

    If you are good at flashing in Yocto projects, please bid

    €91 (Avg Bid)
    €91 Ortalama Teklif
    4 teklifler

    Our goal is to build a Yocto BSP for SnapDragon 410c board running on Linaro and to set up a Qt5 development environment.. We have developed a Qt5 app on a Ubuntu 20.04.2 LTS 64 bit host but we are still struggling with the Yocto recipes to transfer the app from the host to the Dragonboard 410c. This is part of a large development and once we can accomplish transferring and running this basic app we’ll be looking forward to hiring you to develop several modules on the system.

    €180 (Avg Bid)
    €180 Ortalama Teklif
    5 teklifler