Develop an embedded software for stm32l4 microcontroller connected to a cellular module SIM808 to connect to internet and get the GPS position information.
The software project must be developed on Keil uVision5 or System Workbench for STM32. And most be based on the X-CUBE-AWS from STMicroelectronics.
The final objective of the project is to send the position information of the device to Amazon AWS Cloud IoT server using MQTT protocol. The connection must be done via the cellular network using the SIM808 (SIMCOM) module. The data must be published to a topic that should be specify in a mqtt setup file, along with the device unique ID, server address. And a separate file with the security certificates (an example file will be provided).
The device also will use the shadow service to send and receive the sample time for the readings in seconds on the range from 30s up to 3600s, and send the GPS satellite signal information, the cellular signal level, and battery level (obtained from the microcontroller ADC connected to the output of a resistive voltage divider that is connected to the system battery).
The configuration for the cellular APN should be done automatically by retrieving the network configuration or using a command shell that connects using the virtual serial port over the USB port of the microcontroller. The parameters should be store on the microcontroller flash memory.
For debugging a UART port will be used as is configured in X-CUBE-AWS.
When the device is not getting the GPS data and is not communicating with the AWS-iot, the cellular module must be turn off and the microcontroller most go to stop mode and the RTC signal will make it run again when the sample time is meet.
The RTC date and time must be set using SNTP.
The peripheric configuration must be done using the STMicroelectronics X-Cube-Mx software and the corresponding. ioc file must be included on the project files. Also, al the microcontroller peripheric must be controlled only by the X-CUBE HAL drivers.
Dear Employer, your project sounds interesting for me, so hereby I offer my sw development services to cooperate with you and help your project. Relevant Skills and Experience I have 9 years experience of h Daha Fazla
Bu iş için 8 freelancer ortalamada $283 teklif veriyor
Already done such projects with MQTT , JSON and different clouds. lets talk to us and consider job is done for you. Relevant Skills and Experience Looking forward to talk to you. Proposed Milestones $250 USD - proj Daha Fazla
Hi, sir I’m fully expert embedded developer 10+ years experiences. I have already developed a project almost same as your project I sent position data to AWS combining stm32f407, SIM808 and ESP8266 Relevant Skil Daha Fazla
Your Project will be done using : - CooCox CoIDE - STMCubeMX code generator - X-CUBE-AWS Expansion for STMCubeMX - STM32L4 series Or STM32F4 Series - SIM808 GSM/GPRS AND GPS Module Steps: - I will use STMcubeM Daha Fazla
Good experience in c and emebedded development Will provide excellent documentation and support
I can write software for STM32 MCU + SIM808. I going to test and debug it on my equipment. Also I will provide you with circuit diagram of a device. The [login to view URL] description is required. Relevant Skills and Exper Daha Fazla