Gas controller automation, system will have a pressure regulator with 2-6 pressure sensors. A solenoid and a dispensing hose. System will require rfid and to recognize tags. The system will also have a verification of pressure within the hose and will fill as long as the verification of volume equals or exceeds a pre entered pressure to verify from. The system will have stop points for pressure and when pressure drops to a certain point within the system it will pressurize to the stop point. The fill hose arrangement will turn off or not activate if it doesnt identify the programmed pressure at the a connection has been made. There will be multiple entries to provide a notification in the system should various events that occur that are not suposed to happen. A message may show as what caused the failure. The messages that me shown on the screen are a filling status with graphic. Also a graphic in the HMI to show remaining gas in the gas cylinder. There may be a chart showing the fill status as its filling. On The HMI there may be 6-9 buttons to fill a particular container. This may include a graphic of the canister. Features include a password to authorize use and System would function to fill automatically by RFID and verifying pressure in fill hose. If pressure is in range it will fill the canister. otherwise a message would indicate a particular problem. In addition while the system if filling if the fill is approved and fills and notices that the fill pattern doesnt match a normal fill in time the system will shut off . There will be a main screen with a cylinder graphic, a graphic of a container. There also may be a bar code scanner within the system.
This programming is to be done on a Unitronics PLC HMI
Bu iş için 20 freelancer ortalamada $601 teklif veriyor
Hello Sir, I'm interested to do this job. I understand your requirement. I also have experience in Unitronics PLC & HMI.
I have real extensive experience and I have already done this type of work here as well, I know how to handle work remotely.
Professional control domain engineer here Relevant Skills and Experience PLC programming
I am an electrical engineering graduate having experience in siemens and omron PLC programming.
I have two years experience in plc programming. Relevant Skills and Experience Knowledgeable in industrial automation
Dear Sir, I would like to contribute in your PLC project. I am an experiences automation programmer, with long exposure to Siemens platform (Simatic Manager, TIA Portal and WinCC). Although I'm not familiar with U Daha Fazla
I am expert in Automation and worked on Unitronics PLC. Relevant Skills and Experience I can design, develope and commission the System within Time limit.
Hi, I am Burak Maleri. I have 10 years plc and scada experience. I have been involved in major projects in Turkey (Osman Gazi Bridge etc.). I am particularly experienced in process and machine automation. You can see s Daha Fazla
Over 25 years of Automation and Control Systems Engineering Plus safety system training plus hazardous area training You seem to have a good understanding of what you want done - which makes my job much easier. Daha Fazla
I have completed my MS in Electrical Engineering and working in the field of designing for last 3 years. My projects have won more then 10 national level competitions. Area of Expertise -Discrete Time Signal Processing Daha Fazla