Tamamlanmış

Prepare engineering drawings of a constructed wetland system

My company builds waste management systems for animal farms. We use an innovative constructed wetland to manage the manure and convert it to organic fertiliser and bioenergy fuel.

We require some engineering drawings to be prepared describing the system for engineering approval by the environmental regulator in north Carolina usa.

These are not detailed drawings, instead they aim to simply inform an approver of the system prior to submitting detailed drawings.

I have sketched some drawings indicating what I am looking for.

I'm looking for some drawings in plan and section view, showing the structure and the waterproofing of the system.

Our system is built like a long swimming pool, above ground with the walls made of precast concrete panels. The bottom has a plastic liner. On the liner are placed drain pipes, and sand and gravel filter media, to a specified depth. The entire system is covered in a greenhouse, to keep off rain and let the waste dry out. We plant reeds inside the system and they help dry the material.

I have also attached a couple of graphics which show the system in more detail, including one which is a broken up version of the wetland showing the different parts. This should help you understand what I'm talking about.

I'm looking for an experienced draftsperson to prepare these drawings. Good English is helpful.

Beceriler: AutoCAD, CAD/CAM, İnşaat Mimarisi, İnşaat Mühendisliği, Makine Mühendisliği

Daha fazlasını gör: ripple soft firm dealing mostly structural engineering drawings, engineering drawings complex plastic parts, types prepare mechanical drawings chemical plant, best plants for constructed wetlands, surface flow constructed wetlands, constructed wetlands ppt, components of constructed wetlands, constructed wetlands design, a handbook of constructed wetlands volume 2, constructed wetlands in india, constructed wetlands examples, requirement digitization engineering drawings, digitalizing engineering drawings, engineering drawings indesign, 2d3d sample engineering drawings using autocad 2009, vectorize engineering drawings, autiting engineering drawings, engineering drawings canada, airbus a380 engineering drawings, mechanical engineering drawings

İşveren Hakkında:
( 7 değerlendirme ) darwin, Australia

Proje NO: #20107571

Seçilen:

                                                    kalp29
                                                's Profile Picture"                                                    >
                                                </a>
                                            </figure>
                                        </div>
                                        <div class=
kalp29

Hello sir I am professional engineer with first class .I am capable in 2d drawing , 3d modelling , 3d rendering etc from past decade. please give me an opportunity to work. Regards kalp

%selectedBids___i_period_sub_7% gün içinde 140%project_currencyDetails_sign_sub_9% %project_currencyDetails_code_sub_10%
(144 Değerlendirme)
6.8

Bu iş için 45 freelancer ortalamada $177 teklif veriyor

Nadezhda2604

Hello! I can make engineering drawings of your waste system in AutoCAD 2016 with all necessary details and layers. I work in AutoCAD almost 10 years and have done a lot of different architectural and technical drawings Daha Fazla

$250 USD in 4 gün içinde
(200 Değerlendirme)
7.5
rabbora

I am Architect. I am very interest in your project. I have experience to design, rendered and animated many buildings and landscapes(2D and 3D) using Autocad, 3ds max, sketchup, revit and lumion. If you look at my p Daha Fazla

$150 USD in 3 gün içinde
(138 Değerlendirme)
7.1
yongjun514

Dear, Sir. Here is my profile and portfolio link. https://www.freelancer.com/u/yongjun514?w=f I have read your project descriptions carefully. So I think I can complete it successfully in your timeline. If you hire me Daha Fazla

$150 USD in 3 gün içinde
(156 Değerlendirme)
7.2
DenkaPolosich

Hi. My name is Denka. I'm from Ukraine. I'am an Licensed Architect and creative designer . I checked your project post carefully and I have a great interest for your job. I can help you I will send some similar examp Daha Fazla

$250 USD in 3 gün içinde
(92 Değerlendirme)
6.9
haihothi

Hi, I am an Architect (From 2012-present) I have experience in design, modeling, rendering, animation architecture buildings, houses, shops...etc I have skill in 3Dsmax, Sketchup, Lumion 3D, Revit, Auto Cad... I alway Daha Fazla

$150 USD in 3 gün içinde
(153 Değerlendirme)
6.8
Sourabh071092

Hi, I can do this Engineering drawing project for you. I have extensive experience in drafting and converting sketches to professional drawings and possess excellent command in English Please check my similar work sam Daha Fazla

$250 USD in 3 gün içinde
(76 Değerlendirme)
6.1
ramyhelmy

I am a registered mechanical engineer in Australia with more than 4 years of experience in mechanical engineering and CAD

$200 USD in 4 gün içinde
(60 Değerlendirme)
6.2
valentinbudeanu

Hello ! Your project is of much interest to me and I would be pleased to do it. During my work, I will provide the ultimate revisions and make all the necessary changes upon request until you are completely satisfied. Daha Fazla

$200 USD in 3 gün içinde
(77 Değerlendirme)
6.0
yashgargmech

Hi, I am interested in this project. Could we please discuss. Please see my qualification and experience below. MSC IN MECHANICAL ENGINEERING, UNIVERSITY OF SUSSEX I have 8 years experience in Mechanical design, ma Daha Fazla

$250 USD in 7 gün içinde
(21 Değerlendirme)
5.4
Fsafavian

Greetings, My name is Seyed F. Safavian and I'm a California licensed P.E. active in land development and civil site design. Cool idea I must say, but not practical since the NPDES and EPA regulations will be violated Daha Fazla

$250 USD in 3 gün içinde
(13 Değerlendirme)
5.1
EngOussamaBaaziz

Hi, I saw your project so I confirm that I can perform requested work with excellent quality within 6 days I am a mechanical engineer armed with 12 years of professional experience as an R&D engineer. 3D and 2D CAD d Daha Fazla

$277 USD in 4 gün içinde
(28 Değerlendirme)
5.3
lizzasadim

greetings I'm a detailed-oriented designer with creativity & proven problem-solving skill. I have more than 15 years of experience in design and development for both residential and commercial projects as well as temp Daha Fazla

$100 USD in 3 gün içinde
(33 Değerlendirme)
5.2
lmorillocdl26

Dear Sir. I would like to have the opportunity to talk with you in the chat, about this project. I am a Mechanical Engineer with specialization: - Industrial design - Fluid Power Systems. - 3D Modeling - 3D Printing Daha Fazla

$71 USD in 2 gün içinde
(21 Değerlendirme)
4.6
ELSAIYAD

Hello Sir , I am a senior Engineer with 11 years of Experience , I checked attached Files and I can Do the job My best Regards , Elsaiyad

$350 USD in 7 gün içinde
(25 Değerlendirme)
5.0
JangXing2

Hello. I have read your project description and I am very interested in your project. I would like to help your business by doing my best. Let's discuss in detail over chat. Thanks for your attention. Regards

$200 USD in 5 gün içinde
(3 Değerlendirme)
4.8
HammadurRehman94

hello, i am a mechanical engineer with a team of architects and mechanical engineers, i have read the post and i understand your requirement of wet land facility layout for authorization. i can provide the schematic Daha Fazla

$235 USD in 4 gün içinde
(19 Değerlendirme)
4.6
jackjonson1990

hello I am an architect. I am very interested in your project. I have many experiences in building architecture, revit, MEP design, sketchup, cad design, 3d modelling and rendering. If you give me your details, I can d Daha Fazla

$140 USD in 7 gün içinde
(19 Değerlendirme)
4.7
nextwheels

i provide architectural design , interior design , revit modeling high detailing level. i have 12 years experience in this field , please check my profile , reviews. please send chat message to receive sample of my wo Daha Fazla

$85 USD in 3 gün içinde
(8 Değerlendirme)
3.9
arditmurati1990

Hi, My name is Ardit. I am Mechanical Engineer and I have 5+ years experience in 3D Modeling and Design, I can work with SolidWorks, Autodesk Inventor and AutoCAD, Please check my portfolio. If you need more informat Daha Fazla

$50 USD in 7 gün içinde
(16 Değerlendirme)
3.8
karthikeyansm92

Hello, I have done my masters degree in Structural Engineering at UNSW, Sydney. I have more than 4.5 years of experience in India and Australia. I have also done projects in China, Iraq, Hong Kong and Ireland. Currentl Daha Fazla

$150 USD in 4 gün içinde
(10 Değerlendirme)
3.7