Find Jobs
Hire Freelancers

Light up a LCD 320x240 with SSD2119 driver via STM32F100RB -- 2

€30-250 EUR

Tamamlandı
İlan edilme: 7 yıldan fazla önce

€30-250 EUR

Teslimde ödenir
Situation: This project (room thermostat with smart home functionality) was originally planned with usage of a LCD display 320x240 with the driver ILI9342, resistive touch panel controlled by ADC and temperature/humidity sensor I2C. There does exist already programming code of the initial product. Due to new requirements there is a need to use a LCD display 320x240 with the driver SSD2119, capacitive touch controlled by I2C and a new temperature/humidity sensor I2C. Used MCU is STM32F100RB and IDE is CooCox with GCC. Request of work to do: Adapt the existing source code to the new LCD with the driver SSD2119 including the new capacitive touch panel (basic function for temperature change) and the new temperature/humidity sensor. Existing hardware: A 3.5" LCD TFT display 320x240 with the driver SSD2119 connected to the mcu STM32F100RB. Requirement: Light up the LCD via programming in C with 16 Bit data bus, adaptation of exisitng code is required. CooCox IDE with GCC appreciated. Schematic of the mcu pinout and the original CooCox IDE project is going to be provided after nomination. Preferred languages: Russian, English and German Required expert knowledge: STM32 coding especially with TFT LCD This is the initial small coding job and further tasks will follow for the development of the final product.
Proje No: 12294283

Proje hakkında

13 teklif
Uzaktan proje
Son aktiviteden bu yana geçen zaman 7 yıl önce

Biraz para mı kazanmak istiyorsunuz?

Freelancer'da teklif vermenin faydaları

Bütçenizi ve zaman çerçevenizi belirleyin
Çalışmanız için ödeme alın
Teklifinizin ana hatlarını belirleyin
Kaydolmak ve işlere teklif vermek ücretsizdir
Seçilen:
Kullanıcı Avatarı
I understand you want to change the LCD for your project. This will require re-writing the low-level drivers for the display and touchscreen. I've worked with a lot of LCDs (you can see one of those projects in my portfolio) and I've also used STM32s and the STDPeriph library with Keil IDE for access control projects. I can easily switch to CooCox IDE though. I can code the needed drivers and help you switch LCDs so that your application remains exactly the same as before. I can also interface the STM32 with your new I2C sensor. Contact me to discuss details.
€167 EUR 10 gün içinde
5,0 (20 değerlendirme)
4,6
4,6
13 freelancers are bidding on average €158 EUR for this job
Kullanıcı Avatarı
FREELANCER RECOMMENDED ------------------------------------------------------ Can help... I am an Expert... Lets Start! Please start a Discussion with me and we can get started from there... Please check the past projects I have handled and check my reviews for what employers have to say about my work... Can start right now...
€100 EUR 10 gün içinde
5,0 (2 değerlendirme)
4,6
4,6
Kullanıcı Avatarı
Please review profile and let me know ...............................................................
€133 EUR 5 gün içinde
4,6 (6 değerlendirme)
3,6
3,6
Kullanıcı Avatarı
Hi, I am an experienced embedded SW developer, and I have worked with several STM32 microcontrollers working for companies and also as freelancer. I have integrated LCDs with UC1698 and SBN1661G, developing GUI with emWin library. - from one of my recent projects as a freelancer, I have a Nucleo-F103RB board, with MCU STM32F103RBT6, and I have also a board with STM32F207IG. However, it would be recommended to have the same platform for development. Are you providing a complete prototype? I don't know if I could easily get an LCD with SSD2119 by myself. - how is the touch controller interfaced? Does it operate as a slave with a dedicated line for interrupt? - For ST microcontrollers I have always worked with Keil and TrueStudio, but I would have no problem on doing it with CooCox since it is free Regards.
€155 EUR 7 gün içinde
5,0 (2 değerlendirme)
3,5
3,5
Kullanıcı Avatarı
A proposal has not yet been provided
€200 EUR 20 gün içinde
5,0 (2 değerlendirme)
2,7
2,7
Kullanıcı Avatarı
(((((((((((((((( i can help you very low price Chat me now please now )))))))))))))))))) *************************************************************
€30 EUR 1 gün içinde
0,0 (0 değerlendirme)
0,0
0,0
Kullanıcı Avatarı
I have more experiences working with stm32 silicon. I can do that for you and keep dateline release this project for you. Please send a message to me for more discussions.
€111 EUR 6 gün içinde
0,0 (0 değerlendirme)
0,0
0,0
Kullanıcı Avatarı
- Use STM32 MCU FSMC to interface with LCD - Provide basic graphic function such as draw line, bitmap display, etc.
€166 EUR 15 gün içinde
0,0 (0 değerlendirme)
0,0
0,0
Kullanıcı Avatarı
Hi, I have worked with STM32 controllers & with I2C sensors, UART & GPIO programming. Also i have worked on LCD display with MSP430 controllers. I believe I can understand your project and complete your requirement on time. Let me know your project details to understand in detail. - Nikunj
€100 EUR 15 gün içinde
0,0 (0 değerlendirme)
0,0
0,0
Kullanıcı Avatarı
A proposal has not yet been provided
€111 EUR 12 gün içinde
0,0 (0 değerlendirme)
0,0
0,0

Müşteri hakkında

   GERMANY bayrağı
Bad Camberg Erbach, Germany
5,0
16
Ödeme yöntemi onaylandı
Nis 1, 2016 tarihinden bu yana üye

Müşteri Doğrulaması

Teşekkürler! Ücretsiz kredinizi talep etmeniz için size bir bağlantı gönderdik.
E-postanız gönderilirken bir şeyler yanlış gitti. Lütfen tekrar deneyin.
Kayıtlı Kullanıcı İlan Edlien Toplam İş
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Ön izleme yükleniyor
Coğrafik konum için izin verildi.
Giriş oturumunuzun süresi doldu ve çıkış yaptınız. Lütfen tekrar giriş yapın.