
In Progress
Posted
Paid on delivery
I need a dual-band microstrip patch antenna array built in both 1×8 and 1×16 configurations( objective no. 2 in the reference document uploaded). The arrays must cover two strictly defined bands—5.925 GHz-6.425 GHz and 6.725 GHz-7.025 GHz—with a tolerance no wider than ±1 MHz across the entire aperture. Target [login to view URL] gains are roughly 14 dB for the 1×8 and 17 dB for the 1×16, as observable in the 3D radiation plot. Provide base patch file also. Provide not just the file but also the results folder so that it is ready to be executed right away on Ansys HFSS 2025 R1 software. These are the basic requirements. Cooperation required if some modifications are requested.
Project ID: 40804494
13 proposals
Remote project
Active 1 day ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs

Hi, I’m an RF/antenna engineer with extensive HFSS experience in patch design, array feed networks and full-wave optimization. I’ll deliver a dual-band 1×8 and 1×16 microstrip array covering 5.925–6.425 GHz and 6.725–7.025 GHz, with ±1 MHz band-edge tolerance. The design uses a dual-resonant slotted patch element, a corporate feed with quarter-wave transformers, and parametric optimization to reach ~14 dBi (1×8) and ~17 dBi (1×16) broadside gain. You’ll receive: Base single-patch .aedt file 1×8 and 1×16 array .aedt projects Complete results folder (S11, 3D patterns, gain plots) so everything is ready to run in HFSS 2025 R1 Free modifications are included, and I’ll respond quickly to any change requests. Happy to share similar HFSS work on request. Let’s get started!
₹20,000 INR in 7 days
3.1
3.1
13 freelancers are bidding on average ₹25,512 INR for this job

My antenna design skills are directly aligned with your dual-band 1×8 and 1×16 microstrip array project, including the required 5.925–6.425 GHz and 6.725–7.025 GHz operating bands. I can focus on the electromagnetic design and optimization needed to meet the strict frequency tolerance and broadside gain targets of approximately 14 dB and 17 dB. My background in circuit design, electronics, design optimization, and antenna design supports accurate patch and array development. I can also provide the base patch file together with organized simulation results prepared for execution in Ansys HFSS 2025 R1, including the requested radiation and gain outputs. My project-management experience helps me maintain a complete, usable deliverable and support modifications where required. Choose me to develop your dual-band antenna arrays and deliver the associated HFSS-ready files and results folder.
₹25,000 INR in 3 days
7.8
7.8

Hi, how are you doing? I went through your project description and I can help you in your project. your project requirements perfectly match my expertise. We are a team of Electrical and Electronics engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas: Antenna Design (CST, HFSS) Embedded C Programming. VHDL/Verilog, Quartus/Vivado, LabVIEW/ Multisim/PSPICE/VLSI MATLAB/SIMULINK Network Simulator NS2/NS3 Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC, STM32 and ESP32. IDEs like Keil MDK V5, ATmel studio and MPLab XC8. PLCs / SCADA PCB Designing Proteus, Eagle, KiCAD and Altium IOT Technologies like Ethernet, GSM GPRS. HTTP Restful APIs connection for IOT Communications. Also, we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements.
₹37,500 INR in 7 days
5.9
5.9

Our specialization in antenna design, microwave engineering, and electromagnetic simulation using ANSYS HFSS directly matches your dual-band 1×8 and 1×16 array requirements. I can develop the microstrip patch array configurations for the specified 5.925–6.425 GHz and 6.725–7.025 GHz bands, with close attention to the narrow ±1 MHz tolerance and the requested broadside gain targets. My background in RF and microwave circuit design, radar systems engineering, and MATLAB-based modeling supports accurate array analysis and performance evaluation. I will provide the base patch file together with the HFSS 2025 R1 project and results folder, including the relevant simulation outputs and 3D radiation plots so the work is ready for execution and review. I am also prepared to support reasonable modifications during the project and would be glad to deliver a technically documented, simulation-ready antenna design tailored to your objective.
₹12,500 INR in 7 days
3.6
3.6

Your dual-band antenna array requires precise RF and electronics design, and my Circuit Design and Electronics background is directly aligned with developing the requested microstrip patch configurations. I can focus on the 1×8 and 1×16 array requirements, including the defined 5.925–6.425 GHz and 6.725–7.025 GHz operating bands, broadside gain targets, and tolerance constraints. My PhD in Artificial Intelligence, Bachelor’s degree in Computer Science, and nearly 20 years of professional experience provide a strong foundation in technical problem solving, simulation-oriented work, and producing structured engineering deliverables. I understand the importance of supplying the base patch file together with a complete results folder prepared for execution in Ansys HFSS 2025 R1, rather than delivering only an isolated design file. I am prepared to support the requested modifications and deliver the antenna design work in a clear, usable format. Choose me for a focused and technically organized approach to your dual-band array project.
₹12,500 INR in 7 days
2.2
2.2

Ansys-based antenna simulation is a strong match for my engineering background, particularly where accurate modelling, structural precision, and executable technical documentation are required. I can develop the dual-band microstrip patch array in both 1×8 and 1×16 configurations, with the specified frequency bands and broadside gain targets kept central to the design. My experience with Ansys and 3D modelling supports delivery of the base patch file together with organized simulation results suitable for execution in Ansys HFSS 2025 R1. I also provide clear technical documentation and can support requested design modifications, ensuring the project remains practical and reproducible rather than limited to a standalone model. I am ready to take responsibility for the complete antenna design package and deliver a professional, usable HFSS project.
₹30,000 INR in 7 days
2.2
2.2

Hey, You are looking for Dual-Band 1×8/1×16 Antenna Design " Lets Gets Started, I know you have several tempting proposals here, but I guarantee you to be impressed by my work. I have various skills in Prototyping, Signal Processing, Design Optimization, 3D Rendering, Circuit Design, Electronics, Antenna Design, Ansys, Project Management and Technical Documentation. If you give me this chance you will be impressed, because I guarantee that I will meet your expectations. I invite you to get a look at my portfolio You Can see it from here : https://www.freelancer.com/u/rahuldograarts If you have any questions or queries, do not hesitate to contact me. I hope to start working with you. With regards! Rahul
₹12,500 INR in 1 day
1.8
1.8

I recently designed a dual-band microstrip patch antenna that met strict frequency tolerances and gain requirements. I can help you achieve your targets for both the 1×8 and 1×16 configurations. For your project, ensuring that the antenna covers the specified bands with a tolerance of ±1 MHz is critical. I will also focus on maximizing the broadside gains of 14 dB and 17 dB, respectively. I'll provide not just the patch files but also a comprehensive results folder ready for Ansys HFSS 2025 R1. With over 6 years in antenna design and simulation, I'm new to Freelancer, so my pricing is flexible while I build my reviews. I'm confident in delivering high-quality results and ready to cooperate on any modifications you might need. Let's get those antennas performing! Do you have specific dimensions or materials in mind for the patches? Regards, Joshua.
₹28,150 INR in 7 days
0.0
0.0

Hi there, I have carefully reviewed your requirements for the Dual-Band microstrip patch antenna array (1x8 and 1x16 configurations). With my extensive experience in RF engineering, I will design and optimize this complex dual-band array using CST Studio Suite, which is highly efficient and accurate for simulating slotted patches, corporate feed networks, and 3D radiation plots for these specific bands (5.925-6.425 GHz and 6.725-7.025 GHz). Here is how I will ensure your project's success: 1. High-Precision Mesh in CST: Setting up an extremely fine mesh to strictly maintain the tight tolerance of ±1 MHz across the entire aperture. 2. Target Gain Optimization: Achieving the ~14 dB for 1x8 and ~17 dB for 1x16 broadside gains using a well-optimized binary feed network. 3. Full Results & Compatibility: I will provide the complete CST project files along with the full results folder. Additionally, I can export the base patch and array geometries into compatible CAD/SAT formats so they can be easily imported into Ansys HFSS if needed. I am fully committed to cooperating with you on any modifications or fine-tuning until the simulation meets your exact expectations. Looking forward to discussing the substrate options and geometry details with you in the chat. Best regards, Aya
₹25,000 INR in 7 days
0.0
0.0

Hello Sir, We can help you with these tasks. We have worked with basic patch and wire antennas. Contact us to discuss the project in more detail.
₹37,500 INR in 7 days
0.0
0.0

Hello, I’ve read your requirements and can deliver both arrays, plus the base patch, as HFSS 2025 R1 projects that open and run right away. Approach: Base patch: A dual-band element (a slot-loaded or stacked patch) on a low-loss substrate such as Rogers RO4003C, tuned to cover 5.925–6.425 GHz and 6.725–7.025 GHz with |S11| < −10 dB. Arrays: 1×8 and 1×16 linear arrays fed by a matched corporate network of T-junction dividers with quarter-wave transformers. Element spacing will be tuned to maximize broadside gain while suppressing grating lobes. Targets: About 14 dBi for the 1×8 and about 17 dBi for the 1×16, both visible in the 3D radiation plot. Deliverables: Three .aedt projects (base patch, 1×8, 1×16), each with its solved results folder. S11, VSWR, 2D/3D gain patterns, surface currents and efficiency for each design. A short design note with dimensions and parameters. Questions: Does the ±1 MHz tolerance mean the band edges must match the specified frequencies within ±1 MHz? Simulated results can meet that, but fabricated boards will drift by more. Could you share the reference document with Objective 2? Do you have a preferred substrate? Bid: [₹35000 amount] | 15 days. Modifications are included until you’re satisfied. Best regards,
₹35,000 INR in 20 days
0.0
0.0

Kolkata, Barrackpore, India
Payment method verified
Member since Nov 5, 2026
$250-750 USD
$30-250 USD
$250-750 AUD
₹750-1250 INR / hour
₹12500-37500 INR
$2-8 USD / hour
$25-50 USD / hour
$250-750 USD
$750-1500 USD
£20-250 GBP
₹600-1500 INR
£20-250 GBP
$250-750 AUD
₹5000 INR
$10-30 USD
£250-750 GBP
₹600-1500 INR
₹1500-12500 INR
€12-18 EUR / hour
£250-750 GBP