
Closed
Posted
Paid on delivery
I am seeking a Nevada-licensed professional engineer to provide structural drawings, calculations, and a stamped set of plans for a foundation retrofit on an existing cabin so the structure can be brought into compliance with Elko County building permit requirements. Project summary • Structure: Existing 12 ft × 20 ft cabin (approximately 240 sq ft) • Location: Pilot Peak area, Elko County, Nevada • Current status: The cabin has already been constructed. The foundation does not currently meet local permit standards and requires a retrofit design that can be submitted for permit approval. • Scope requested: Structural design for a foundation retrofit (or new foundation system as required) that will support the existing cabin and satisfy Elko County requirements, including frost depth, soil bearing, and applicable snow/wind/seismic loads. What I need from you 1. Structural plans and details suitable for permit submittal. 2. Plans and calculations stamped/sealed by a Nevada-licensed Professional Engineer (wet or approved digital signature as required by the county). Information I can provide • Approximate site location / parcel information • Photos of the existing cabin and current foundation • Basic dimensions and construction details of the cabin • cabin plans pdf Please let me know: • Whether this type of retrofit falls within your practice • Approximate fee range and typical turnaround time • What additional information or site access you would need to prepare a proposal • Whether a site visit is required or if remote review of photos/measurements would be sufficient for a preliminary scope I am ready to move forward quickly once I have a clear proposal. Thank you for your time and consideration. I look forward to hearing from you.
Project ID: 40795342
45 proposals
Remote project
Active 15 hours ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
45 freelancers are bidding on average $415 USD for this job

Hello, I am a Strucutral engineer with 10+ years experience, I am expert in Structural analysis and designs of different structures so i can do the required design drawings and calculations in the required time. I have finished similar projects before and finished 600+ projects. Please check my portfolio and reviews. Thanks.
$250 USD in 3 days
8.7
8.7

My structural engineering and building-regulation skills, supported by AutoCAD and BIM experience, align closely with preparing permit-oriented plans for your 12×20 cabin foundation retrofit. I can develop clear construction drawings and structural details for an existing cabin, addressing the foundation system and the applicable code considerations for Elko County. My background in civil and structural engineering, building design, and construction documentation enables me to coordinate the existing cabin information with the proposed retrofit design. I can also prepare the drawings and supporting calculations in a professional format suitable for review. Because the requested seal must come from a Nevada-licensed Professional Engineer, the final stamped submission would need to be completed by, or coordinated through, the appropriately licensed Nevada PE. I am ready to contribute the design, drafting, and engineering documentation for this project and would be glad to discuss the retrofit scope and permit package with you.
$258 USD in 3 days
7.5
7.5

Hello, Structural Engineering and AutoCAD are central to my work, making me well suited to develop clear foundation-retrofit drawings and supporting calculations for your existing 12×20 cabin. My multidisciplinary engineering background also supports practical evaluation of the cabin, its current foundation, and the structural requirements affecting a permit-ready solution. I can prepare detailed structural plans for the retrofit or replacement foundation, addressing the applicable soil-bearing, frost-depth, snow, wind, and seismic considerations identified for the Elko County location. My experience across civil, structural, environmental, and building-architecture work helps me coordinate the design with the existing structure and present it clearly for review. Because Nevada licensure and sealing are specific requirements, the final stamped submission must be completed by a Nevada-licensed Professional Engineer authorized to seal this work. I would be pleased to support the engineering documentation and coordinate toward a compliant permit package. Thanks!
$750 USD in 3 days
6.6
6.6

Structural engineering and AutoCAD drafting are directly aligned with your cabin foundation retrofit and permit-plan requirements. I can prepare accurate structural drawings and details for the existing 12×20 cabin, incorporating the foundation design considerations described for Elko County, including frost depth, soil bearing, snow, wind, and seismic loads. My experience in civil and structural engineering, building design, architectural plans, BIM, and AutoCAD enables me to produce clear, permit-oriented documentation for an existing structure. I can also review the cabin plans, dimensions, photos, and foundation information to develop the retrofit or replacement foundation design and supporting calculations. Any required Nevada PE stamp and seal would need to be provided by a Nevada-licensed Professional Engineer authorized to seal work in Elko County. I am ready to contribute precise engineering and drafting support for this project and would be pleased to discuss the scope, fee, and turnaround with you.
$266 USD in 1 day
6.9
6.9

Hello, I am a structural engineer Have 20 years of experience. Have NV PE license I can help you with the design and permit/construction drawings. I use Revit or Autocad. Thanks!
$750 USD in 8 days
6.1
6.1

My structural engineering experience is focused on code-compliant plans and permit documentation for residential and commercial projects, making this foundation retrofit for your existing 12×20 cabin a strong match for my practice. I can prepare coordinated structural drawings, details, and calculations addressing the foundation system and the applicable building-regulation requirements for Elko County. My civil, structural, and architectural capabilities allow me to evaluate the existing cabin information, develop a practical retrofit or replacement foundation design, and coordinate the documentation for permit submission. I am experienced with AutoCAD, building regulations, construction documentation, and multidisciplinary coordination, so the final package can clearly communicate the proposed work to the reviewing authority. Any Nevada PE stamping and site-review requirements would be handled in accordance with the responsible Nevada-licensed engineer’s authorization and county requirements. I would be glad to review the cabin plans, photographs, dimensions, and site information and provide a clear proposal for the required documentation and engineering scope. Choose me for a practical, permit-focused structural solution.
$500 USD in 7 days
6.3
6.3

I can deliver the stamped structural plans for your 12x20 cabin foundation retrofit, similar to how I've successfully navigated Elko County's specific foundation retrofit requirements for other small accessory dwelling units. My process ensures compliance with their unique permit standards. My approach involves a site assessment (if possible, otherwise relying on provided dimensions and photos) to understand the existing foundation. I'll then perform load calculations based on Elko County's prescriptive or performance-based requirements, likely focusing on seismic and wind loads. The design will utilize standard concrete and rebar detailing, ensuring constructability and adherence to code. I'll generate detailed CAD drawings and comprehensive calculation reports, culminating in a Nevada PE-stamped set of plans ready for submission. Could you clarify if there are any specific soil bearing capacity concerns or if the cabin's intended occupancy has changed since its initial construction? I'm available to discuss the project details further at your convenience.
$592 USD in 21 days
5.7
5.7

Hello, I have experience designing residential foundation retrofits, including cabin foundations, structural reinforcement, and permit-ready engineering drawings. I'm not personally licensed in Nevada, but I work with an actively licensed Nevada PE who can independently review and seal compliant structural designs. I'll review your cabin plans, existing foundation photos, and site conditions to determine the most practical retrofit solution. I'll prepare foundation plans, footing and anchorage details, and structural calculations addressing soil bearing, frost depth, snow, wind, and seismic loads. I'll coordinate the Nevada PE review and seal, deliver permit-ready PDFs, and determine whether remote verification is sufficient or a site inspection is necessary. Thanks for reading my proposal. Edwin
$500 USD in 7 days
5.4
5.4

My 8+ years of experience producing residential construction and permit drawings make me well suited to document your existing 12×20 cabin and develop clear foundation-retrofit plans for review. I am a qualified architect experienced with AutoCAD, Revit, as-built drawings, renovation plans, and construction documentation for USA projects.
$250 USD in 2 days
4.9
4.9

Hi , I’ve carefully reviewed your project "Structural Plans for 12x20 Cabin", and I’m confident that my experience with Building Regulations, Construction Management, Environmental Engineering, Civil Engineering, Building Architecture, Project Management, Building Design, Building Information Modeling, AutoCAD and Structural Engineering makes me a strong fit for this project. I have 8+ years of experience developing and completing similar projects, and I understand the importance of delivering reliable, efficient solutions. I can help you with your project from start to finish and will make sure the final result meets your requirements and expectations. I’m also happy to discuss the details, understand your specific goals, and suggest the best approach. If you’re interested, click the Chat button and send me a message. I’d be happy to discuss your project and get started. I look forward to hearing from you. Best regards, Viggo
$250 USD in 4 days
3.9
3.9

Hi, I can help with the structural drafting, foundation retrofit design, and engineering documentation for your cabin. I’ll review the existing plans, foundation photos, and site details to determine the most suitable solution and address Elko County’s requirements, including frost depth, soil bearing, and structural loads. I can also coordinate with a Nevada-licensed PE for the required review, calculations, and stamped plans. My goal is to provide a clear, permit-ready drawing package. I’m ready to review your documents and discuss the next steps.
$750 USD in 1 day
3.1
3.1

Hi, good day. I understand you need a structural foundation retrofit for an existing 12×20 ft cabin in Pilot Peak, Elko County, to meet local building permit requirements. I can help review your existing cabin plans, foundation photographs, and construction details, then develop the required foundation design, structural calculations, connection details, and permit-ready drawings addressing soil bearing, frost depth, snow, wind, and seismic loads. Final documents and stamped approval must be provided by a Nevada-licensed PE, with the need for a site visit determined after reviewing the available information. Do you have existing foundation dimensions and soil information, or will these need to be established through a site assessment? Best
$500 USD in 7 days
0.6
0.6

Hello, As a licensed Professional Engineer with over 16 years of experience in civil and structural engineering, I am well suited to design the foundation retrofit for your existing 12×20 cabin and prepare documentation for Elko County permit review. My background includes structural analysis and design for wood, steel, and concrete systems, along with renovation plans, as-built drawings, engineering calculations, and complete permit-ready construction documents. I can evaluate the existing cabin and foundation information, account for applicable frost, soil, snow, wind, and seismic requirements, and develop structural plans and details for a compliant retrofit or replacement foundation system. My proficiency with AutoCAD and building design supports clear, precise drawings, while my understanding of U.S. building codes and permitting processes allows me to provide stamped engineering documents where required. I am ready to apply my structural and civil engineering expertise to this retrofit and provide a clear, technically sound proposal for the required plans and calculations. Thanks!
$250 USD in 3 days
0.0
0.0

Hello, My structural engineering experience includes foundation and footing plans, structural calculations, framing layouts, and permit drawing packages, directly matching the needs of your existing 12×20 cabin foundation retrofit in Elko County. I can prepare clear structural details and coordinated CAD drawings for a retrofit or replacement foundation system, addressing the existing cabin conditions and the applicable design requirements for frost depth, soil bearing, snow, wind, and seismic loading. My background in civil and structural engineering, AutoCAD drafting, building design, and permit/code documentation supports a practical submittal package suitable for county review. I can also work from your cabin plans, photos, dimensions, and site information when developing the preliminary scope. Stamping and sealing would be subject to verification of Nevada licensure and authority to seal work in Elko County. I am ready to review this retrofit professionally and provide a clear proposal for the structural plans, calculations, and permit documentation. Thanks!
$250 USD in 6 days
0.0
0.0

Hello, no problem. As a licensed engineer, I can help evaluate the existing 12' × 20' cabin and develop a structural foundation retrofit design addressing the current foundation deficiencies and applicable Elko County permit requirements. I will review the cabin plans, existing foundation configuration, site conditions, frost-depth requirements, soil-bearing assumptions, and applicable snow, wind, and seismic loads to determine an appropriate retrofit or replacement foundation system. The deliverables can include structural drawings, foundation sections and connection details, supporting engineering calculations, and a coordinated permit-submittal package. Please send the cabin PDF plans, site location or parcel information, existing foundation photos, construction details, available soil information, and any comments already received from Elko County so I can assess the scope and identify whether additional measurements, geotechnical information, or a site visit will be necessary. Before committing to Nevada-stamped deliverables, I would also confirm Nevada PE registration and sealing authority; after reviewing the information, I can provide a realistic fee range and turnaround estimate. Sincerely, John
$500 USD in 2 days
0.0
0.0

Hello, My AutoCAD, Building Architecture, and Building Information Modeling skills can support the preparation of clear structural and architectural drawing documentation for your existing 12×20 cabin foundation retrofit. I also bring 16+ years of professional experience in technical and creative development, including 3D modeling, visualization, and detailed design work using tools such as Autodesk Maya, Blender, and 3ds Max. This background is valuable for accurately interpreting your cabin plans, photos, dimensions, and current foundation conditions into organized permit-submittal drawings. However, the requested Nevada-licensed Professional Engineer stamp, structural calculations, and confirmation of Elko County compliance require a qualified Nevada-licensed PE. I cannot truthfully represent myself as holding that license or provide a sealed engineering set. I can contribute the drafting, modeling, and documentation portion of the work for coordination with a licensed structural engineer. I would be glad to support your project with accurate AutoCAD/BIM drawings and professional visualization. Thanks!
$555 USD in 1 day
0.0
0.0

Hello, Our team’s 50+ years of hands-on construction experience make us well suited to document an existing cabin retrofit with practical, buildable details. We understand how framing, foundations, site conditions, and field execution affect permit drawings, not just how they appear on paper. We specialize in AutoCAD drafting, building design, permit sets, construction documentation, as-built drawings, and structural drawing coordination. That experience can support clear foundation retrofit plans and details for your 12×20 cabin, coordinated with the existing construction and prepared for review against Elko County requirements. Our construction management background also helps us identify conflicts between the proposed design and actual site conditions. Because the requested sealed calculations and plans must come from a Nevada-licensed Professional Engineer, the final engineering stamp would need to be provided by an appropriately licensed Nevada PE. I can support the drawing, documentation, and coordination side of the project and help develop an organized permit-ready package. I welcome the opportunity to discuss the cabin retrofit and contribute reliable, accurate documentation. Thanks!
$555 USD in 2 days
0.0
0.0

Hello , How are you? I’m an engineer with good experience in Construction Management, Building Information Modeling, Civil Engineering, Environmental Engineering, Project Management, Building Design, Building Architecture, AutoCAD, Building Regulations and Structural Engineering to help you complete your project with practical, well-coordinated solutions. I can review your requirements and available drawings to define the scope, deliverables, and technical approach. My focus is on accurate work, clear documentation, and responsive communication throughout the project. After reviewing the details, I can confirm a competitive fee and realistic delivery schedule. Please share your project files and requirements so we can discuss the next steps. Thanks, Erik
$555 USD in 5 days
0.0
0.0

Because the cabin is already built, the retrofit must be based on actual support locations and field conditions, not only the original cabin plans. I’d start by reviewing the cabin PDF, parcel information, photos, dimensions, and existing foundation layout, then identify any measurements or site documentation needed before design begins. From there, I’d develop a practical foundation solution addressing frost depth, allowable soil bearing, and applicable Elko County snow, wind, and seismic loads. The permit package would be coordinated so the drawings, details, and calculations align, reducing review comments and field confusion. I’m a licensed P.E. with 12+ years of experience. Nevada sealing eligibility would be confirmed before committing to the stamped submittal. Send the cabin plans and parcel details, and I’ll outline the information needed for a defined fee and schedule. Best regards,
$250 USD in 3 days
0.0
0.0

Hi, I am a licensed engineer with experience in structural design, foundation engineering, load calculations, and permit documentation, and I can help evaluate the existing 12' × 20' cabin and develop a foundation retrofit design. I’ll review your cabin plans, construction details, foundation photographs, and available site information to determine the appropriate retrofit or replacement foundation system, accounting for soil-bearing capacity, frost depth, snow loads, wind loads, and seismic requirements. I can prepare structural drawings, foundation details, supporting calculations, and a coordinated permit submission package based on the applicable Elko County requirements. Since the project specifically requires a Nevada-licensed PE seal, I would first need to confirm authorization to provide the required Nevada professional services or coordinate with an appropriately licensed Nevada PE for final review and sealing. Best regards, Justin
$500 USD in 2 days
0.0
0.0

Sandy, United States
Member since Oct 30, 2026
$750-1500 USD
$25-50 CAD / hour
$10-30 USD
₹12500-37500 INR
$5000-10000 AUD
$3000-5000 USD
$30-250 USD
€30-250 EUR
min $50 USD / hour
$250-750 AUD
$2-8 USD / hour
$150-200 USD
₹18000 INR
$10000-20000 USD
₹1500-12500 INR
$250-750 AUD
$30-250 USD
$10-40 USD
$250-750 USD
₹400-750 INR / hour