Sonlu Eleman Analizi Jobs

I’m refining a cross-flow fan-wing UAV concept and need a complete picture of how it will behave in the air and how the structure will cope with the resulting loads. On the aerodynamic side, I want accurate lift and drag coefficients across the flight envelope, clear visualisation of flow patterns and vortex behaviour around the fan-augmented wing, and a detailed pressure distribution map that I can feed back into the structural model. CFD in ANSYS Fluent, OpenFOAM or an equivalent solver is fine as long as mesh independence is demonstrated and transitional flow around the fan is captured. For structural integrity, my main focus is the wing and fan structure plus the control surfaces and their attachments. I’d like an FEA model (Abaqus, ANSYS Mechanical, or similar) that impor...

Project Title Structural Analysis of a Building Using the Finite Element Method (FEM) Based on a 3D Model Developed in Revit Description Within the framework of an academic project, I aim to carry out a structural analysis of a building using the Finite Element Method (FEM) with the software Abaqus. I currently have a 3D model developed in Revit, derived from a three-dimensional survey, which serves as the geometric basis for the numerical simulations. The objective is to evaluate the structural behavior of the building in its initial state, as well as its response under seismic loading. Scope of Work The selected freelancer will be responsible for: Model Preparation for Abaqus Geometric simplification of the 3D Revit model Cleaning and adaptation of the model for FEM analysis Se...

I need a detailed fatigue analysis for FRP composites under cantilever loading conditions. The main goal is to predict fatigue life and generate S-N curves. Key Requirements: - Analyze fatigue behavior under cantilever loading - Predict fatigue life - Develop S-N curves Ideal Skills: - Expertise in fatigue analysis - Experience with FRP composites - Proficient in mechanical loading simulations Please include relevant experience in your bids.

I have lidar topography of a hillside and boundaries within which I would like to model in a 1.5m wide walking trail in ACAD Civil 3D. Outputs would be a isometric rendering, a chainage vs. elevation table and a description of cut and fill involved. Model would need to be sectioned at various points to allow for contractor to understand, and for retaining walls to be described. Please, as part of your offer, show me something you have undertaken in Civil 3D. A driveway, roadway, path, bridge....

Busco a un ingeniero estructural que desarrolle el cálculo completo para una tolva estática de acero. Necesito un análisis estrictamente estático que compruebe resistencia, estabilidad global y límites de deformación bajo las combinaciones de carga pertinentes (peso propio, material contenido, viento y posibles cargas de mantenimiento). Para agilizar la revisión, adjunta todo en un solo paquete que incluya: • Memoria de cálculo detallada con hipótesis, normas aplicadas y resultados numéricos. • Modelo editable en la herramienta que prefieras (SAP2000, STAAD, ANSYS o similar) junto con archivos de salida. • Planos de espesores, refuerzos, soldaduras y notas de fabricación listos para taller. • ...

I have a gas-liquid separator whose internal geometry needs to be verified before fabrication. The task is a complete CFD study of multiphase flow through the vessel, capturing the interaction between gas and liquid phases. My main concerns are flow distribution across the internals, overall pressure drop, and the resulting phase-separation efficiency, so the model must resolve these three metrics quantitatively. A CAD file of the current layout, design operating conditions, and fluid properties will be supplied at project start. The simulation should be run at the specified throughput, using an appropriate multiphase model (VOF, Euler-Euler, or similar) in Fluent, CFX, OpenFOAM, or another recognised solver, with mesh independence demonstrated. Please include transient behaviour if it ma...

My process-piping circuits in an oil & gas service are beginning to show uneven wall loss and experience recurrent leaks, and I need a focused CFD corrosion-erosion study that pinpoints where failure will most likely initiate. Scope • Build a 3-D CFD model of the specified piping runs and flow paths. • Use the material properties and flow-condition data I will supply to simulate erosive particle impingement, wall shear stress, and corrosion-erosion coupling. • Generate a risk map that highlights high-rate thinning zones and ranks them by remaining life and likelihood of rupture. Key objectives – Predict failure points with enough accuracy to guide inspection planning and spool replacement. – Quantify local wear rates (mm/yr) and correlate them...

I need a purpose-built wall-mount bracket arm that can telescope out between 30 cm and 60 cm while keeping a square VESA interface (75 mm and 100 mm patterns) on both ends. Aluminum is required for the entire structural portion so the finished piece stays light yet sturdy, and it must safely hold displays or light equipment up to 10 kg without noticeable sag or play. The task covers the full mechanical design and manufacturing preparation. A clean industrial look, concealed cable channel, and smooth, tool-free extension mechanism are highly preferred, but function and strength remain top priority. Please base the design on standard aluminum profiles or custom-machined parts—whichever gives the best mix of rigidity, weight, and cost. Deliverables • 3D CAD model (STEP or SolidWo...

Necesito una memoria de cálculo completa que demuestre el cumplimiento de la norma NE 1789 para dos ambulancias ya carrozadas: • Tipo I Toyota Hilux – solo cabina de atención médica • Tipo II Peugeot Boxer – cabina de atención médica y cabina de conducción El eje principal del estudio es la seguridad en colisiones. Parto de estructuras existentes; requiero que las analices, identifiques puntos críticos y plantees soluciones viables de refuerzo o rediseño. Entregables esperados (firmados por un ingeniero colegiado en el Perú): 1. Memoria de cálculo conforme a NE 1789 para ambas unidades 2. Informe de evaluación de impacto y resistencia, con simulaciones o verificaciones numéri...

I am looking for a precise ANSYS Fluent (or Mechanical if you prefer FSI) model that captures the overall pressure gradient of Daphne 7373 oil inside a piston-cylinder-type cell while accounting for temperature-dependent properties. My goal is to understand how the pressure field evolves throughout the stroke and how it redistributes once thermal effects are introduced. Scope of work • Build or refine the piston and cylinder geometry I will supply (simple STEP file). • Assign material properties for Daphne 7373, including its temperature-dependent density and viscosity. I can provide a data sheet; feel free to extend it with correlations you have used successfully before. • Apply a realistic loading sequence: piston movement, initial fill pressure, and the temperature...

I have a steady flow of mechanical components that must move quickly from concept to validated results, and I need talent based in Pakistan who can shoulder the full design-to-simulation cycle. Every assignment starts with my rough sketches or functional requirements; from there, you will build clean, fully-parametric 3D models in SolidWorks, prepare assemblies, and carry out high-fidelity finite-element analyses. Proficiency in SolidWorks and ANSYS is essential because these two platforms anchor my workflow. If you are also comfortable in Abaqus or COMSOL, you will have plenty of opportunity to apply them for non-linear or multiphysics cases. Typical tasks include choosing materials, refining geometries for manufacturability, meshing for convergence, setting realistic boundary conditions...

I need a detailed analysis using ANSYS Workbench. I have a Giga Press model that I want to analyze. There is a rod driving a whole clamping system, which moves a sliding vertical plate. A given force is acting on this rod. I want to obtain stress and deformation results, along with the motion. Requirements: - Expertise in ANSYS Workbench - Provide a detailed project proposal