
Closed
Posted
Paid on delivery
I have an architectural model for my Spatial Design course that needs to come to life fast. The file set—clean Rhino and STEP geometry—breaks down into well over ten separate parts, all of which must be printed in white on an FDM printer at fine resolution (around 0.12-0.16 mm layer height is ideal). Because I’ve never had anything 3-D printed before, I’m counting on you to review the geometry for printability, flag or fix any obvious issues, choose optimal orientations in Cura/PrusaSlicer (or your preferred slicer), and handle the print itself. The level of detail I’m after is moderate: crisp edges, accurate dimensions, no need for ultra-fine texturing. Turnaround is tight—I’d like the finished, support-removed parts on my desk within a week if possible. Deliverables • All >10 parts printed in white, cleaned of supports, and packaged safely • Dimensional accuracy within ±0.3 mm, surfaces free from major blemishes or warping • Tracking details once the shipment is on its way If you can hit the timeline and quality, I’m ready to send the files immediately and keep communication swift so you can get started right away.
Project ID: 40763212
17 proposals
Active 7 days ago
Location: Melbourne, Australia
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
17 freelancers are bidding on average $433 AUD for this job

With 6+ years in the industry, I've honed my skills on diverse projects encompassing 3D CAD, Design, Rendering, and more. This equipped me with a comprehensive architectural understanding and a keen eye for detailed 3D model productions; perfect for tackling your Spatial Design print project. My years of experience have also taught me the importance of client satisfaction and excellent communication; I'll ensure every step meets your expectations. When it comes to 3D printing, preparation is key. Not only will I create the precise FDM prints you need (as per your specifications), but I'll also ensure any potential printability issues are addressed from the onset. My fluency in Rhino and STEP geometry and familiarity with slicers like Cura/PrusaSlicer will be valuable in optimizing part orientations for the finest output. Such an intricate endeavor demands meticulousness, which is very much my forte. Your architectural model will be printed to precise measurements; accuracy within ±0.3 mm guaranteed. And because I believe timely delivery is non-negotiable, rest assured that I'll have the parts cleaned, warping-free, packaged safely, and on their way within a week- and you'll receive tracking details at every step. Trust me to breathe life into your architectural vision with impeccable precision and a commitment to timeliness - let's bring your project to life!
$250 AUD in 1 day
6.7
6.7

Hi, I would like to grab this opportunity, I am a detail oriented worker and I will work till you get 100% satisfied. I have many years of experience in 3D printing, asset creation, visualisation and 3d animation. You can see my profile: https://www.freelancer.com/u/BLADESTYLE Please come over chat and discuss your requirement in a detailed way. Thank You
$250 AUD in 7 days
5.9
5.9

Your need for fast, high-resolution white FDM prints for your Spatial Design course aligns perfectly with my experience optimizing complex geometries for FDM printing, similar to how I’ve prepared detailed prototypes for architectural visualization projects where print speed and accuracy were paramount. I will meticulously review your Rhino and STEP files, identifying and resolving any potential printability issues like overhangs or thin walls. Using Cura or PrusaSlicer, I'll determine optimal print orientations for each of the ten-plus parts to maximize detail and minimize support material, targeting a 0.12-0.16mm layer height for superior surface finish. Prints will be executed on a calibrated FDM printer using high-quality white filament. To ensure the best outcome, could you confirm the maximum build volume constraints for any single part? Additionally, are there any specific areas of the model requiring exceptional dimensional accuracy? I'm ready to discuss your project further and provide a precise quote.
$556 AUD in 21 days
5.1
5.1

Hello there, I read your project details, so I understand you need your Rhino and STEP architectural model reviewed for printability, optimized for FDM printing, and produced as more than ten separate white parts with clean surfaces and accurate dimensions, ideally delivered within one week. Could you please share all your requirements in detail, such as the complete 3D file set, dimensions of each part, required quantity, preferred material (PLA or PETG), any critical tolerances or assembly interfaces, delivery location, and your exact deadline, etc.? Please also let me know if any parts have delicate features or specific surface-finish requirements. So I can help review the geometry, identify and resolve obvious printability issues, determine suitable orientations and support strategies in Cura or PrusaSlicer, and prepare the parts for printing at your target 0.12–0.16 mm layer height. I’ll also need to confirm the total print volume, material requirements, shipping time, and production feasibility before committing to the one-week turnaround and dimensional accuracy of ±0.3 mm. I can provide a fixed-price quote once the files and delivery requirements have been reviewed. Thanks!
$320 AUD in 2 days
5.1
5.1

⚡ I HANDLE THIS TYPE OF WORK REALLY WELL. I have just completed a similar architectural model print using Rhino geometry. You need clean, accurate parts that come together perfectly for your Spatial Design course. I’ll review the geometry thoroughly and ensure optimal orientations in PrusaSlicer. I’ll also watch out for common printability issues that others might overlook. I will keep everything clear and simple, without burying you in technical nonsense. MESSAGE ME, WORST CASE YOU GET FREE ADVICE. Regards, Stefan.
$400 AUD in 14 days
4.8
4.8

Hi there, I understand the urgency of your project and the importance of bringing your architectural model to life quickly. With my expertise in 3D modeling and printing, I can ensure that your clean Rhino and STEP geometry files are optimized for printing on an FDM printer with the desired resolution. I will review the geometry for printability, address any issues, and choose the optimal orientations for printing. I will handle the entire printing process, ensuring that all parts are printed in white, cleaned of supports, and delivered to you within the specified timeframe. I will maintain clear communication throughout the process and provide tracking details once the shipment is on its way. Please share the files with me, and I will get started promptly. Best regards, GenZ Solutions
$250 AUD in 1 day
4.5
4.5

I’m a mechanical CAD and product design professional with 13+ years of experience in 3D modeling, geometry preparation, and manufacturing-focused design. I can help prepare your Rhino and STEP models for FDM printing, focusing on dimensional accuracy, clean edges, reliable support removal, and a consistent white finish. I’ll review all 10+ parts for non-manifold geometry, thin walls, unsupported features, and potential printing issues. I’ll recommend suitable orientations and configure Cura or PrusaSlicer for approximately 0.12–0.16 mm layer height, with appropriate supports, infill, and dimensional settings. Any geometry changes will be discussed before modifying your original models. I’ll also establish a print-quality checklist covering warping, surface defects, dimensional tolerances, and support cleanup, and help coordinate safe packaging and tracked shipping. Target turnaround: Within 7 days, subject to model complexity, total print volume, printer availability, and shipping destination. I’ll confirm feasibility after reviewing the files. Before committing to the physical printing and delivery, I’d need to confirm the required white filament, maximum dimensions of the parts, total estimated print time, and delivery location. I’ll be transparent about any constraints rather than promise a deadline before checking the geometry.
$250 AUD in 1 day
3.8
3.8

Hi there, We have recently completed a similar project and would love to share some references. Your architectural model sounds right up our alley and we would love to exceed your expectations. Understanding your need for clean and white FDM prints with crisp edges, we will thoroughly review the geometry to ensure printability and choose the best orientations in our slicer of choice. Our goal is to deliver polished parts with dimensional accuracy within ±0.3 mm, arriving within your tight one-week timeline. While we might be new to Freelancer, we have over 9 years of experience off-site and I truly appreciate you taking your time to review our proposal. I would love to discuss this project more. Kind regards, Trichelle
$550 AUD in 7 days
3.3
3.3

Hello, I hope you are doing well. I am a PEC-registered Mechanical Engineer with hands-on experience in mechanical design, product development, and manufacturing. I specialize in SolidWorks CAD modeling, assembly design, mechanism development, technical drawings, and BOMs. My experience includes designing and improving products and industrial components, with a practical understanding of DFM and manufacturing processes such as CNC machining, sheet metal fabrication, 3D printing, injection molding, and casting. I also have working knowledge of AutoCAD, Fusion 360, and ANSYS for engineering analysis. Whether you need to develop a new product, improve an existing design, or prepare manufacturing-ready files, I can help turn your requirements into a practical engineering solution. Please share your project details, and we can discuss how I can help. Best regards, Muhammad Hammad Tariq
$250 AUD in 10 days
3.4
3.4

Hi there! I'm thrilled to bid on your "Urgent White FDM Model Prints" project. With expertise in CAD/CAM, 3D Modelling, 3D Rendering & 3D Printing , I'm confident in delivering high-quality results that enhance your work experience. I've completed numerous projects with similar requirements, earning 5-star ratings from satisfied clients. I'm proficient in working with various file formats, including CAD Formats, JPEG, PNG, and PDF. Before we begin, I'd love to discuss a few key points to ensure we align on the project's vision. ? You can check out my profile for samples of my work and client feedback: https://www.freelancer.com/u/AniWizard. Looking forward to collaborating and bringing your vision to life!
$250 AUD in 2 days
2.8
2.8

Hello, I am Ibtasam, a skilled freelancer with expertise in 3D printing and architectural modeling. I have experience working with complex Rhino and STEP geometry, ensuring optimal printability and high-quality results. I can efficiently handle the slicing, printing, and post-processing of over ten parts in white FDM material, meeting your specifications for resolution and dimensional accuracy. I understand the importance of timely delivery and precise execution for your Spatial Design project. With my attention to detail and commitment to quality, I am confident in delivering crisp, clean prints within your specified timeline. I am ready to collaborate closely with you, providing regular updates and ensuring a seamless communication process throughout the project. Let's discuss further details and get started on bringing your architectural model to life. Thank you for considering my proposal. Best regards, Ibtasam
$500 AUD in 7 days
1.4
1.4

Hello, I understand the urgency of your project for the architectural model in your Spatial Design course. I have experience in handling complex 3D prints, ensuring optimal print quality, and meeting dimensional accuracy requirements. I can review the geometry for printability, optimize orientations in Cura/PrusaSlicer, and deliver the finished, support-removed parts within your tight timeline. I will ensure crisp edges, accurate dimensions, and a clean finish on all parts. Your satisfaction with the final product is my priority. If you are ready to proceed, I am prepared to start immediately upon receiving the files and maintain clear communication throughout the process. Looking forward to the opportunity to bring your project to life. Best regards, Aqsa
$380 AUD in 4 days
0.0
0.0

I can help turn your requirements into a professional, reliable solution tailored to your needs. My focus is on delivering practical, user-friendly solutions with clean execution, strong functionality, and attention to detail. For your urgent white FDM model prints, I can help with reviewing the geometry for printability, ensuring optimal orientations in Cura or PrusaSlicer, and managing the print process to deliver accurate parts. I understand the importance of crisp edges and dimensional accuracy, and I will ensure that all parts meet your specifications without major blemishes or warping. I'd be happy to discuss your requirements, answer any questions, and outline the best approach for your project. Regards, jamesh920
$400 AUD in 7 days
0.0
0.0

Hi, I can help prepare your Rhino and STEP models for FDM printing, reviewing all parts for printability, checking geometry, and optimizing orientation and supports for clean results. I’ll aim for white filament, a 0.12–0.16 mm layer height, crisp edges, and dimensional accuracy while minimizing warping and surface defects. After printing, the parts will be support-cleaned, carefully packaged, and shipped with tracking details. I understand the one-week deadline and would first review the files, part dimensions, quantity, and delivery location to confirm print feasibility, shipping time, and cost before committing to the schedule. I’m ready to review your models and get started. Best regards, Jerald
$500 AUD in 5 days
0.0
0.0

Melbourne, Australia
Payment method verified
Member since Oct 12, 2026
₹1500-12500 INR
₹12500-37500 INR
$30-250 CAD
$30-250 USD
₹1500-12500 INR
€250-750 EUR
₹750-1250 INR / hour
₹1500-12500 INR
$10000-20000 USD
₹600-1500 INR
₹600-1500 INR
₹1500-12500 INR
$750-1500 USD
₹75000-150000 INR
£2-5 GBP / hour
€10 EUR
$250-750 AUD
₹600-1500 INR
₹1500-12500 INR
$10-300 USD