
Completed
Posted
Paid on delivery
I need an embedded-system expert who can take my rough concept and turn it into a working hand-held device that reliably tells the user whenever a camera—hidden or otherwise—is nearby. The unit must combine two techniques: an RF scan to pick up wireless video signals and an optical sensor that pings for lens reflections, so an attacker cannot defeat the device by switching transmission modes. The job covers the entire design cycle: selecting the MCU or SoC, drawing the schematics, laying out the PCB, writing the firmware that fuses data from both detection methods, and proving everything works on a breadboard or quick-turn prototype. Low power consumption and a straightforward LED or buzzer alert are fine for the first iteration; once that is stable we can talk refinements such as a small OLED readout. Because I want a functional demo as soon as possible, please build on readily available parts—ESP32, STM32, or a comparable platform you already trust—and open-source libraries where it makes sense. I’m comfortable ordering the BOM and 3-D printing an enclosure myself if you provide the STL; your focus should stay on electronics and firmware. Deliverables • Complete schematic and PCB files (Altium, KiCad, or Eagle) • Annotated source code and compiled binary • Bill of materials with supplier links • Short video or live call showing the device detect both an active Wi-Fi camera and a powered-off pinhole lens • A concise write-up of calibration steps so I can reproduce your test results Acceptance criteria: the prototype must alert within two seconds when a consumer-grade Wi-Fi camera is switched on at 3 m distance and must visibly react when its lens sensor sees a pinhole or DSLR lens under normal indoor lighting. I’m ready to move fast, so please outline your proposed component stack and estimated timeline in the first reply.
Project ID: 40799230
24 proposals
Remote project
Active 6 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs

Hi there, **Our proposed approach:** 1. **Hardware Architecture:** Evaluate an ESP32-S3 or STM32-based controller, suitable RF detection circuitry, and an LED-based optical lens detection system. 2. **Schematic & PCB Design:** Develop the schematics, compact PCB layout, power management, and LED/buzzer alert circuitry using readily available components. 3. **Firmware Development:** Implement RF monitoring, optical reflection detection, sensor fusion, adjustable sensitivity, and real-time alerts. 4. **Prototype Testing:** Validate detection performance using an active Wi-Fi camera and powered-off camera lenses, document calibration, and provide demonstration results. 5. **Final Deliverables:** Provide editable PCB files, Gerbers, annotated firmware, compiled binary, BOM with supplier links, and calibration instructions. **Proposed Component Stack:** - ESP32-S3 or STM32 microcontroller - RF receiver or detector circuitry for supported wireless bands - LED illumination and photodetector for lens-reflection sensing - Rechargeable Li-ion battery with charging circuitry - LED/buzzer indicators **I have three quick questions:** 1. Should RF detection focus on 2.4 GHz Wi-Fi, or must it also cover 5 GHz and other wireless camera frequencies? 2. What detection range and viewing angle do you expect from the optical lens sensor? 3. Do you have preferred device dimensions or battery runtime requirements? Best regards,
$140 USD in 7 days
3.2
3.2
24 freelancers are bidding on average $159 USD for this job

Hi, I am an embedded systems engineer with over 16 years of experience. I have extensive experience developing handheld products from concept through PCB design, firmware and production support. I propose an STM32L4 controller paired with a broadband RF detector and switchable band filters, plus pulsed red LEDs and a photodiode receiver for lens reflections. I would validate both sensing methods first, then integrate battery power and LED/buzzer alerts into the prototype. RF activity alone cannot confirm that a transmitter is a camera, and optical detection requires line of sight. Does your two-second acceptance window begin at power-on or once the camera starts transmitting? This distinction matters for a reproducible test. I estimate 14 days for the first prototype, subject to component and PCB availability. I would provide the schematic and PCB files, annotated source and binary, BOM with supplier links, a simple enclosure STL, calibration instructions and a video demonstrating both detection modes. My $500 bid exceeds the posted range because the scope includes custom electronics, firmware and physical prototype validation. Parts, fabrication and shipping would be additional. I am flexible about splitting the work into milestones. Please contact me to discuss details.
$500 USD in 14 days
7.7
7.7

Hi, I can help turn your concept into a functional handheld hidden-camera detector using ESP32 or STM32. The main challenge is combining RF scanning and optical lens detection into one reliable device while minimizing false alarms and ensuring both detection methods work independently. I'll focus on: - Selecting suitable MCU, RF and optical sensor components. - Designing the circuit schematic and PCB in KiCad. - Developing firmware to process and combine both sensor signals. - Implementing LED and buzzer alerts. - Testing against active Wi-Fi cameras and powered-off camera lenses. - Providing source code, compiled firmware, PCB files and a complete BOM. I'll prioritize readily available components and a practical prototype that can be tested and improved without unnecessary complexity. I'd be happy to discuss the hardware requirements and get started! Best regards
$150 USD in 1 day
3.9
3.9

Your dual-mode detector is a strong fit for a rapid embedded prototype. I would structure the first iteration around an ESP32-S3 or STM32 platform, a suitable RF detection front end with calibrated signal measurement, and an optical lens-reflection sensor using controlled illumination plus a photodetector. The firmware would fuse RF and optical readings, apply configurable thresholds and filtering, and drive an immediate LED/buzzer alert while keeping the architecture ready for an OLED upgrade. I can take the design through component selection, schematics, PCB layout, firmware, BOM preparation, and prototype validation. Testing would specifically cover a consumer Wi-Fi camera at 3 m, powered-off pinhole and DSLR lenses, indoor-light conditions, response time, false-positive behavior, and calibration repeatability. Deliverables would include editable design files, annotated source and binary, supplier-linked BOM, and concise setup and calibration documentation. I would begin by confirming the RF bands and regulatory constraints, then produce the component stack and an initial architecture quickly so the prototype can move into breadboard validation before PCB refinement. The design will prioritize readily available parts, low power, and clear diagnostic behavior.
$100 USD in 2 days
2.8
2.8

Hi, I’m Sufyan from Fourge. We can help turn your concept into a working handheld prototype, covering the electronics, firmware, PCB design, and testing. For the first version, I’d propose an ESP32 for control and Wi-Fi scanning, a dedicated RF detector for 2.4/5.8 GHz signals, and an IR LED with a photodiode-based optical sensor to detect lens reflections. The firmware would combine both sensor readings and trigger an LED or buzzer alert. We’ll use readily available components and KiCad for the schematic and PCB files, with annotated firmware, a compiled binary, BOM, and calibration notes. One important point: RF detection can be affected by other nearby wireless devices, and a powered-off lens may not reflect enough light for reliable detection under every condition. We should validate both methods on a prototype before claiming the acceptance criteria are met. Could you confirm whether you’re open to a dedicated RF detector IC, rather than relying only on the ESP32’s Wi-Fi scan? For a first prototype, I’d estimate around 3–4 weeks, subject to component availability and test results.
$140 USD in 7 days
2.0
2.0

Hi, We are fully equipped to assist with the design and development of your hand-held hidden camera detector combining RF scan and optical sensor techniques, as well as addressing your component selection, schematic, PCB layout, and firmware needs. We can help you select the right MCU or SoC (like ESP32 or STM32), draw complete schematics, lay out the PCB, and write robust firmware that fuses data from both detection methods. Additionally, we will provide annotated source code, compiled binaries, and a bill of materials with supplier links to ensure seamless prototyping. We are happy to work closely with you, providing step-by-step guidance and clear time estimates for each phase of direct collaboration. Reach out to initiate a conversation so we can discuss the specifics and help you plan next steps! Best regards, Quantum Code Solutions
$140 USD in 7 days
0.0
0.0

Hello, My embedded-systems experience with PCB design, circuit development, and microcontroller programming across Arduino, ESP, STM32, and PIC platforms directly matches your dual-mode camera detector. I can turn the concept into a practical handheld prototype combining RF detection with optical lens-reflection sensing, while keeping the first version focused on reliable alerts and readily available components. I can produce the schematic and PCB files in an industry-standard tool, develop annotated firmware and a compiled binary, integrate the sensors and alert outputs, and prepare the BOM with supplier links. My background in electrical and embedded systems engineering also supports practical prototype development, sensor integration, and accurate technical documentation. The initial component stack can be based on an ESP32 or STM32, an RF detection front end, optical/IR sensing hardware, LED or buzzer alerts, and a rechargeable low-power supply. I can provide the requested calibration documentation and demonstrate detection of both an active wireless camera and a powered-off lens. I am ready to focus on a fast, functional first iteration and can discuss the component selection and estimated timeline immediately. Thanks!
$155 USD in 6 days
0.0
0.0

My electrical engineering skill, combined with a strong professional background in technical design, analysis, documentation, and multidisciplinary coordination, can support the structured development of your dual-mode detection device. I understand the importance of turning a concept into clear, reviewable engineering deliverables while keeping safety, accuracy, and practical implementation in focus. I can contribute to the electronics design documentation, component evaluation, schematic and PCB review, BOM preparation, and technical write-up required for your prototype. My experience producing accurate engineering documentation and coordinating complex technical work is directly relevant to keeping the design organized and reproducible. I would be transparent that embedded firmware development and RF/optical detection validation are specialized areas that should be confirmed against the available project resources before relying on me as the sole implementation specialist. I would be glad to support the electrical-engineering and documentation side of this project and help coordinate a practical prototype development effort.
$140 USD in 5 days
0.0
0.0

Hi, I have an experienced embedded systems and electronics team with expertise in ESP32, STM32, PCB design, C/C++ firmware, RF modules, and optical sensors. We can help develop your handheld camera detection device, including hardware design, component selection, firmware development, PCB layout, and prototype testing. We can also provide complete source files, BOM, and technical documentation. Could you share your initial concept or reference images so we can propose the component stack and estimated timeline?
$140 USD in 7 days
0.0
0.0

Hello, ~~~~~~~~~~~~~~~ Your project is an exciting combination of RF engineering, embedded systems, and optical detection. I can help turn your concept into a functional handheld prototype with reliable dual-mode camera detection. I propose using an ESP32 or STM32 MCU, an RF detection front end with a suitable wideband RF detector, and an IR LED/photodiode-based optical reflection sensor. I'll develop the PCB, implement firmware to fuse both detection methods, and configure LED/buzzer alerts with low-power operation in mind. My approach will focus on practical component selection, signal processing, sensor calibration, and reliable detection performance. I'll also validate the prototype against your Wi-Fi camera and optical lens test scenarios, documenting the results and calibration procedure. Proposed timeline: - Component selection and schematic: 2-3 days - PCB design and review: 3-4 days - Firmware development and integration: 4-5 days - Prototype testing and documentation: 2-3 days I'll provide complete KiCad/Altium design files, annotated firmware, compiled binary, BOM with supplier links, and testing documentation. I have a strong background in embedded electronics, PCB design, microcontrollers, and firmware development, and I'm comfortable taking this from concept through prototype validation. Let's discuss the detection range and RF frequency coverage so we can finalize the component stack and get started. Best regards
$140 USD in 7 days
0.0
0.0

My strongest technical skills include C/C++, Embedded C, microcontroller programming (ESP8266, ESP32/ESP32-S3, ATmega328P), sensor interfacing, wireless communication, and hardware–software integration. I have hands-on experience developing real-time monitoring and control systems, implementing WebSocket/TCP communication and CRC16-based data verification, and building cross-platform applications using Flutter. Through projects such as SHAI — Smart Hydroponics AI, ESP Monitor, and Wireless Switchboard using RF Communication, I apply embedded engineering principles to practical problems involving connected devices, automation, and intelligent monitoring. I also have experience in system integration, firmware debugging, testing, data acquisition, PCB-level rework, and SMD soldering. My work has been recognized through the Best Project Award at the Texas Instruments Innovation Lab and the Best Paper Award at NCATEX-2026 for my AI-enabled hydroponics research. I aspire to develop reliable, efficient, and intelligent embedded solutions and build a career in firmware engineering, semiconductor technology, Industrial IoT, and automation and control systems.
$30 USD in 5 days
0.0
0.0

Dual-mode detection within 2s: I’ll fuse RF scanning (ESP32/STM32) for nearby wireless video and an optical lens-reflection sensor for passive cues, using a voting/threshold algorithm so switching transmission modes can’t blind the unit. I’ll deliver full KiCad/Altium schematics+PCB, firmware, BOM with supplier links, and a breadboard-to-prototype validation path with calibration steps you can reproduce. I propose an initial stack: ESP32-S3 (or STM32) + sub-GHz/2.4GHz RF front-end approach (per availability) and a compact reflective optical module (IR LED + photodiode/phototransistor) to detect glass/reflective elements under indoor lighting. Power-first design: sleep modes, interrupt-driven sampling, and simple LED/buzzer alert for iteration one; optional OLED later. Timeline: Day 1–2 requirements refinement, Day 3–5 schematics+PCB layout, Day 6–8 firmware, Day 9–10 breadboard prototype, Day 11–12 calibration+demo (active Wi‑Fi camera at 3m; powered-off pinhole/DSLR lens).
$140 USD in 7 days
0.0
0.0

Hardware detection is shifting toward multipath sensing: relying on one signal path is easy to evade, so your dual-mode camera detector should fuse RF + optical evidence. I’ll implement a handheld prototype that uses an ESP32/STM32-class MCU, an RF front end for detecting nearby Wi‑Fi/video transmissions, and an optical reflection/IR sensor tuned to catch lens glare from both active and “off” pinhole/DSLR apertures. Design cycle: I’ll select the component stack, draw complete KiCad/Altium schematics, lay out and route the PCB with proper shielding/grounding, then write firmware that time-stamps and fuses both detection streams with a simple decision logic and tight power budgeting. First demo goal: <2 s alert at 3 m for consumer Wi‑Fi cameras; second goal: visible LED/buzzer reaction under normal indoor lighting when the lens sensor sees a pinhole. I’ll provide annotated C/C++ source and a compiled binary, plus a BOM with supplier links and an enclosure-ready STL if you want it.
$140 USD in 7 days
0.0
0.0

Many bids fail by treating this like a single-sensor gadget: RF-only gets spoofed, optical-only misses stealth. I’ll build a dual-mode detector where RF scanning and lens-reflection sensing run in parallel, then fuse results with a simple, tunable decision rule so mode switching can’t defeat it. I’ll prototype fast on an ESP32 (preferred for Wi‑Fi/RSSI capture) or STM32 if you want stricter power control, using proven RF front-end modules plus an optical path (photodiode/reflectance sensor with controlled sampling) for reflection pings. I will deliver KiCad/Altium-ready schematics + PCB layout, MCU firmware in C/C++ with open-source drivers, and a calibrated alert pipeline that triggers <2 s at ~3 m for consumer Wi‑Fi cameras, plus visible reaction under indoor light for pinhole/DSLR optics. Estimated timeline: 7 days for breadboard proof, 10–14 days for PCB rev1 and tuning, 1 day for enclosure/STL integration.
$140 USD in 7 days
0.0
0.0

What happens when an attacker switches from one wireless video mode to another—will your device still alarm in <2s at 3 m? I’ll build a dual-channel detector that fuses RF Wi‑Fi video energy scanning with an optical reflection sensor so the “blind spot” of either method is closed. First prototype uses ESP32 (or STM32 if you prefer) plus a calibrated photodiode/IR lens-reflection module and an RF front-end appropriate for consumer cameras; firmware triggers LED/buzzer and later an optional OLED. I’ll deliver KiCad/Eagle/Altium schematics + PCB, annotated C/C++ firmware with libraries, BOM with supplier links, and an assembled breadboard/quick-turn demo. Acceptance test plan: verify alarm within 2 seconds when a Wi‑Fi camera is powered on at 3 m indoors, and confirm a visible reaction when a pinhole/DSLR lens is presented under normal lighting.
$140 USD in 7 days
0.0
0.0

I’ll turn your dual-mode “camera nearby” concept into a reliable handheld prototype that alerts fast by fusing RF wireless-video sensing with optical lens-reflection detection. I’ll start by selecting a trusted platform (ESP32 or STM32) and defining an RF front-end strategy plus an optical sensor/illumination scheme so switching transmission modes won’t bypass detection. Next, I’ll produce full KiCad/Altium schematics and a manufacturable PCB, then firmware that samples both channels, filters noise, and drives an LED/buzzer with a 2s alert target. You’ll get annotated source + compiled binaries, BOM with supplier links, and a breadboard-to-PCB validation plan. I’ll also provide calibration steps to reproduce results (e.g., indoor lighting lens tests and 3m Wi‑Fi camera power-on). If you want enclosure STL, I can output mounting/mech notes.
$140 USD in 7 days
0.0
0.0

Hi, I'm Maksym, an embedded systems and electronics engineer with experience in microcontroller development, analog signal conditioning, PCB design, sensor integration, and hardware prototyping. I can help turn your concept into a functional handheld camera-detection prototype combining RF scanning and optical lens detection. For the initial version, I recommend an ESP32 or STM32 controller, an RF detection front end covering relevant Wi-Fi bands, and an IR LED with a photodiode or phototransistor receiver for lens-reflection detection. I'll develop the schematics, PCB, firmware, detection logic, LED/buzzer alerts, and calibration procedure. I'll also account for sensitivity adjustment and false-positive reduction. I estimate 3–4 weeks for the first functional prototype, including testing and documentation. One important point: detecting powered-off lenses depends on their orientation, distance, and optical conditions, so this will require controlled validation rather than a universal detection guarantee. Looking forward to developing this with you! Best, Maksym
$140 USD in 7 days
0.0
0.0

Brooklyn, United States
Payment method verified
Member since Sep 12, 2026
$30-250 USD
£20-250 GBP
$30-250 USD
₹1500-12500 INR
$250-750 USD
$250-750 AUD
$250-750 USD
£20-250 GBP
$10-30 USD
$250-750 AUD
₹600-1500 INR
$750-1500 AUD
₹1500-12500 INR
₹600-1500 INR
$250-750 USD
$250-750 AUD
$250-750 USD
$30-250 CAD
$750-1500 USD
₹1500-12500 INR
₹600-1500 INR