
Kapalı
İlan edilme:
Teslimde ödenir
Assessment Objectives Part 1: Build the Network Part 2: Configure Initial Device Settings Part 3: Configure Network Infrastructure Settings (VLANs, Trunking, EtherChannel) Part 4: Configure Host Support Introduction In this Packet Tracer Final Project, you will configure the devices in a small network. You must configure a router, two switches, and two PCs to support both IPv4 and IPv6 connectivity. Your router and switches must also be managed securely. You will configure inter-VLAN routing, DHCP, Etherchannel, and port-security. All of your tasks will be performed in PT Physical Mode. You will not be able to access the logical topology for this assessment. Network devices must be configured from a direct console connection. Instructions Part 1: Build the Network a. Move the required devices into the equipment rack. b. Place the PCs on the table. c. Connect the devices according to the topology diagram. Part 2: Configure Initial Device Settings All IOS device configuration must be made through direct console connections. Step 1: Configure R1 Basic Settings and Device Hardening a. Configure basic settings. 1) Prevent the router from attempting to resolve incorrectly entered commands as domain names. 2) Configure the R1 hostname. 3) Configure an appropriate MOTD banner. b. Configure password security. 1) Configure the console password and enable connections. 2) Configure an enable secret password. 3) Encrypt all clear text passwords. 4) Set the minimum length of newly created passwords to 10 characters. c. Configure SSH. 1) Create an administrative user in the local user database. Username: admin Encrypted Password: admin1pass 2) Configure the domain name as [login to view URL] 3) Create an RSA crypto key with a modulus of 1024 bits. 4) Ensure that more secure version of SSH will be used. 5) Configure the vty lines to authenticate logins against the local user database. 6) Configure the vty lines to only accept connections over SSH. Step 2: Configure router interfaces. a. Configure R1 with a loopback interface. Configure the loopback0 with IPv4 and IPv6 addressing according to the addressing table. b. Configure Router Subinterfaces 1) Prepare the router to be configured with IPv6 addresses on its interfaces. 2) Use the information in the Addressing Table and VLAN Table to configure subinterfaces on R1: Interfaces should be configured with IPv4 and IPv6 addressing. All addressed interfaces should use fe80::1 as the link local address. Use the VLAN table to assign VLAN membership to the subinterfaces. 3) Be sure to configure the native VLAN interface. 4) Configure descriptions for all interfaces. Step 3: Configure S1 and S2 with Basic Settings and Device Hardening. Configuration tasks for the switches S1 and S2 include the following: a. Configure Basic Settings on S1 and S2 1) Prevent the switches from attempting to resolve incorrectly entered commands as domain [login to view URL] 2) Configure the S1 or S2 hostname. 3) Configure an appropriate MOTD banner on both switches. b. Configure Device Hardening on S1 and S2 1) Configure the console password and enable connections. 2) Configure an enable secret password. 3) Encrypt all clear text passwords. c. Configure SSH on S1 and S2 1) Create an administrative user in the local user database. Username: admin Password: admin1pass 2) Configure the domain name as [login to view URL] 3) Create an RSA crypto key with a modulus of 1024 bits. 4) Ensure that more secure version of SSH will be used. 5) Configure the vty lines to authenticate logins against the local user database. 6) Configure the vty lines to accept connections over SSH only. Step 4: Configure SVIs on S1 and S2 Configure the SVI on both switches. a. Use the information in the Addressing Table to configure SVIs on S1 and S2 for the Management VLAN. b. Configure the switch so that the SVI can be reached from other networks over the Management VLAN. Part 3: Configure Network Infrastructure Settings (VLANs, Trunking, EtherChannel) On S1 and S2, Configure the following. Step 1: Configure VLANs and Trunking. a. Create the VLANs according to the VLAN table. b. Create 802.1Q VLAN trunks on ports F0/1 and F0/2. On S1, F0/5 should also be configured as a trunk. Use VLAN 6 as the native VLAN. Step 2: Configure Etherchannel. Create Layer 2 EtherChannel port group 1 that uses interfaces F0/1 and F0/2 on S1 and S2. Both ends of the channel should negotiate the LACP link. Step 3: Configure Switchports. a. On S1, configure the port that is connected to the host with static access mode in VLAN 2. b. On S2, configure the port that is connected to the host with static access mode in VLAN 3. c. Configure port security on the S1 and S2 active access ports to accept only three learned MAC addresses. d. Assign all unused switch ports to VLAN 5 on both switches and shut down the ports. e. Configure a description on the unused ports that is relevant to their status. Part 4: Configure Host Support Step 1: Configure Default Routing on R1 a. Configure an IPv4 default route that uses the Lo0 interface as the exit interface. b. Configure an IPv6 default route that uses the Lo0 interface as the exit interface. Step 2: Configure IPv4 DHCP for VLAN 2 a. On R1, create a DHCP pool called CCNA-A that consists of the last 10 host addresses in the VLAN 2 subnet only. b. Configure the correct default gateway address in the pool. c. Configure the domain name of ccna-a.net. Step 3: Configure IPv4 DHCP for VLAN 3 a. On R1, create a DHCP pool called CCNA-B that consists of the last 10 host addresses in the VLAN 3 subnet only. b. Configure the correct default gateway address in the pool. c. Configure the domain name of ccna-b.net. Step 4: Configure host computers. a. Configure the host computers to use DHCP for IPv4 addressing. b. Statically assign the IPv6 GUA and default gateway addresses using the values in the Addressing Table.
Proje No: 40054702
19 teklifler
Uzaktan proje
Son aktiviteden bu yana geçen zaman 2 ay önce
Bütçenizi ve zaman çerçevenizi belirleyin
Çalışmanız için ödeme alın
Teklifinizin ana hatlarını belirleyin
Kaydolmak ve işlere teklif vermek ücretsizdir
19 freelancer bu proje için ortalama $144 USD teklif veriyor

As a seasoned IT professional with extensive experience handling router configuration projects, I am confident in my ability to deliver top-notch results for your network setup task. Over the course of my 10-year career, I've worked with a variety of network devices including those from Cisco and have specialized in configuring not just IPv4 but also IPv6 connectivity with inter-VLAN routing, DHCP, Etherchannel, and port-security - all of which are central to this project. Additionally, I'm well-versed in implementing secure network management systems which will be crucial in maintaining the integrity of your router and switches. My deep understanding of encryption techniques, like RSA crypto key generation, matched with the ability to configure SSH to only accept connections over SSH will be invaluable for this project. Moreover, I actively stay updated with industry best practices regardless of whether it's related to Network Administration or Network Security. By leveraging this knowledge along with my commitment to ensuring optimal project delivery; I can guarantee a secure and well-managed network for you. Let's get started on ensuring your network works flawlessly!
$150 USD 3 gün içinde
7,1
7,1

Hi there, I am networking expert specialist and consultant for more than 11 years, who spend my free time to learn about new technologies in networking, security field to be always up to date. please just ping me on chat to have a short discussion on your project i will always look for solving your tasks ickly. below is a brief on my experience: Technology Specialist: --------------------- - Can design, implment large scale networking and make exaplanation reports. - Practice on Cisco Packet Tracer, GNS-3, EVE-NG. - Excellent pracitce on VMware WorkStation, Virtual-Box - VPN (IPSEC,IKE v1 or v2 ,L2TP ,OPENVPN, DUO Authentication). - Routing Protocols (BGP, OSPF, EIGRP .. ). - Wrie Technical Reports with excellent and format. Skills and Hands on Experience: ------------------------------- - Cisco devices (routers, switches), routing protocols, IPSEC, Cisco ASA Firewall. - Fortinet Devices: FortiGate, Forti Manager, Forti Analyzer. - wireless (WLC, Access Points): CISCO, Aruba, ubiquiti. - Juniper (M7, M10, MX 480, MX 960) and SRX (300, 500). - Operating Systems: Linux servers (Ubuntu, RedHAT, Debian), windows (Windows server 2012, 2016 ..etc). Regards, Ramy
$140 USD 3 gün içinde
6,0
6,0

Hi, as a computer science professional with over five years of experience, including CCNA certification, network administration and security have become second nature to me. My expertise in Router Configuration has been tested and proven on various complex projects such as what you've laid out here. I am intimately familiar with VLANs, Trunking, EtherChannel configurations and inter-VLAN routing tasks - all of which are critical to your project success. In addition to my technical skills, my deep understanding of Project Management will assure that your project is not only completed on time but also excels in quality with little room for error. I pride myself on being time-conscious and punctual, as any delays in project deadlines can also lead to increased cost for my clients. Your project description falls squarely within my areas of expertise and I am eager to get started. Rest assured, if hired, I will make every effort to deliver your desired results efficiently and professionally. Your satisfaction is my primary concern and I look forward to exceeding all your expectations in the successful completion of this project. Thank you for considering me for the job.
$140 USD 7 gün içinde
5,9
5,9

Hi there! I’m a network engineer managing complex campus topologies, and I can complete your Packet Tracer project in Physical Mode: secure router/switch setup, IPv4/IPv6, inter-VLAN routing, DHCP, EtherChannel, and port-security via console. Happy to handle it cleanly.
$200 USD 3 gün içinde
4,4
4,4

I am a skilled System Admin with expertise in Computer Security, Cisco, Network Administration, and Network Security. My experience aligns perfectly with the Router Configuration Expert Needed project requirements. I am confident in my ability to deliver high-quality results. I am open to adjusting the budget after discussing the full scope. My priority is to complete the project efficiently and within your budget. I am eager to start and showcase my dedication to your project. Please review my 15-year-old profile to see my extensive experience. Let's discuss the details and get started on this project.
$175 USD 7 gün içinde
4,1
4,1

As an experienced network specialist with in-depth knowledge of Cisco systems, I believe I am the ideal choice to fulfill your router configuration project. Over the years, I have honed my skills in various components crucial to this task, including build networks, configuring initial device settings, and managing network infrastructure. My expertise extends to inter-VLAN routing, DHCP management, Etherchannel utilization, and even port-security - all critical aspects of achieving a high-performing security-conscious network you desire. In leading SoftwareLinkers company, we have developed robust software solutions for educational institutions, enterprises and government agencies, emphasizing the need for efficient and secure networks. With these prior experiences in hardening device security through console connections, configuring SSH settings and RSA crypto keys for secure access, we are adaptable to the task at hand ensuring its completion deftly while adhering to global network security best practices. Moreover, I understand that your network management requirements demand a reliable professional who possesses not only deep technical expertise but also an approachable demeanor that fosters collaboration. With my excellent communications skills, I promise regular updates throughout the duration of the project) until completion.
$250 USD 8 gün içinde
3,1
3,1

Hi there, I am excited to help you with your Packet Tracer network configuration project! With extensive experience in network design and implementation, I understand the critical elements of building and securing a network infrastructure. I will meticulously set up the routers, switches, and PCs as per your specifications, ensuring seamless IPv4 and IPv6 connectivity. From configuring device settings and implementing VLANs to ensuring secure SSH configurations, I will handle each task methodically, following your outlined steps for device hardening and routing. My approach includes rigorous testing to confirm every component operates as intended. We can begin promptly and aim for a three to five-day turnaround time to cover all configurations thoroughly. Thanks,
$90 USD 3 gün içinde
2,6
2,6

Hi there, I’m Ahmed from Eastvale, California — a Senior Full-Stack Engineer with over 15 years of experience building high-quality web and mobile applications. After reviewing your job posting, I’m confident that my background and skill set make me an excellent fit for your project — Router Configuration Expert Needed . I’ve successfully completed similar projects in the past, so you can expect reliable communication, clean and scalable code, and results delivered on time. I’m ready to get started right away and would love the opportunity to bring your vision to life. Looking forward to working with you. Best regards, Ahmed Hassan
$120 USD 2 gün içinde
0,0
0,0

⭐Hi, I’m ready to assist you right away!⭐ I believe I’d be a great fit for your project since I have extensive experience in network security, Cisco devices, computer security, network administration, and system administration. With this project, I can ensure the secure configuration of routers, switches, and PCs to support both IPv4 and IPv6 connectivity, while implementing essential features like inter-VLAN routing, DHCP, Etherchannel, and port-security. This project aligns perfectly with my technical expertise and practical experience, making me well-equipped to tackle your network configuration needs efficiently and effectively. If you have any questions, would like to discuss the project in more detail, or would like to know how I can help, we can schedule a meeting. Thank you. Maxim
$50 USD 6 gün içinde
0,0
0,0

• Ability to setup and install servers and workstations. • Receives, troubleshoots, resolves, assigns and tracks problems. • Experience in assisting users with software/hardware problems. • Good knowledge in Dial-up networking, DSL, routers and switches. • Good knowledge in Lan network configurations and networking protocols: TCP/IP.
$140 USD 7 gün içinde
0,0
0,0

I am ready to complete your Packet Tracer assessment thoroughly and accurately based on all requirements. I have hands-on experience configuring Cisco routers and switches, including VLANs, trunking, EtherChannel, IPv4/IPv6, DHCP, secure device management, and port-security. What I will deliver: • Build the full physical topology (rack devices + hosts) exactly as shown. • Configure R1, S1, and S2 with proper basic settings and device-hardening (no DNS lookup, MOTD banner, secure passwords, encryption, and SSH v2). • Configure router subinterfaces with dual-stack IPv4/IPv6, correct link-local addressing, and inter-VLAN routing. • Set up switch SVIs for management VLAN and ensure remote accessibility. • Create all required VLANs, 802.1Q trunks with native VLAN 6, and LACP EtherChannel. • Configure access ports, port security (3 MAC limit), assign unused ports to VLAN 5, and shut them down. • Set up IPv4 DHCP pools for VLAN 2 and VLAN 3 with correct gateway and domain. • Configure host PCs with DHCP (IPv4) and static IPv6 based on the addressing table. • Provide clean, error-free configuration and documentation. I work precisely, follow technical instructions strictly, and can complete the full project efficiently. I’m ready to start immediately.
$100 USD 7 gün içinde
0,0
0,0

I am ready to complete the Packet Tracer final project by configuring a router, two switches, and two PCs for both IPv4 and IPv6 connectivity. I have experience in VLANs, inter-VLAN routing, DHCP, EtherChannel, trunking, port-security, and SSH configuration. I will ensure all devices are securely configured, SVIs are set correctly, and hosts can communicate as required, delivering a fully functional and properly managed network.
$100 USD 4 gün içinde
0,0
0,0

Donna, United States
Ödeme yöntemi onaylandı
Ara 11, 2025 tarihinden bu yana üye
$15-25 USD / saat
$30-250 USD
$35-45 USD / saat
€250-400 EUR
$25-50 USD / saat
₹1500-12500 INR
minimum $50 USD / saat
£18-36 GBP / saat
$30-250 USD
₹600-1500 INR
$30-250 USD
$30-250 USD
$250-750 NZD
$30-250 AUD
€750-1500 EUR
₹1250-2500 INR / saat
₹600-1500 INR
$30-250 USD
$250-750 USD
$250-750 USD