
Closed
Posted
Paid on delivery
I have a raised-floor data center layout that needs a rapid Computational Fluid Dynamics study focused solely on airflow distribution. The goal is to validate my current design, spot any recirculation or dead zones, and receive clear, actionable recommendations that I can implement immediately. Scope • Build or refine the CFD model from my drawings (floor plan, rack elevations, CRAC positions, tile perforation details). • Run steady-state simulations that capture supply plenum behavior, under-floor paths, and above-rack flow patterns. • Compare predicted rack inlet temperatures and pressures against ASHRAE guidelines. • Provide visualizations—contour plots, velocity vectors, temperature maps—and a concise engineering report explaining findings and fixes. Tools ANSYS Fluent Timing 2 -3 Weeks Deliverables 1. Original solver files and geometry. 2. Exported plots and animations (PNG/MP4). 3. Written report summarizing methodology, key metrics, and recommended design tweaks. I will be available for quick feedback cycles so we can lock this down without delay.
Project ID: 40778370
66 proposals
Remote project
Active 14 hours ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
66 freelancers are bidding on average $462 USD for this job

Hello, I am a design engineer, I am expert in CFD analysis using Ansys so i can do the required analysis in the required time. I have finished similar projects before and finished 600+ projects. Please check my portfolio and reviews. Thanks.
$500 USD in 7 days
8.3
8.3

Hi, Your raised-floor arrangement needs the supply plenum and rack aisles treated as one airflow system. I can build the ANSYS Fluent model from the floor plan, rack elevations, CRAC data and tile details, representing perforated tiles with appropriate resistance and capturing under-floor obstructions, bypass flow and recirculation. For the requested inlet-temperature maps, I would include rack heat loads and supply temperatures. The report would distinguish the applicable ASHRAE rack-inlet temperature guidance from pressure/airflow performance, and document the equipment class and operating assumptions used. I would check mesh sensitivity, residuals, flow/energy balance and rack-inlet monitors before comparing the baseline with one agreed improvement. Delivery includes geometry, Fluent case/data files, annotated contours/vectors, a short flow animation and a concise report with specific layout or tile-distribution recommendations. My offer is $480 for the agreed room model, baseline and one improvement case, targeting 5 days after complete inputs and model extent are confirmed. Please confirm rack count and room size before award so we can lock the scope. Best regards, Gökay
$480 USD in 5 days
6.8
6.8

Hi there, I can help with CFD analysis and cooling optimization for your data center using ANSYS Fluent. I have 7+ years of CAE experience, specializing in fluid flow, heat transfer, thermal management, and CFD optimization. I can analyze airflow distribution, temperature hotspots, rack cooling performance, and pressure distribution to identify cooling improvements. Deliverables can include simulation results, temperature and velocity contours, and a detailed technical report. Timeline and budget can be finalized after discussing the complete scope. Could you share the data center layout, rack configuration, and cooling system details? Best regards, Arati M.
$500 USD in 7 days
6.7
6.7

Hello, I can send you some of my report related to CFD data centr cooling, and some other similar CFD&Thermal simulaitons. Feel free to contact me and ask me additional questions.
$500 USD in 7 days
6.1
6.1

Hello, Proper airflow distribution in a raised-floor data center is essential for preventing hot spots, avoiding recirculation, and ensuring efficient server cooling. With my experience in CFD and thermal simulations using ANSYS Fluent, I can analyze your design, identify airflow issues, evaluate rack inlet conditions against ASHRAE guidelines, and provide practical recommendations. I will deliver the simulation files, geometry, visualizations, and a concise engineering report within your a 1-2 week timeframe. Best regards, Dr. Hammana
$500 USD in 7 days
6.2
6.2

Hi, I can assess your raised-floor data center in ANSYS Fluent and identify practical changes to improve rack airflow, reduce recirculation, and eliminate poorly supplied areas. I’m a mechanical engineer with HVAC design and CFD experience supporting Australian consulting projects. My work includes equipment-room ventilation, air-conditioning distribution, and condenser recirculation studies, combining simulation results with practical design recommendations. For your study, I will: • Build the model from your drawings, including the supply plenum, under-floor obstructions, racks, CRAC units, and perforated tiles. • Represent tile pressure losses and rack airflow/heat loads using the available equipment data. • Run steady-state airflow and thermal simulations, checking convergence, mass balance, and mesh sensitivity. • Evaluate rack inlet temperatures against applicable ASHRAE guidance and assess plenum pressure, airflow delivery, bypass, and recirculation. • Recommend targeted adjustments to tile placement, airflow balancing, containment, or CRAC settings. You’ll receive editable geometry and Fluent files, PNG plots, MP4 flow visualizations, and a concise engineering report. I can work within your 2–3 week timeframe, subject to reviewing the model size and inputs. Please share the drawings, rack loads/airflows, CRAC operating data, and tile specifications. Best regards, Osama Elsaman
$600 USD in 7 days
5.4
5.4

Hello, I have experience with CFD analysis for thermal management and airflow distribution, including supply plenum behavior, underfloor pressure variation, rack inlet conditions, and airflow recirculation in data center environments. My technical background includes interpreting velocity fields, temperature contours, pressure gradients, and flow separation to identify cooling inefficiencies and potential hotspots. I can develop or refine your ANSYS Fluent model from the supplied drawings, run steady-state simulations, and evaluate rack inlet conditions against applicable ASHRAE guidance. You’ll receive the solver files, geometry, clear visualizations, and a concise engineering report with practical recommendations for improving airflow distribution within your 2 to 3 week timeframe. Here is my past work. https://www.freelancer.com/u/lukesanthony Regards
$250 USD in 7 days
5.1
5.1

Hi there, I can help assess your raised-floor data center design through a focused CFD study using ANSYS Fluent, with the goal of identifying airflow imbalances, recirculation, and poorly ventilated zones and providing practical recommendations. Scope of Work Build or refine the CFD geometry using your floor plans, rack elevations, CRAC locations, and perforated tile details. Set up steady-state simulations to evaluate underfloor supply airflow, plenum distribution, and above-rack airflow patterns. Analyze rack inlet conditions, pressure distribution, airflow velocities, and potential hot spots, referencing applicable ASHRAE guidance. Prepare velocity vectors, contour plots, temperature maps, and animations where useful. Deliver the original solver files, geometry, exported visualizations, and a concise engineering report with actionable design recommendations. I can work with you through regular feedback cycles to refine assumptions and ensure the results address your current design concerns. Please share your drawings, equipment schedules, rack heat loads, CRAC airflow capacities, and perforated tile specifications so I can assess the model requirements and boundary conditions. Best Regards, Mohand
$500 USD in 7 days
5.1
5.1

I understand you need a rapid CFD study to validate your data center's airflow distribution and identify hot spots or dead zones, similar to how I've previously analyzed complex HVAC systems for optimal thermal performance. My expertise lies in quickly translating architectural layouts into accurate CFD models to deliver actionable insights. My approach involves building a robust CFD model using ANSYS Fluent, incorporating your provided CAD drawings and equipment specifications. I'll define realistic boundary conditions for supply and return air, then run steady-state simulations to analyze airflow velocity, pressure, and temperature distribution throughout the under-floor plenum and above the racks. The focus will be on identifying recirculation zones and ensuring uniform airflow to all IT equipment. To best address your specific needs, could you clarify the typical heat load density per rack, and what level of accuracy you require for the predicted rack inlet temperatures? I'm ready to discuss your project in detail and provide a precise timeline and quote.
$600 USD in 21 days
4.7
4.7

Hi, there! I have reviewed your project details carefully regarding the CFD airflow analysis of your raised-floor data center. I can help develop the 3D geometry from your floor plans, rack elevations, CRAC locations, and perforated tile specifications for simulation in ANSYS Fluent. The study will focus on airflow distribution, under-floor pressure behavior, rack inlet conditions, and identifying recirculation zones or areas with insufficient airflow. I can help prepare velocity vector plots, temperature contours, pressure distributions, and clear visualizations to support design evaluation. I will also help organize the findings into a concise engineering report with practical recommendations for improving cooling performance. I understand the importance of completing the work within your two-to-three-week timeline and maintaining quick feedback cycles. I would be happy to review your existing layout and simulation requirements to discuss the scope and deliverables.
$250 USD in 3 days
4.7
4.7

⚠️ If you're not happy, you don’t pay. ⚠️ Hi Client, Thank you for checking my proposal and sharing the detailed project brief. I can conduct a Computational Fluid Dynamics (CFD) study using ANSYS Fluent with a precise and actionable approach. I will deliver: • Refined CFD model based on your existing drawings • Steady-state simulations of supply plenum behavior and under-floor airflow • Comparison of rack inlet temperatures and pressures against ASHRAE guidelines • Visualizations including contour plots, velocity vectors, and temperature maps • Comprehensive engineering report with methodology, key metrics, and design recommendations You will also receive: • Original solver files and geometry • Exported visualizations in PNG/MP4 format I am confident I can execute your vision professionally and efficiently. Looking forward to discussing timeline and next steps. Best regards, Chirag Pipal
$400 USD in 14 days
4.2
4.2

My experience with advanced CFD simulations in ANSYS, combined with a mechanical engineering background, directly matches your data-center airflow study. I can work from your floor plans, rack elevations, CRAC locations, and perforated-tile details to develop or refine the geometry and assess airflow through the raised floor and rack areas. My background also includes engineering analysis, data visualization, and technical documentation, enabling me to present useful contour plots, velocity vectors, temperature maps, and exported animations—not just raw solver results. I can evaluate rack inlet conditions, identify recirculation or stagnant zones, and document practical design adjustments in a concise engineering report. I will also provide the original geometry and solver files alongside the visual deliverables. I am ready to apply my ANSYS CFD and engineering analysis skills to validate your current layout and deliver clear, actionable findings within your requested project timeframe.
$250 USD in 7 days
5.0
5.0

Are you looking for an experienced CFD specialist to validate your raised-floor data center design and identify airflow recirculation, hotspots, and dead zones? With over 12 years of experience in engineering design and simulation, I can help develop or refine your model in ANSYS Fluent using your floor plans, rack elevations, CRAC positions, and perforated tile details. I will perform steady-state CFD simulations to evaluate underfloor airflow, supply plenum pressure distribution, and above-rack flow patterns, then assess rack inlet temperatures and pressure distribution against applicable ASHRAE guidelines. You will receive clear contour plots, velocity vectors, temperature maps, and animations, along with the original solver files, geometry, and a concise engineering report outlining key findings and practical recommendations to improve cooling efficiency. I understand the importance of your 2–3 week deadline and will maintain efficient communication throughout the project to incorporate your feedback and keep the work on schedule. I am ready to review your drawings and help you achieve a reliable, well-validated data center airflow design.
$250 USD in 6 days
4.0
4.0

Hello, Your data center CFD study requires engineering analysis and Finite Element Analysis skills applied with precision to airflow behavior, rack conditions, and design validation. My technical writing experience also supports the concise engineering report you need, with findings presented clearly and recommendations tied to practical design improvements. I can support the preparation of professional technical documentation covering methodology, key metrics, visual results, recirculation or dead-zone observations, and actionable corrective suggestions. My background across engineering-related analysis, research reports, and technical writing enables me to communicate complex results in a form that is useful for immediate implementation, while keeping the required solver files, plots, animations, and report organized. Best regards Bharti
$250 USD in 3 days
4.5
4.5

Hi, I can help develop a detailed ANSYS Fluent CFD model of your raised-floor data center, focusing on airflow distribution, recirculation, pressure imbalances, and cooling performance. The best approach is to first review your floor plans, rack elevations, CRAC locations, perforated tile specifications, and cooling conditions. I'll then build the CFD geometry, define appropriate boundary conditions, generate a suitable mesh, and perform steady-state simulations to identify dead zones and inefficient airflow paths. I'll also assess rack inlet temperatures against ASHRAE recommendations, using actual rack heat loads and cooling supply conditions. Deliverables will include: - Complete ANSYS Fluent model and geometry - Raised-floor plenum airflow simulation - Velocity and pressure distribution analysis - Rack inlet temperature assessment - Recirculation and dead-zone identification - Contour plots and velocity vectors - PNG visualizations and MP4 animations - Mesh and convergence verification - Practical airflow improvement recommendations - Concise engineering report I'll focus on accurate boundary conditions, traceable results, and actionable design changes rather than simply generating attractive CFD plots. My proposed fixed price is $250, with delivery in 1-2 weeks. Could you share your CAD drawings, CRAC airflow specifications, and rack heat-load data? Best regards Ankit
$250 USD in 7 days
3.5
3.5

Hi, Aashiq (Ash) here from Cape Town, South Africa. This project instantly caught my eye, so I had to reach out. I see you’re looking for a comprehensive CFD study to validate your raised-floor data center layout, focusing on airflow distribution and identifying any dead zones. That’s right up my alley. With extensive experience in CFD modeling using ANSYS Fluent, I've helped numerous businesses optimize their data center designs by ensuring efficient airflow and compliance with ASHRAE guidelines. I’m confident I can deliver the actionable insights you need. Feel free to ask for samples of similar projects I've completed. Based on what you mentioned, here is how we would approach the project: • Refine your existing CFD model from the provided drawings • Run steady-state simulations to analyze airflow patterns • Generate visualizations and a detailed report with recommendations You can count on clear communication throughout the process, ensuring a user-focused solution that’s optimized for performance. Best Regards, Aashiq
$700 USD in 14 days
3.6
3.6

Hello, Greetings , Good evening! I’ve carefully checked your requirements and really interested in this job. I’m a skillful mechanical engineer by using 3D CAD Software. I’m offering best quality and highest performance at lowest price. I can complete your project on time and your will experience great satisfaction with me. I’m well versed in Solidworks, AutoCAD, Finite Element Analysis, Engineering, Data Visualization, Mechanical Engineering, Thermal Analysis, Computational Fluid Dynamics and Technical Documentation and several 3D CAD Software. I have rich experienced in Industrial & Mechanical design. For more information about me, please refer to my portfolios. I’m ready to discuss your project and start immediately. Looking forward to hearing you back and discussing all details.. I await your immediate response
$250 USD in 2 days
3.3
3.3

Hello, I am a CFD Engineer experienced in airflow, thermal management, and HVAC performance, and proficiency in STAR-CCM+, OpenFOAM and ANSYS Fluent. Your project aligns closely with the type of simulations I regularly perform, particularly airflow distribution, ventilation effectiveness, and HVAC system optimization. As part of my recent work, I conducted CFD-based thermal analyses for data centers, including airflow management, cooling effectiveness assessment, temperature distribution, and HVAC optimization. I will share sample simulation results from this project for reference in messages. I would be happy to review the available 3D models, architectural/mechanical plans, and HVAC layouts, and discuss the project in more detail. Best regards, Walid Badawy CFD Engineer | Thermal Analyst
$750 USD in 18 days
3.1
3.1

HELLO DEAR FRIEND, I can help evaluate your raised-floor data center airflow using ANSYS Fluent, focusing on airflow distribution, rack inlet conditions, recirculation, and dead zones to support practical design improvements MY APPROACH I’ll build or refine the CFD geometry using your floor plans, rack elevations, CRAC locations, and perforated tile details. I’ll run steady-state simulations to assess under-floor pressure distribution, supply airflow paths, and above-rack circulation, then compare predicted rack inlet temperatures against applicable ASHRAE guidance. DELIVERABLES ANSYS Fluent solver files and model geometry Temperature contours and velocity-vector plots Pressure and airflow distribution visualizations PNG plots and MP4 animations Concise engineering report with findings and recommendations Actionable design improvements for airflow optimization I have 8 years of relevant engineering and CAD design experience, with a focus on technical modeling and engineering documentation. QUESTIONS Can you provide the existing layout, rack loads, and CRAC specifications? Do you have measured airflow or temperature data for validation? Are there specific ASHRAE criteria or inlet-temperature limits to meet? Best regards, Sidra https://www.freelancer.pk/u/sidratulm20
$250 USD in 3 days
2.8
2.8

Proposal: CFD Analysis of Raised-Floor Data Center Airflow Distribution Hello, I would be interested in helping you evaluate your raised-floor data center layout through a focused Computational Fluid Dynamics (CFD) study. I understand that your priority is to validate the existing design, identify airflow inefficiencies, and obtain practical recommendations that can be implemented without unnecessary redesign. Proposed Scope of Work 1. Geometry Preparation and Model Setup I would review your floor plans, rack elevations, CRAC locations, perforated tile specifications, and available equipment data. The geometry would be prepared or refined to capture the features that materially influence airflow distribution. The model would include the raised-floor supply plenum, relevant obstructions and under-floor flow paths, rack airflow demand, and above-rack circulation. 2. Boundary Conditions and Simulation I would establish the simulation inputs using the available equipment and operating data, including: CRAC supply airflow and temperature. Rack airflow requirements and heat loads. Perforated tile open area or measured airflow characteristics. Raised-floor height and significant under-floor obstructions. Room pressure conditions and return-air paths.
$500 USD in 5 days
2.7
2.7

Brooklyn, United States
Payment method verified
Member since Jul 20, 2010
$10-30 USD
$250-750 USD
$250-750 USD
$30-250 USD
$10-30 USD
₹12500-37500 INR
₹600-1500 INR
₹1500-12500 INR
₹600-1500 INR
$30-250 USD
₹12500-37500 INR
$750-1500 USD
₹12500-37500 INR
£750-1500 GBP
$8-15 USD / hour
$30-250 AUD
$300-500 USD
₹1500-12500 INR
$30-250 AUD
$750-1500 USD
$750-1500 USD
₹400-750 INR / hour
$250-750 USD
₹600-1500 INR
€250-750 EUR