Kapalı

PLC ( programable logic controller)- parts selection, wiring, training //Negotiable charge/price//

Negotiable price/charge

I am looking for a person who have good experience in PLC- parts selection( contactors, relay, motors( servo, linear), wire sizing, wiring, programming and giving training.

I have a project with 2 linear motors, 1 fluid pump, two servo motors. I am looking for someone who can help in:

- parts selection including PLC ( with HMI) for purchase

- help to train someone online about PLC, programming, wiring, cable sizing, motor and other parts selection

- guide in wiring ( PLC training in general). It may take 5 day ( ~ 40 hrs), the help/ training is going to be in the time that works for you and the person who gets training, weekends works best for the other person ( who has a bit of experienceIt in electricity).

please give me your best estimate and suggestion for doing this online

Beceriler: Elektronik, Elektrik Mühendisliği, PLC & SCADA, PCB Düzen, Mikrodenetleyici

Daha fazlasını gör: plc ladder logic lm90, plc ladder logic software smart relay, parts selection image map, plc ladder logic tutorial, fuzzy logic controller matlab, telemecanique programmable logic controller, project industrial programmable logic controller, programable logic control, simple programmable logic controller project, fuzzy logic controller, programmer plc ladder logic software download, genetic algorithm fuzzy logic controller simulink model, digital logic controller automatic paint color matching system, plc ladder logic, agency programmable logic controller australia, programming logic controller, programmable logic controller, logic controller, fuzzy logic controller based PV system, programmeable logic controller

İşveren Hakkında:
( 5 değerlendirme ) bellaire, United States

Proje NO: #21240321

Bu iş için 26 freelancer ortalamada $396 teklif veriyor

oobretenov

normally the person do (programming and schematic) and do wiring are not the same. I could help you with programming and part selection

$140 USD in 7 gün içinde
(32 Değerlendirme)
6.0
maykireos

Hello, We are a Turkey based special purpose machine manufacturing company. We can help you to select all needed parts and also we can train you about the software. Please contact me to talk more about your project. Daha Fazla

$5000 USD in 20 gün içinde
(7 Değerlendirme)
6.0
vadymosadchuk

Hello there. I will be happy take part in your project and do all job with PLC and HMI. I have a 6+ experience in PLC/HMI Programming. I can do all traning you need and do all the best. Looking on your task i dont see Daha Fazla

$250 USD in 7 gün içinde
(28 Değerlendirme)
5.4
mesutgode

Professional Eplan electric p8 user. Electrical engineering. Project management. PLC programmer. Scada designer.

$140 USD in 7 gün içinde
(7 Değerlendirme)
5.5
mzlst50

plc hmi scada expert and phd researcher please see the completed projects and skills and my clients reviews

$50 USD in 7 gün içinde
(25 Değerlendirme)
5.2
mzdesmag

Hello, I have read the details of the project and I will complete the PLC ( programable logic controller perfectly with my 6+ years experience in it. Kindly check my profile https://www.freelancer.com/u/mzdesmag to se Daha Fazla

1 gün içinde %bids___i_sum_sub_32%%project_currencyDetails_sign_sub_33% USD
(7 Değerlendirme)
4.1
Kingstech35

Hello, I am a senior device developer. I have plenty of experience in firmware development and micro-controller developments. I can write the firmware based on Arduino, Raspberry Pi, Pic, FPGA, ARM, DSP and so on. And Daha Fazla

$200 USD in 7 gün içinde
(4 Değerlendirme)
3.5
joever156

Hi Sir, I have done similar thing in near past if you want i can show you my previous work,& i can do this online, I can complete this job come to chat to discuss [login to view URL] would be helpful if you can share your exact re Daha Fazla

$140 USD in 5 gün içinde
(16 Değerlendirme)
4.3
cesur135

Hello I m expert I can do and i can help you

$111 USD in 3 gün içinde
(6 Değerlendirme)
2.6
zaraza73

I am an electrical engineer, MSC in applied mathematics, PHD. Control and automation. I can do, improve any proposal made by another, with a mutual agreement, with all the details that you need, within my proposal, I c Daha Fazla

$250 USD in 5 gün içinde
(1 Yorum)
2.4
bajwa026

I am an Electrical Engineer and have more than 4 years of experience in industrial automation while using different types of PLC's & Programming in Ladder Logic. I have vast experience in designing, fabricating, instal Daha Fazla

$150 USD in 5 gün içinde
(1 Yorum)
1.3
girkarmudassir98

I have been working with plc scada & him Since 3 years with interface of electric applications

$155 USD in 3 gün içinde
(0 Değerlendirme)
0.0
SauravVG

HELLO I am working as an PLC programmer having experience of more than 5 years . We are dealing with all types of plcs as it was a part of our daily job . we are working on different projects of an automobile companies Daha Fazla

$240 USD in 10 gün içinde
(0 Değerlendirme)
0.0
sam121b

I have years of experience in PLC Programming and PLC Panel manufacturing. I completed many industrial project in industries like process automation, automobile, textile etc. Also i am electrical designer which make Daha Fazla

$225 USD in 7 gün içinde
(0 Değerlendirme)
0.0
mosafreelancer

Electrical engineer 16 years of experience in home design and factory electrical maintenance Relevant Skills and Experience Electrical engineer 16 years of experience in home design and factory electrical maintenance

$133 USD in 3 gün içinde
(0 Değerlendirme)
0.0
Mohyal9090

I am an Automation Control Engineer and having experience of 5 years in Automation Industry. I have experience of programming Siemens, Mitsubishi, Omron, Allen Bradley, ABB, Panasonic, Fuji, Beckhoff, Carel, Delta, S Daha Fazla

$166 USD in 5 gün içinde
(0 Değerlendirme)
0.0
f1beto

I have 8 years as Automation engineer making projects for the industry automotive. in this projects I selected the electrical devices (sensor, PLC, Drivers, relays, HMI, motors, etc.), i develomented the drawings elct Daha Fazla

$200 USD in 7 gün içinde
(0 Değerlendirme)
0.0
SetiawanTech9

Hi friend I am Bagus from Indonesia. This Project is my jobs everyday. Please check my portfolio.I think similar with your project. I hope you choose me. I will give my best. I am not work now, so i can focus help yo Daha Fazla

$140 USD in 14 gün içinde
(0 Değerlendirme)
0.0
gaur00

I am working same kind of application

$155 USD in 3 gün içinde
(0 Değerlendirme)
0.0
sunearthmoon

Hello I have rich experiences for designing PCB Layout and electrical and electronic circuit design for 5+ years. I can help you for your project. please discuss on chat Warm regards

$140 USD in 7 gün içinde
(0 Değerlendirme)
0.0