Kapalı

PidController arduino

Job Description:

Hello,

I am currently working on a heating control project that uses an Arduino board and a motor-controlled valve to regulate the flow of hot water from a primary circuit to a secondary circuit. The primary circuit is connected to a source of hot water (fernwärme/district heating) that maintains a temperature between 60 and 120 degrees, and a permanent pump that can not be controlled or regulated. The secondary circuit is also connected to a constant-speed pump and the goal is to maintain a temperature of about 40 degrees.

I have implemented a basic control logic using switch cases and if-else statements, but I am having trouble getting the system to accurately regulate the temperature of the secondary circuit. I have read that using a PID controller can help improve the performance of my system, but I have little experience with this type of control and I need some guidance on how to implement it.

I have 4 temperature sensors: Hk_1_TSens_VL (Primary circuit flow) Hk_1_TSens_RL (Primary circuit return) FW_TSens_VL (Fernwärme flow) FW_TSens_RL (Fernwärme return)

I would greatly appreciate it if you could help me with the following:

• Provide an overview of the steps required to implement a PID controller on an Arduino board.

• Help me understand the key parameters that need to be set and how to tune them.

• Provide sample code that I can use as a starting point for my project.

I am available to provide additional information about my project and answer any questions you may have.

Thank you in advance for your help.

Best regards,

Markus Block

Beceriler: Arduino, Elektronik, Mikrodenetleyici, Elektrik Mühendisliği, LabVIEW

Müşteri Hakkında:
( 0 değerlendirme ) Berlin, Germany

Proje NO: #35807463

Bu iş için 31 freelancer ortalamada €16/saat teklif veriyor

sajjadtaghvaeifr

I have worked on similar projects before and worked on realworld projects that have many sensors and accuators and have iot , And i can do this project and happy to help. i have exprience with raspberry pi, arduino, Daha Fazla

€20 EUR / saat tutarından itibaren
(68 Değerlendirme)
7.0
Engrusman877

Hi There, I am a senior Ph.D. Level Expert and Have more than 5 years of experience in electronics and embedded design. Just check my profile and share your details. Time and Budget will be discussed. Thanks

€15 EUR / saat tutarından itibaren
(81 Değerlendirme)
6.1
hayat38402

We are a team of Electrical and Electronics engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries Daha Fazla

€25 EUR / saat tutarından itibaren
(60 Değerlendirme)
6.1
TopRated209

Hello sir! i am electrical engineer and Arduino developer. i have done numerous projects on temperature regulation using PID controller and i have done recently for regulating temperature. i can help you implement you Daha Fazla

€12 EUR / saat tutarından itibaren
(79 Değerlendirme)
5.5
Adeel2k14

Greetings thanks for posting the project there i am electrical engineer i have expertise in embedded systems, PCB designing and circuit designing. I can work on latest engineering tools to complete your task. In my exp Daha Fazla

€15 EUR / saat tutarından itibaren
(36 Değerlendirme)
5.5
ahmed4499

Guten Morgen Herr, ich bin Informatiker und zertifizierter Labview-Architekt, kann ich Ihnen also helfen, danke?

€17 EUR / saat tutarından itibaren
(37 Değerlendirme)
5.6
VTElectronics

Hello Sir I have an Honors degree in Electronic Engineering and I have over 6 years experience developing embedded applications and PCBs. I also have C and C++ Certifications here on Freelancer and you can learn more Daha Fazla

€15 EUR / saat tutarından itibaren
(34 Değerlendirme)
5.7
ManormaShehzadi

Hi Sir! I am student of MSc Mechatronics and Control Engineering. I have done BSc Electrical Engineering. I am very expert in Arduino included its all module (specially esp32).I read your description carefully. I can d Daha Fazla

€12 EUR / saat tutarından itibaren
(37 Değerlendirme)
5.0
inigoherrerag

⭐⭐⭐⭐⭐I am senior Firmware & PCB Design,Java, C#,and C++ Developer ⭐⭐⭐⭐⭐ Hello I am Inigo H. I've seriously read your post and I have understood what you need. I am sure that I can be the best developer who can per Daha Fazla

€15 EUR / saat tutarından itibaren
(5 Değerlendirme)
4.3
bouzayeniabdelwa

As an Electro-mechanical Engineer, I bid on your project because I have the expertise and experience to provide high quality work. I can achieve the results that you are asking for. So , respond to the offer so that we Daha Fazla

€12 EUR / saat tutarından itibaren
(24 Değerlendirme)
4.5
Alimagdi10

I am a mechatronics engineer, have sufficient experience in embedded systems, electronics, arduino, control, PID controller, and C/C++ programming. I have made similar projects before, do not hesitate to send me soon.

€12 EUR / saat tutarından itibaren
(8 Değerlendirme)
4.3
ozdemirmcihad

HELLO; I am working as a research and development manager in a private company. I have more than 5 years of experience in embedded system software and hardware. As for software, I am proficient in microcontrollers such Daha Fazla

€15 EUR / saat tutarından itibaren
(8 Değerlendirme)
4.5
cesur135

HELLO I AM ARDUINO PROGRAMMER I HAVE DONE MANY PROJECTS WITH USING ARDUINO SO I CAN DO YOUR PROJECT TOO

€15 EUR / saat tutarından itibaren
(6 Değerlendirme)
4.1
prabhath86

Hi. I'm Prabhath, from Sri Lanka. I have worked with PID controller programming to control line following robots with Arduino. I have learned the PID control in depth for my engineering degree. I can explain the pr Daha Fazla

€14 EUR / saat tutarından itibaren
(5 Değerlendirme)
3.8
wktham

Hello Markus, I'm Weng Kit. Most of time, you do not need a complex control system for most embedded system problem. Let's start with simple proportional control (P control) to get an acceptable result before implement Daha Fazla

€25 EUR / saat tutarından itibaren
(2 Değerlendirme)
3.9
simulinkcoder

Expert control engineer (more than 10y of industrial experience) with Arduino skills. I can surely help you with this project give to you the knoweldge and support to understand what you are doing.

€18 EUR / saat tutarından itibaren
(3 Değerlendirme)
3.4
mali13175

Hallo, ich kann Ihnen von Schritt 1 bis zum Abschluss des Projekts helfen. Die PID-Regelung zum Erreichen und Aufrechterhalten der erforderlichen Temperaturen kann mit Arduino sehr einfach implementiert werden. Sie hab Daha Fazla

€15 EUR / saat tutarından itibaren
(10 Değerlendirme)
3.8
ahmadbhatti24

Hi, I hope you are doing well. Firstly i will request you to check my profile and portfolio related to control servo motors thats work on built in feedback and working on PID. As they like temperature controller also Daha Fazla

€15 EUR / saat tutarından itibaren
(4 Değerlendirme)
3.5
Engineer1337

appears that this sample code is a good starting point for your project, but you may need to adjust it to work with your specific hardware and control requirements. Also, the code uses global variables which can cause Daha Fazla

€15 EUR / saat tutarından itibaren
(5 Değerlendirme)
2.2
AITSoft

Hello, Upon reading the job details I would say that all the required skills Electronics, Electrical Engineering, Microcontroller, Arduino and LabVIEW fall under my skills. I work on freelancer full time and I believe Daha Fazla

€22 EUR / saat tutarından itibaren
(0 Değerlendirme)
0.0