Devam Ediyor

Circuit board layout using PADS PCB or Altium

I have a total of two new boards to be created using PADS PCB software. I have schematics created in Orcad v 16. It would be best if you are familiar with and have access to Orcad.

The boards are 4 layer, of moderate density, with dimensions of 75mm x 100mm (board #1) and 250mm x 100mm (board #2).

I have mechanical drawings of the boards (made in Solidworks) for you as part of the requirements. These two boards fit together as shown on the drawings.

The designer of these boards will be available to answer any questions on a quick-turn basis.

I will consider Altium as an acceptable layout tool if you have that instead of PADS. All of my other boards are already in PADS so I prefer PADS.

In the files section, I am uploading the schematics and mechanical drawings for the two boards.

Beceriler: Elektronik, PCB Düzen

Daha fazlasını görün: pads altium, altium pads, pads pcb altium, altium designer pads, pads layout altium, board layout pads, pads pcb, orcad pads, circuit board layout, altium pads layout, pads orcad altium, dimensions circuit altium, pcb layout using pads, orcad layout pads, solidworks pads pcb, layout using altium, pcb circuit board, orcad altium, solidworks mechanical designer, pads to orcad, orcad 4, mechanical designer solidworks, designer solidworks, designer electronics, circuit designer

İşveren Hakkında:
( 4 değerlendirme ) Foster City, United States

Proje NO: #709210

Seçilen:

jmatthews

I am a very experienced PADS user (15+ years). The time I list is the maximum the job would take. My quote is based on the data as presented.

5 gün içinde 750$ USD
(1 Değerlendirme)
3.8

41 freelancer bu iş için ortalamada 895$ teklif veriyor

ganduyantech

Please see PM

in 15 gün içinde1000$ USD
(7 Değerlendirme)
3.9
zszabo

Hi, Please see PM. Regards Zoltan

in 10 gün içinde1000$ USD
(2 Değerlendirme)
3.9
adipdutt

we will do it on PADS. Regards adipdutt

in 8 gün içinde850$ USD
(3 Değerlendirme)
3.0
amitj9

Hi, I have been working with Altium and Orcad tools since 14 years working in MNCs' like Barco and Mentor Graphics. I am also an expert in FPGA/CPLD design. Have designed complex boards from 2 layers to 12 layers Daha fazlası

in 45 gün içinde1000$ USD
(1 Değerlendirme)
2.4
sleek0

Hello, I am a PCB Designer for almost 4 years. I've done many projects, especially high-speed backplanes with EMI requirements. I use Altium Designer. I also have some beginner experience in PADS, but for this proje Daha fazlası

in 15 gün içinde900$ USD
(1 Değerlendirme)
2.0
nijaguna

we can do it ,please provide us the oppurtunity to work with you Thanks

in 15 gün içinde1000$ USD
(0 Değerlendirme)
0.0
ADIL79

i have more then 9 years experienced in pcb layout expert in altium p-cad portal allegro

in 26 gün içinde1000$ USD
(0 Değerlendirme)
0.0
sircam32

Hello,We have a team specialist on Home appliance/Industrial control/computer mother board. Either Mentor PADS or Cadence are avaliable. We can also provide you PCB sample board as well only for $100-$150 depends Daha fazlası

in 15 gün içinde750$ USD
(0 Değerlendirme)
0.0
iovcatalin

I have a lot of experience in PADS and OrCAD. It's awesome to have the chance of designing in PADS. As the schematic is already drawn in OrCAD, I'll use the translator in PADS to move it to Logic. I can't wait.

in 21 gün içinde1200$ USD
(0 Değerlendirme)
0.0
CAMexpert2001

Hi there. PCB Layout is my expertise. Analog/Digital, Mixed, high Speed, no problem. I would use OrCad and Altium to fulfill your project. Please let me know if you need more info. thx

in 15 gün içinde1000$ USD
(0 Değerlendirme)
0.0
engaesm

i'm electronic engineer, send me the files to see what can i do 4 u

in 7 gün içinde750$ USD
(0 Değerlendirme)
0.0
sinamdar3

Hello There. I can design the project using ORCAD LAYOUT. I cannot use PADS or Altium. If you are interested, please let me know. thanks.

in 30 gün içinde999$ USD
(0 Değerlendirme)
0.0
shanthi2485

I have done nearly 1500 boards in [url removed, login to view] can complete this project very well.

in 10 gün içinde750$ USD
(0 Değerlendirme)
0.0
mayank9283

Hi.. I can do it in your lowest Band. Design to be done in Cadence-Allegro. I hope, it will be no issue as Allegro is also intell. tool.

in 15 gün içinde750$ USD
(0 Değerlendirme)
0.0
apaszczak

Hello, I have experience with Altium, also I have access to PADS and Orcad. Boards would be developed in Altium Designer with consideration to EMC, if you are interested in my project please send me PM,

in 10 gün içinde800$ USD
(0 Değerlendirme)
0.0
Daulme

Hello, I am an experienced pcb designer with Pads and after looking at the schematic it appears to be a pretty straightforward project.

in 14 gün içinde750$ USD
(0 Değerlendirme)
0.0
crimper

Layout will be done in Altium. I've worked with importing designs from Orcad to Altium, and have access to both programs.

in 30 gün içinde800$ USD
(0 Değerlendirme)
0.0
naveen146

Hey there, Myself, Naveen I am having very good exposure in PCB, PPD and Circuit designing and layout designing. I have handson experience in ORCAD, ALTIUM and PADS. I am very much comfortable to take this wo Daha fazlası

in 7 gün içinde750$ USD
(0 Değerlendirme)
0.0
nitinsonar

I have 8 years of experience in hardware design with Orcad and PADS. Also have worked on Altium designer. I have schematic and PCB design of various projects as per the mechanical costrains. Hope should be good match Daha fazlası

in 7 gün içinde750$ USD
(0 Değerlendirme)
0.0
santhoshkn86

I have got very good experience in PCB [url removed, login to view] you can provide the schematic and all EMI EMC specifications I can start the work as early as possible

in 90 gün içinde750$ USD
(0 Değerlendirme)
0.0