Tamamlanmış

Design for Manufacture: hand held game housing for PCB

This project involves creating a full housing design with components (6 buttons and one battery cover) based on earlier sketches and some CAD to house the electronic chip (already made) for a hand held game. Therefore the final design will be two halves along with button inserts and covers for one electronic chip (see picture)

The design must be done for injection molding with appropriate tolerances and easy assembly including fastener system with little or no screws, buttons and corresponding slots, over molding and a molded in battery holder with cover. All files should be done preferably in solidworks.

Pictures and dimensions of the chip as well as jpgs and any rough solid models will all be sent for guidance.

The designer must have experience in:

- Design for manufacture

- Injection Molding Design - ABS Plastic

- Electronic Housing Design

- Tolerances

The final design should use minimal material while still being strong and durable with easy assembly method.

Beceriler: CAD/CAM, Üretim Tasarımı, Makine Mühendisliği, Ürün Tasarımı, Solidworks

Daha fazlasını gör: cad housing game, electronic housing design, still design, solidworks experience, solidworks cam design, solid designer cad, method models, method design, house design cad, design for cover, designer solidworks, designer electronic, design a house game, covers design , components design, cam design, cam cad design, cad pcb design, cad cam design, button material design, design electronic housing, pcb cad design, cad house design, Solid Design , slots game design

İşveren Hakkında:
( 37 değerlendirme ) New Orleans, United States

Proje NO: #761036

Seçilen:

michelemanzo

I'm perfect for this project. Please check your Inbox for my portfolio and skills.

%selectedBids___i_period_sub_7% gün içinde 150%project_currencyDetails_sign_sub_9% %project_currencyDetails_code_sub_10%
(1 Yorum)
2.4

Bu iş için 31 freelancer ortalamada $233 teklif veriyor

udayd75

pls check my pm

in %bids___i_period_sub_35% gün içinde250%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(122 Değerlendirme)
7.3
mark3design

Please check PM

in %bids___i_period_sub_35% gün içinde400%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(7 Değerlendirme)
5.2
antoniomeze

Interested in your project. I am new to tolerances for manufacturing issues as I was saying. But willing to learn.

in %bids___i_period_sub_35% gün içinde400%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(14 Değerlendirme)
5.5
bchandra1955

I can do this design, and give you one sample fabricated in ABS plastic. SEE MB. Brajesh

in %bids___i_period_sub_35% gün içinde225%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(50 Değerlendirme)
5.9
JackTCDavis

Hi, I am a Los Angeles based mechanical designer. I work full time for NASA on the Mars Rover but pick up freelance gigs on the side. I have done extensive previous jobs that required injection molding as can be see Daha Fazla

in %bids___i_period_sub_35% gün içinde350%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(6 Değerlendirme)
4.5
caddesignguru

We are interested in this project. Please see PMB.

in %bids___i_period_sub_35% gün içinde240%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(4 Değerlendirme)
4.6
nenad76

Please, check your PM for details!

in %bids___i_period_sub_35% gün içinde250%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(2 Değerlendirme)
3.9
nikserer

Hello, I have good experience with this type of project. Take a look at samples I will send you via PM. Thanks, Nikola!

in %bids___i_period_sub_35% gün içinde250%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(5 Değerlendirme)
3.5
Mzafaraamir

PMB Please

in %bids___i_period_sub_35% gün içinde250%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(6 Değerlendirme)
3.4
iSergii

Hello. See PM please..

in %bids___i_period_sub_35% gün içinde400%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(1 Yorum)
3.2
i2rdesign

Hi we are an experience design team and can do this for you,..Check out our details at [login to view URL] Best Regards Suresh.C

in %bids___i_period_sub_35% gün içinde350%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(1 Yorum)
2.9
dezignsolutions

Hi I am an experienced Plastic Product designer with over 8yrs of experience in Product design. I can do this for you.

in %bids___i_period_sub_35% gün içinde250%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(2 Değerlendirme)
2.8
solidacad2010

Hi Sir, Good day! Please check PM. Thanks!

in %bids___i_period_sub_35% gün içinde200%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(4 Değerlendirme)
2.1
anounaki

I am an experienced Plastic Product designer

in %bids___i_period_sub_35% gün içinde200%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(0 Değerlendirme)
0.0
CAGETOOLS

Hello sir, We are interested in your project we have quoted only for product design not for tool design. We can provide both 2D as well as 3D model of the design with complete tolerance.

in %bids___i_period_sub_35% gün içinde100%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(0 Değerlendirme)
0.0
josephjoyce

Hello, We have complete project experience to take the project from concept to completed (shipped) product. We can easily develop the prints for the plastic molded housing and battery cover. We can design/source bat Daha Fazla

in %bids___i_period_sub_35% gün içinde200%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(0 Değerlendirme)
0.0
SGrynko

Proficient in SolidWorks and injection molding parts design. Bidding low because I don't have a reputation on this website, not because I intend to deliver low quality.

in %bids___i_period_sub_35% gün içinde100%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(0 Değerlendirme)
0.0
Technocadd

We have experience of 4 years in creating enclosure using Solidworks. We are ready to do the work.

in %bids___i_period_sub_35% gün içinde180%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(0 Değerlendirme)
0.0
manuelbenjo

20 days will be on an average of 2 hours per day work

in %bids___i_period_sub_35% gün içinde250%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(0 Değerlendirme)
0.0
milten2004

I am college lecturer with more than 10 years working experience in Mechanical engineering. Pls check PM ...

in %bids___i_period_sub_35% gün içinde180%project_currencyDetails_sign_sub_37% %project_currencyDetails_code_sub_38%
(0 Değerlendirme)
0.0