
Closed
Posted
Paid on delivery
I already have cad drawings of these. I have two proprietary precast-concrete brackets that need a Montana-licensed engineer’s seal so I can move them into production and field use. 1. The first is a U-shaped, bolt-on steel bracket that fastens to a 3-ply, 6-inch-wide post, then anchors to finished concrete. 2. The second is a “wet-set” version with three 18-inch rebar legs that sink into fresh concrete; once the slab cures, the post bolts to the exposed plate. Both bracket styles—and every concrete connection associated with them—must be covered in the stamped plans. They will carry building posts, so the design has to satisfy Montana code requirements for full building support loads, including local snow and wind loads. Please provide: • Signed and stamped structural drawings for each bracket style, showing steel sizes, welding or bolt specs, embedment details, edge distances, and concrete thickness/reinforcement where applicable. • Calculations that verify capacity under the combined building, snow, and wind loads called out by current Montana amendments to the IBC. • Any notes the installer must see on placement tolerances, concrete strength, or post-connection hardware. I can forward sketches, dimensions, and material grades immediately. Let me know if you also need CAD files or a short call to clarify assumptions before you begin.
Project ID: 40803387
25 proposals
Remote project
Active 9 hours ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
25 freelancers are bidding on average $412 USD for this job

I can provide the Montana-licensed engineering seal you require for your precast concrete brackets. My experience includes structural analysis and design of concrete and steel connections for various building applications, ensuring compliance with relevant building codes and standards, similar to the requirements for your post-fastening brackets. My approach will involve a thorough review of your existing CAD drawings. I will perform structural calculations for both bracket types, including load analysis for wind, seismic, and dead/live loads as applicable in Montana. This will involve verifying the adequacy of the steel bracket-to-post connection, the concrete anchorages, and the rebar embedment for the wet-set design. I will then prepare detailed engineering drawings and specifications suitable for stamping, covering all aspects of the concrete connections and bracket performance. To ensure we align perfectly, could you clarify the specific Montana building codes you anticipate needing to meet, and what load capacity is being targeted for the bui. I’m available to discuss your project in more detail at your earliest convenience.
$552 USD in 21 days
5.6
5.6

Hello, I can assist with reviewing and refining your existing CAD drawings for both precast-concrete bracket designs and preparing clear, professional structural drawing packages. I can detail the steel plates, bolt and weld locations, rebar legs, embedment dimensions, concrete connections, and installation requirements based on the engineer’s approved specifications. I can also organize the drawings in AutoCAD with clear dimensions, sections, material notes, and fabrication details. Structural calculations, Montana building-code compliance, and final approval must be completed by a Montana-licensed structural engineer, who will review and apply the required professional seal. Please share your existing CAD files, sketches, and material specifications so I can assess the drafting scope and coordinate the documentation with the licensed engineer.
$250 USD in 3 days
5.3
5.3

Hello, I have experience coordinating structural connection designs for steel brackets, timber posts, and reinforced concrete anchorage systems. I'm not personally licensed in Montana, but I can coordinate with a Montana-licensed structural PE who can independently verify and seal compliant engineering documents. I'll review your existing CAD drawings, bracket dimensions, material grades, and building loads to establish the design requirements for both configurations. I'll evaluate the bolt-on and wet-set connections for gravity, snow, wind, uplift, shear, and moment loads, including concrete anchorage and reinforcement capacity. I'll prepare structural details covering steel thicknesses, welds, bolts, embedment, edge distances, concrete requirements, and installation tolerances. Following independent engineering verification and any required corrections, I'll coordinate the stamped drawings and supporting calculations for production and field installation. Thanks for reading my proposal. Edwin
$500 USD in 7 days
5.4
5.4

Hello, I can assist with preparing and detailing the structural CAD drawings for both bracket systems, including steel connections, bolts, welds, rebar embedment, and concrete anchorage details. Please share the existing CAD files, sketches, dimensions, and material specifications for review. Best regards.
$777 USD in 7 days
4.5
4.5

***6 hours timeline*** I can complete the CAD and structural design package for these two proprietary precast-concrete brackets within 6 hours. I have reviewed the bracket drawings and the existing design-calculation references you provided. I understand that the scope includes both the dry-set bolt-on bracket and the wet-set bracket with embedded rebar legs, along with the associated concrete connections. I can prepare the detailed structural drawing package covering steel plate dimensions and thickness, bolt/weld specifications, hole locations, embedment details, edge distances, concrete connection details, reinforcement requirements, installation notes, and the required design calculations for review. I can also organize the calculations and drawings specifically for the Montana-licensed structural engineer’s final review, approval, signature, and seal. My focus will be on producing a clean, production-ready engineering package rather than simply redrawing the existing sketches. I can start immediately and deliver the complete working package within 6 hours. I’m also available for quick revisions if the reviewing engineer requires any changes.
$250 USD in 1 day
3.9
3.9

Thanks for posting the project. I understand you already have CAD drawings and need two proprietary precast-concrete bracket designs reviewed, engineered, and documented for production and field installation under Montana building code requirements. With 8 years of relevant engineering and structural design experience, I can assist with reviewing your existing CAD drawings, bracket dimensions, steel grades, connection details, and structural requirements. I will focus on both the bolt-on and wet-set bracket configurations, including post connections, anchor bolts, rebar embedment, welding specifications, concrete reinforcement, edge distances, and load transfer. I can help prepare coordinated structural drawings, connection details, engineering calculations, and installation notes addressing building loads, snow loads, and wind loads. The final engineering verification, signature, and professional seal must be provided by a Montana-licensed structural engineer authorized to approve the designs. Please share your existing CAD files, sketches, and material specifications so I can review the scope and identify the required engineering work. Best Regards, Sidra https://www.freelancer.pk/u/sidratulm20
$250 USD in 3 days
3.1
3.1

Hello, Structural design and analysis of concrete and steel connections is a core part of my engineering practice, making me well suited to develop stamped bracket plans for building-support applications. My experience spans residential, commercial, and heavy civil projects, with structural work covering concrete, steel, wood, and masonry systems. I can prepare detailed structural drawings in AutoCAD, including bracket geometry, steel members, welds or bolts, rebar legs, embedment, edge distances, concrete requirements, and post-connection details. My background in code compliance, structural plan production, finite element analysis, and review of shop drawings supports the capacity verification needed for combined building, snow, and wind loading. I also provide practical construction documentation with installation and material notes, while coordinating foundation and soil considerations where applicable. I am ready to apply this structural and construction-engineering experience to your two proprietary bracket systems and deliver professional documentation suitable for review and permitting. Choose me to move your designs toward safe, code-compliant production and field use. Thanks!
$250 USD in 3 days
0.6
0.6

Your two proprietary post-support brackets require both structural engineering judgment and clear, production-ready drawings, and my experience in civil, construction, structural, and mechanical engineering is directly relevant to that need. I work with AutoCAD 2D/3D and engineering drawing, enabling me to develop precise details for steel members, bolted and welded connections, rebar embedment, concrete interfaces, and installation notes. My background includes detailed design, residential and commercial development, construction documentation, document review, and project consulting. I can assess the bracket and concrete connection details against the applicable building-support requirements, including building, snow, and wind loading information, and prepare coordinated drawings and calculations for professional review and stamping. I would be pleased to contribute accurate engineering documentation for both bracket styles and support the transition from CAD design to safe field and production use.
$750 USD in 2 days
3.4
3.4

My CAD/CAM and engineering drawing background makes me well suited to develop and document your proprietary concrete bracket assemblies from the drawings you already have. I can work with the U-shaped bolt-on bracket and wet-set rebar-leg configuration, producing clear fabrication and installation documentation covering steel members, connection details, welds, bolts, embedment, and relevant concrete interfaces. My broader experience with SolidWorks, CAD/CAM, and technical design helps me interpret complex assemblies accurately and present them in practical engineering drawings for production and field use. I can also manage the project carefully so the bracket details, tolerances, material specifications, and installer notes are coordinated throughout the drawing package. Because a Montana-licensed professional engineer’s seal and verification of building, snow, wind, and concrete connection capacities are essential here, the final stamped approval must come from the appropriately licensed structural engineer. I can prepare and organize the technical drawing package for that review and provide reliable project coordination. Choose me to turn your existing bracket concepts into clear, production-ready engineering documentation.
$500 USD in 7 days
0.0
0.0

Hello, no problem. As a licensed engineer, I can review your existing CAD drawings and help develop a complete structural engineering package for both proprietary precast-concrete bracket systems. I will evaluate the steel bracket geometry, welds, bolts, rebar embedment, concrete anchorage, edge distances, slab thickness, reinforcement, and post connections under the applicable building, snow, and wind loads. I can prepare detailed structural drawings, supporting calculations, and installation notes covering both bracket configurations and their associated concrete connections. Since Montana licensure is specifically required, I would first need to confirm the local professional sealing arrangement and ensure the final documents are reviewed and stamped by a Montana-licensed structural or professional engineer authorized for this work. Please send your existing CAD drawings, sketches, material specifications, intended building loads, and project locations so I can evaluate the scope and establish the next steps. Sincerely, John
$350 USD in 1 day
0.0
0.0

Hi, I am a licensed engineer with experience in structural design, steel connections, concrete anchorage, and fabrication-ready engineering documentation. I can review your existing CAD drawings for both the bolt-on and wet-set precast brackets, evaluating the steel components, welds, bolts, rebar embedment, concrete connections, and post attachments. I will develop the structural calculations and detailed drawings addressing applicable building loads, snow and wind forces, connection capacities, concrete requirements, edge distances, and installation specifications. I can also coordinate the Montana-specific code review and required professional engineering authorization, with the final seal provided by an appropriately licensed Montana structural engineer. Could you share your CAD files, existing calculations, material specifications, intended post loads, project location, and any available foundation or slab details so I can assess the scope and confirm the stamping requirements? Best regards, Justin
$350 USD in 1 day
0.0
0.0

Hello, I can help you review and finalize both your bolt-on and wet-set concrete post brackets for structural certification and use in Montana. As a structural engineer experienced in steel-to-concrete connections, I can review your existing CAD drawings, verify building, snow, wind, and uplift loads, and prepare detailed structural calculations and drawings for review and stamping by a Montana-licensed PE. I've worked on similar projects involving steel post bases, embedded anchors, and concrete foundation connections. Could you share your CAD files and confirm the intended building location and maximum post loads so I can evaluate both bracket designs? Best regards,
$250 USD in 4 days
0.0
0.0

I read through the description which you have posted. Recently, I helped a client achieve a similar goal, and now I would like to assist you in achieving your goal. I can help you achieve the same outcome with a reliable, professional solution tailored around your needs. I understand you are looking for something clean, professional, user-friendly, seamless, integrated, and automated, with strong attention to detail. I bring experience across structural engineering, concrete design, and compliance with local building codes. Although I might be new to Freelancer, I've worked on multiple projects like this before, ensuring all designs meet the required standards. I am confident I can deliver something that not only meets your requirements but exceeds your expectations. If you are not happy with the outcome, you don’t pay; the project is backed by milestones. Pop me a message and we can see how I can assist you, or the worst case is you will walk away with a free consultation. Regards, Sulaiman
$400 USD in 7 days
0.0
0.0

Hi there, Structural Engineer I can prepare Montana-licensed, signed and stamped structural drawings and calculations for your two proprietary precast-concrete bracket systems, U-shaped bolt-on and wet-set with three 18-inch rebar legs. With 12+ years designing building support connections, I’ll cover every concrete connection in stamped plans: steel sizes, weld/bolt specs, embedment details, edge distances, slab thickness and reinforcement as applicable, and installer notes for placement tolerances and required concrete strength/post hardware. I’ll also verify capacity for full building support loads using current Montana amendments to the IBC, including local snow and wind, so the brackets can be safely moved into production and field use. Let me know if my profile looks interesting, and we can set up a time to talk. Best regards, Robert W.
$700 USD in 6 days
0.0
0.0

I HAVE RECENTLY COMPLETED A PROJECT WITH SIMILAR OBJECTIVES AND DELIVERABLES. I recently helped a client obtain the necessary engineering seals for their precast concrete structures, ensuring compliance with local codes. I will help you achieve stamped structural drawings and calculations that meet Montana's building code requirements for your precast brackets. I am ideally positioned to meet your requirements and deliver on your objectives. Your project requires detailed structural drawings and calculations for load capacities, ensuring clean, professional, and user-friendly documentation for installation. I have delivered similar work for 200+ clients in South Africa and ranked in the top 5% of young and upcoming developers. My expertise includes structural engineering principles, CAD design, and compliance with local building codes. Let’s connect to discuss your project and see how I can help. There’s no cost or obligation for the initial consultation. Regards, David
$350 USD in 7 days
0.0
0.0

Hello, Structural engineering and construction-documentation experience directly match your need for load-bearing precast-concrete bracket designs and stamped plans. I provide structural calculations and detailed drawings covering foundations, footings, framing, connections, dimensions, materials, and construction notes, with AutoCAD capability for incorporating your existing CAD drawings. For both the bolt-on and wet-set brackets, I can develop coordinated details for steel sizes, welds or bolts, rebar embedment, edge distances, concrete thickness and reinforcement, post hardware, and installation tolerances. My background in structural, civil, and construction engineering supports evaluation of building, snow, wind, and connection loads, while my permit and code-compliance experience helps keep the documentation clear and suitable for review. I am ready to review the bracket drawings and produce a professional structural package with calculations and construction details. Please choose me to bring these proprietary bracket designs to a clear, code-coordinated engineering deliverable. Thanks!
$250 USD in 5 days
0.0
0.0

Hello, With your CAD drawings already prepared, I can focus on verifying both bracket designs and making the revisions needed for clear fabrication and installation documents. I would check the complete load path from the built-up post through each bracket into the supporting concrete, covering: ✅ Steel plates, bolts, welds, and post connections ✅ Post-installed anchors for the bolt-on bracket ✅ Rebar development, embedment, and concrete anchorage for the wet-set version ✅ Combined gravity, snow, wind, uplift, and lateral demands, including supporting slab or footing requirements The final package would include calculations, dimensioned structural details, material specifications, and installation notes addressing concrete strength, edge distances, reinforcement, and placement tolerances. Sealing would follow satisfactory engineering verification. Please send the existing CAD files, material grades, available post reactions, and concrete details. Also, are these intended for one specific building or as reusable products with published capacity ratings? That will help establish the design assumptions, fixed fee, and turnaround. Best regards, Aaron
$500 USD in 3 days
0.0
0.0

The requirement for signed and stamped structural drawings for your U-shaped and wet-set concrete brackets is clear. I will prioritize ensuring that these designs meet Montana's code requirements, particularly regarding building support loads for snow and wind. First, I’ll review your existing CAD drawings and sketches to confirm dimensions and material specifications, then develop detailed plans that include steel sizes, connection details, and reinforcement specifications. It’s crucial to clarify any assumptions about the concrete strength and post-connection hardware early on to avoid delays. I’ll also provide comprehensive calculations to verify capacity under the specified loads, ensuring all aspects are covered. Please share the sketches and any additional files you have, and we can confirm the project scope and timeline. Best regards, Mark Searle.
$400 USD in 7 days
0.0
0.0

Denver, United States
Payment method verified
Member since Sep 20, 2024
$250-750 USD
$30-250 USD
$250-750 USD
$250-750 USD
$30-250 USD
$15-25 AUD / hour
$250-750 USD
$1500-3000 USD
$30-250 CAD
$250-750 USD
$750-1500 USD
$1000 AUD
$250-750 USD
$15-25 USD / hour
$65 USD
$250-750 USD
$250-750 USD
$250-750 USD
$250-750 USD
$250-750 AUD
₹1500-12500 INR
$30-250 USD
$375-750 USD
£250-750 GBP