Laser-Ready CAD Design of Steel Plate in DXF file

€30-250 EUR

Tamamlandı

İlan edilme: 3 ay önce

€30-250 EUR

Teslimde ödenir

Description: I need a CAD design of a 6.6" x 5.03" (167.4 mm x 127.83 mm) stainless steel plate. The design must be laser-ready and include all labels as part of the final product. Specifications: Total Plate Size: 167.4 mm x 127.83 mm (6.6" x 5.03") or as close as possible. Grid: 12 rows × 16 columns = 192 cells. Cell Size: 9.525 mm x 9.525 mm (square cells). Grid Layout: 12 rows, 16 columns. All grid lines are engraved, not cut. Labels: "Letter 1", "Letter 2", "Letter 3", "Letter 4" above the 4-column blocks (top margin) (Columns 1-4, 5-8, 9-12, 13-16). "1" to "12" next to the rows (side margin). All labels are part of the final product and must be within the final plate cut border. Font: Sans-serif (e.g., Arial, Helvetica), size = 10 pt (approx. 3.53 mm) or other legible font. Line Weights and Layers (Critical for Laser Software): All lines must be on the correct layer and have the correct line weight. Layer Name Line Weight Color Purpose Laser Software Action "CUT" 0.0000 mm Red (#FF0000) Outer border of the plate Cut - High power, low speed. "ENGRAVE" 0.1 mm Blue (#0000FF) All standard grid lines (horizontal and vertical) Engrave - Low power, high speed. "THICK_ENGRAVE" 0.3 mm Green (#00FF00) Vertical separators between 4-letter blocks (X = 25.4, 50.8, 76.2 mm) Engrave - Slightly higher power, lower speed than "ENGRAVE". "TEXT" 0.1 mm Black (#000000) All text labels ("Letter 1", "1", "2", etc.) Engrave - Low power, high speed. Margins: The labels are within the cut border. The grid is centered within the plate. Export: Export as DXF R14. Include all layers and line weights. Proven experience with CAD software particularly for laser engraving. Strong understanding of DXF file formats and laser cutting/engraving requirements. Attention to detail and precision. Ability to work independently and meet deadlines. Experience with laser cutting/engraving software is a strong plus. Please include the following in your proposal: Your experience with LibreCAD and laser cutting/engraving. Examples of similar projects you've completed. Your proposed timeline and rate (fixed price or hourly). How you would approach this specific job. Note: The final user will use this file with a laser cutter. The laser software will interpret the layers and line weights to assign cutting power/speed and engraving power/speed. We need the file to be correctly structured for this process. Please only apply if you are confident in your ability to deliver a professional, laser-ready file.

Proje No: 40036642

Proje hakkında

21 teklifler

Uzaktan proje

Son aktiviteden bu yana geçen zaman 3 ay önce

Biraz para mı kazanmak istiyorsunuz?

E-posta adresi

Freelancer'da teklif vermenin faydaları

Bütçenizi ve zaman çerçevenizi belirleyin

Çalışmanız için ödeme alın

Teklifinizin ana hatlarını belirleyin

Kaydolmak ve işlere teklif vermek ücretsizdir

Seçilen:

@ebrahemh3

Hello, I’m Ebrahem Hassan, a Mechatronics Engineer experienced in precision CAD modeling, CNC/laser-ready drawings, and manufacturing-oriented documentation. I frequently deliver DXF files with strict layer, line-weight, and export requirements for fabrication, so creating a clean, laser-ready grid plate is well within my workflow. I understand the objective: a stainless-steel plate with a perfectly centered 12×16 grid, engraved lines, clear labels, and a fully structured DXF R14 file that the laser software can interpret without any editing. With my background preparing fabrication drawings for robotics components, sheet-metal parts, and engraved plates, I’ll ensure millimeter-accurate geometry and correct layer organization. My approach is to build the plate using exact dimensions, apply the 9.525 mm cell pattern, and assign each feature to its proper layer: • CUT for the outer border • ENGRAVE for grid lines • THICK_ENGRAVE for the 4-column separators • TEXT for all labels Line weights, colors, and hierarchy will match the laser software’s expectations. The final DXF R14 export will be clean, lightweight, and ready for immediate production. You’ll receive: • Laser-ready DXF R14 with all layers & line weights • Centered 12×16 engraved grid • All labels in a readable sans-serif font • Proper margins and plate dimensions • Organized, fabrication-ready file structure I’d be glad to deliver a precise, professional file that your laser operator can use without adjustments.

€30 EUR 1 gün içinde

5,0

(2 değerlendirme)

2,9

21 freelancer bu proje için ortalama €94 EUR teklif veriyor

@MADAlphaDesigns

THIS IS NOT THE AUTO BID, PLEASE REVIEW IT IN DETAIL Hi Rob, I’m excited about the opportunity to create a laser-ready CAD design for your stainless steel plate. With proven experience in LibreCAD and considerable expertise in laser engraving processes, I can assure you that your specifications will be meticulously met. I’ve completed similar projects where precise labeling and correct line weights were crucial for laser operation, ensuring high-quality results. I will structure the design to include 192 square cells as specified, ensuring all labels are placed within the final cut border and the grid is centered perfectly. By adhering to the layer requirements detailed, each line will be optimized for laser performance, guaranteeing an efficient cutting and engraving process. I propose to complete this project within 5 days for a fixed price of €200. This timeframe allows me to ensure every detail is polished. Thanks,

€42 EUR 1 gün içinde

5,0

(21 değerlendirme)

6,1

@CreativeDesign50

Hi I have reviewed the details and am confident that you want (Laser-Ready CAD Design of Steel Plate in DXF file) I can deliver precise and high- quality 2D and 3D AutoCAD designs that meet your expectations. With several years of experience in AutoCAD design, I have honed my skills in creating detailed technical drawings and models. My portfolio showcases a variety of successful projects that align with your vision. Please take a moment to view my portfolio: Creative Design50 Portfolio:---https://www.freelancer.com/u/CreativeDesign50 I'm excited about the opportunity to collaborate with you. Let's discuss your project in more detail to ensure we achieve the best results. Looking forward to your response. Best regards, Kirandeep K.

€61 EUR 1 gün içinde

4,8

(69 değerlendirme)

6,2

@rvwebfreelancing

Hi there! I can produce a precise, laser-ready CAD plate with correct layers, line weights, grid geometry, and embedded labels exactly as required for DXF R14 export and laser-cut workflows. To structure the file correctly from the start, could you clarify: ✔ Do you prefer LibreCAD specifically, or is AutoCAD acceptable for generating the final DXF? ✔ Should the text be single-line (engrave-friendly) or standard TrueType converted to outlines? ✔ Do you want the grid perfectly centered, or aligned with specific margins? I look forward to your clarification and the opportunity to collaborate professionally. Best! Rahul Verma

€31 EUR 4 gün içinde

4,9

(39 değerlendirme)

6,2

@LandMark

Hello Sir, With expertise in CAD design and laser engraving, I propose to create a laser-ready 6.6" x 5.03" stainless steel plate design in DXF format. I have the necessary skills and experience to ensure precise grid layout, labeling, and correct layering for laser software interpretation. My approach will guarantee a high-quality result suitable for laser cutting. How would you like me to proceed with this project? What is your preferred timeline for the project completion?

€100 EUR 2 gün içinde

4,7

(14 değerlendirme)

5,6

@subodhkumarv2015

Hi, there I hope you’re doing well. I’m a Mechanical Engineer with strong experience in SolidWorks, LibreCAD and laser cutting/engraving, Fusion360, Inventor, product design, 3D modeling, simulations, and manufacturing drawings. I’ve completed many projects as following: • 3D modeling and mechanical design with functions • Detailed engineering drawings and GD&T • Product development from sketches or new concept idea • Design for manufacturing (DFM) • High qualitied Rendering I can deliver accurate results and fast revisions, and I always maintain clear communication and reliability. I’d be happy to discuss your project details and start immediately. Looking forward to working with you. Best regards

€50 EUR 1 gün içinde

5,0

(19 değerlendirme)

4,6

@FREEOF

Hello, I have checked your description and attached PDF and png. I will do 2D Laser cutting drawing in AutoCAD. I will provide you final output DXF file for laser cutting on metal.

€40 EUR 1 gün içinde

4,9

(48 değerlendirme)

4,5

@CaliforniaVibe

Hello, I can provide a precise CAD design for your stainless steel plate, laser-ready and fully compliant with your specifications. With extensive experience in LibreCAD and laser engraving, I've successfully completed similar projects, ensuring attention to detail in all layers and line weights. I propose a turnaround of 5 days for this project. Could you clarify if there are any specific file naming conventions you prefer for the DXF export? Thanks,

€34 EUR 3 gün içinde

4,9

(3 değerlendirme)

4,5

@andrewy32

Dear Client ❤️❤️❤️. Hire ME! I can deliver a laser-ready DXF R14 of your 167.4 × 127.83 mm stainless plate with the 12×16 engraved grid, text labels, and the exact layer/line-weight scheme you specified. I’ll center the grid, place the thicker vertical separators at X = 25.4 / 50.8 / 76.2 mm, and export with all layers intact. Deliverables: DXF R14 (layers + weights), STEP/STL preview, 2D dimension drawing, quick QC report. If that works I’ll start and deliver the DXF and a PDF check for your approval.

€140 EUR 7 gün içinde

0,0

(0 değerlendirme)

0,0

@symonh

Hello, expert is here! I enjoy clean, production-ready work for laser shops — no guesswork. I’ll lay out the grid so each 9.525 mm cell is exact, position the thicker separators over the 4-column block boundaries, and make sure all labels are engraved inside the cut border and exported as outlined text to avoid font issues. Your cutter will see only four layers with the correct colors/line widths and act accordingly. I’ll deliver DXF R14, STL, and a PDF drawing, plus a short verification checklist showing the file opened correctly in LibreCAD.

€140 EUR 7 gün içinde

0,0

(0 değerlendirme)

0,0

@sadiar86

Hey Rob M., I just finished reading the job description, and I see you are looking for someone experienced in 2D Drawing, CAD/CAM, 3D Design, Engineering Drawing, AutoCAD, Product Design, 3D CAD, 2D Drafting, Drafting and Solidworks. This is something I can do. Please review my profile to confirm that I have great experience working with these tech stacks. While I have a few questions: 1. Are all these requirements? If not, please share more detailed requirements. 2. Do you currently have anything done for the job, or does it have to be done from scratch? 3. What is the timeline to get this done? Why Choose Me? 1. I have done more than 250 major projects. 2. I have not received a single bad feedback in the last 5-6 years. 3. You will find 5-star feedback on the last 100+ major projects, which shows my clients are happy with my work. Timings: 9 am - 9 pm Eastern Time (I work as a full-time freelancer) Portfolio Link: https://www.freelancer.com/u/syeds273 I will share with you my recent work in the private chat due to privacy concerns! Please start the chat to discuss it further. Regards, Sadia.

€30 EUR 2 gün içinde

0,0

(0 değerlendirme)

0,0

@Hammadali914

Hello, I’m interested in creating your laser-ready CAD design for the stainless steel plate. I’m new to freelancing, but I have solid knowledge of LibreCAD, DXF formatting, and laser engraving requirements. Even without a long history on this platform, I work carefully, double-check measurements, and make sure the final file is clean, accurate, and ready for your laser machine. Here’s how I will handle your project: * Create the 167.4 mm × 127.83 mm plate outline on the **CUT** layer. * Build the 12×16 grid with exact 9.525 mm cells on the **ENGRAVE** layer. * Add the three thick vertical separators on the **THICK_ENGRAVE** layer. * Place all text labels (“Letter 1–4” and row numbers 1–12) on the **TEXT** layer using a clean sans-serif font. * Keep all labels inside the border and center the grid visually. * Export a clean **DXF R14** and include a preview PDF for verification. What you can expect from me: * Careful attention to detail. * Quick adjustments if needed. * Clear communication. * A fully laser-ready file with correct layers and line weights. I may be new here, but I’m dedicated, reliable, and confident I can complete this task exactly as required. I’d truly appreciate the opportunity to work on it. Thank you!

€70 EUR 3 gün içinde