
In Progress
Posted
Paid on delivery
I already have a CentOS-based server fitted with a working PRI/E1 card and a clear set of inbound and outbound call rules. What I need now is a clean FreePBX (Asterisk) installation, fully integrated with that PRI circuit, and ready for day-to-day use. Here’s the scope in plain terms: • Install and configure the latest stable FreePBX/Asterisk stack on the existing Linux server. • Tie the PRI span into DAHDI so calls flow reliably both ways. • Implement my pre-defined call routing: incoming numbers must ring the correct extensions and outbound permissions should follow the rules I provide. • Provision ten softphones right away—eight on desktop (SIP or PJSIP) and two on Android—so they register securely and can place/receive calls over the PRI. • Hand over a brief set of admin notes: how to add a new extension, adjust a route, or pull basic CDR reports. I’ll supply the dial-plan spreadsheet, extension list, and any SIP credentials you need as soon as we start. Once everything passes live-call testing on all ten endpoints, the project is complete.
Project ID: 40797344
11 proposals
Remote project
Active 5 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
11 freelancers are bidding on average ₹7,387 INR for this job

Over 10 years as a VoIP and systems engineer, I have implemented and supported FreePBX, Asterisk, 3CX, Vodia and Cisco CUCM/CME environments—directly matching your need for a reliable Asterisk installation integrated with an existing PRI/E1 circuit. My Linux server administration and Asterisk PBX expertise cover the core requirements: DAHDI/PRI integration, inbound and outbound call routing, extension provisioning, SIP/PJSIP registration and live-call troubleshooting. I can configure the eight desktop softphones and two Android endpoints, apply secure registration practices, and validate calling across all ten endpoints against your defined rules. I will also provide concise administrator notes covering extension creation, route changes and basic CDR reporting. My network and VoIP background helps me troubleshoot the full path from the PRI card through the PBX to each endpoint. I am ready to take responsibility for delivering a clean, usable FreePBX system.
₹10,000 INR in 3 days
7.1
7.1

Hi, As I have experience in installing/configuring and setting up call center with Freepbx and various asterisk based web solution. I can able to complete this project with all features. And can give you after go-live support. Thanks,
₹10,000 INR in 7 days
4.4
4.4

Hi, I can set up your FreePBX and Asterisk stack on your CentOS server, ensuring your PRI/E1 card is correctly integrated for stable, two-way voice traffic. I will handle the DAHDI configuration and implement your specific inbound and outbound routing rules to ensure calls reach the right extensions every time. I have extensive experience managing Linux-based telecommunications systems and SIP environments, focusing on secure endpoint registration and reliable circuit connectivity. • Full installation of the latest stable FreePBX/Asterisk stack. • DAHDI configuration for the PRI span to enable reliable call flow. • Implementation of your custom dial-plan, routing rules, and extensions. • Provisioning and securing 8 desktop and 2 Android softphones. • Delivery of admin documentation for extensions, routing, and CDR reports. Do you have the specific DAHDI configuration details for your PRI card ready, or should we determine those during the initial server audit? Let's connect in chat so we can get started right away! Best regards, Mohammad Juned
₹6,400 INR in 4 days
2.0
2.0

I built a production voice system for a tier-1 bank over SIP and Asterisk, with call recording, DTMF handling and per turn latency tracing. For your CentOS server I would install the current stable FreePBX and Asterisk, bring the PRI/E1 span up in DAHDI and confirm clocking and channel state before touching routing. Then I would build your inbound and outbound routes from the dial plan spreadsheet, register the eight desktop and two Android softphones on PJSIP with strong secrets and TLS where the clients support it and test live calls on all ten endpoints. You get short admin notes covering new extensions, route changes and CDR reports. Which PRI card model and CentOS version are on the server? Regards, Hassan
₹5,600 INR in 8 days
0.0
0.0

You want a clean FreePBX on your existing CentOS box, the PRI span live through DAHDI, your routes in place, and ten phones making and taking calls. I can set that up over SSH and hand it over documented. Plan: - Check the card first: dahdi_hardware, dahdi_scan, span alarms and timing, before touching FreePBX - Install the current stable FreePBX/Asterisk, DAHDI and libpri, then bring the span up and confirm it is green in Asterisk - Build trunks, inbound routes to the right extensions and outbound routes with your permissions from the spreadsheet - Create 10 PJSIP extensions with strong passwords, firewall and fail2ban on, then set up 8 desktop and 2 Android softphones - Admin notes: add an extension, change a route, pull CDR reports Timeline: 2 days once I have SSH access and your dial plan sheet. Before release we run live calls together on all ten endpoints, inbound and outbound over the PRI, and you see each one pass. Key-based SSH is all I need, no passwords shared in chat. Quick question: is the PRI E1 with ISDN signalling from your telco (which provider), and does the server have a fixed public IP or is it behind NAT? Chaman
₹1,500 INR in 2 days
0.0
0.0

Hi, there. Recently deployed FreePBX 16 on CentOS 7 for a logistics firm using a Sangoma Vega 3000G PRI gateway, migrating 50 extensions from legacy Nortel. Configured DAHDI with PRI NET side signaling to resolve clock slip issues causing intermittent audio drops. Built custom context includes for time-condition routing and implemented PJSIP transport hardening with TLS/SRTP for remote mobile endpoints. I am planning a clean FreePBX 17 install via the official ISO repo to ensure kernel-DAHDI module alignment, compiling dahdi-linux against the running kernel for the on-board PRI card. I offer to map your spreadsheet DIDs directly to inbound routes using bulk handler CSV import, enforce outbound permissions via Class of Service modules, and provision the ten endpoints using EPM with custom PJSIP templates enforcing ICE/STUN for the Android clients. CDR reporting will leverage the UCP reports module with scheduled email exports. If I use my previous experience, your project will likely be completed successfully. Hope to discuss this in detail. Through detailed discussion, I think I can find the better solution to finish your project successfully. Thank you
₹7,000 INR in 7 days
0.0
0.0

Hi there, I would love to assist you with this deployment. I have hands-on, professional experience with Asterisk, FreePBX, DAHDI configuration, and PRI/E1 trunk integration on CentOS environments. Your scope is very clear, and I can have this system fully configured, tested, and handed over to you smoothly. Timeline: I can complete and fully test this project within 2 days of receiving access and your dial-plan spreadsheet. Milestones / Approach: Stack Setup: Clean install/configuration of the latest stable FreePBX/Asterisk stack on your existing CentOS server. DAHDI & PRI Integration: Configure the PRI span, ensure proper signaling, and verify error-free trunk synchronization. Routing: Implement your inbound/outbound rules precisely as outlined in your spreadsheet. Endpoint Provisioning: Register and secure the 8 desktop softphones (SIP/PJSIP) and 2 Android mobile clients. Testing & Handover: Live-call testing across all 10 endpoints + concise admin notes. Quick question: Is your CentOS server running version 7, 8, or 9, and do you already have root SSH access prepared? Ready to start immediately! Best regards, Charles
₹10,000 INR in 2 days
0.0
0.0

Hi, I am excited to assist you with the setup of FreePBX on your CentOS server equipped with a PRI/E1 card. With over three years of hands-on experience in server management and deployment automation, I am well-prepared to deliver a robust solution tailored to your needs. My approach will ensure a seamless integration of FreePBX with your existing infrastructure. I will focus on: - Configuring the FreePBX system for optimal performance on the PRI line. - Ensuring proper inbound and outbound call routing as per your specifications. - Implementing security measures to protect your communications. - Conducting thorough testing to guarantee reliability and functionality. I will also provide documentation for the setup process, enabling you to manage the system effectively moving forward. My goal is to create a high-performance, scalable, and secure telephony solution that meets your business requirements. Looking forward to the opportunity to collaborate on this project. Best regards, Shyam Prajapati
₹10,005 INR in 10 days
0.0
0.0

You need FreePBX/Asterisk installed on your CentOS server, your PRI/E1 card tied in through DAHDI, your dial plan implemented and ten softphones registered. I'm a computer engineer with a Linux and networking background, and I deployed and configured around 100 PCs at Hospital de Castro in 2025. Plan: 1) review the CentOS version and card model, and pick a compatible FreePBX release; 2) install it and configure the DAHDI span; 3) set up inbound/outbound routes from your spreadsheet; 4) set up PJSIP extensions with strong secrets and a firewall; 5) run live-call tests on all ten endpoints; 6) write admin notes. Remote SSH access is all I need. Which PRI card model and CentOS version is the server running?
₹9,000 INR in 5 days
0.0
0.0

Mumbai, India
Payment method verified
Member since Oct 14, 2026
₹1500-12500 INR
₹600-1500 INR
₹400-750 INR / hour
$5000-10000 USD
$25-50 USD / hour
$15-25 USD / hour
₹1500-12500 INR
$30-250 USD
$30-250 AUD
₹600-1500 INR
$10-30 USD
$15-25 USD / hour
₹600-1500 INR
$10-30 CAD
$10-30 USD
₹600-1500 INR
$2-8 USD / hour
$30-250 USD
₹600-1500 INR
₹1500-12500 INR
$2-8 USD / hour
$250-750 USD