PIC16F877A Programming Expert Needed

@Mahihassi

As an experienced Electrical Engineer with a Master's degree in Embedded Systems, my skill set aligns perfectly with what you need for this project. I have extensive experience not only with the PIC16F877A microcontroller but also with a range of microcontrollers including STM32, ESP32, NXP LPC - just to name a few. My proficiency in C programming extends specifically to microcontrollers and I'm quite familiar with MPLAB X IDE. Accuracy and attention to detail are two attributes I hold in high regard. Being meticulous at every stage of the development process allows me deliver error-free code that is well-documented, making it easy for future modifications if need be. Moreover, my background in embedded systems and problem-solving skills have equipped me to tackle any challenges head-on - ensuring that the final product meets and exceeds your expectations. In addition to my technical expertise, I offer a full product lifecycle approach that begins from the ideation stage through prototype development, firmware creation, PCB design, and complete IoT product engineering. With my help, not only can you expect a well-coded PIC16F877A program but also support in building any necessary accompanying features to create a robust end solution. I am confident that choosing me for your project will result in a timely delivery of top-quality code and ultimately in boosting your project's success.

@cpp2048

I have this part in stock and breadboard it for program testing. Wide experience in Microchip PIC MCUs. Let's get started. Thanks

@elect2eng

Can you please send me your hardware circuit diagram. I have done programming of pic16f877A. I have this board to simulate and test the code also.

@TingWang250617

Hello, I am an experienced embedded systems programmer with strong expertise in PIC16F877A microcontrollers. I develop efficient, well-documented C code using MPLAB X IDE and XC8 compiler, following Microchip best practices. I have hands-on experience with peripherals such as GPIO, timers, ADC, UART, SPI, and I2C, and I ensure error-free, maintainable firmware through careful testing and debugging. I am detail-oriented, reliable, and ready to deliver high-quality results within your timeline. I would be happy to discuss your project requirements. Best regards,

@ghayasa727

With six years of experience as an electrical engineer and a specialty in microcontrollers, I believe I am the perfect fit for your PIC16F877A programming project. Throughout my career, I've honed my proficiency in C programming for microcontrollers and gathered ample experience with MPLAB X IDE- the exact environment this task requires. As a bonus, I have an extensive background in embedded systems, a field that complements your project's demands. Not only can I program your PIC16F877A chip to your exact specifications, but as an engineer with an attention to detail, accuracy and a penchant for troubleshooting, rest assured, my code will be well-documented and error-free. This is fundamental when it comes to successful programming endeavors. In conclusion, you're looking for someone with expertise in PIC microcontrollers, particularly the PIC16F877A - that's me. You need someone skilled in C programming for microcontrollers and adept at using MPLAB X IDE - once again, that's me. Choose me for this project and you'll gain an ally who brings years of experience from similar projects to bear on your project. I look forward to collaborating with you on this important endeavour!

@alishba438

Working in the field of Electrical Engineering and Automation since 5 years sets me apart from lots of programmers. During this tenure, I have developed my expertise in C++, Python, C#, Java & HTML using Arduino, Raspberry Pi, ESP8266, Orange Pi, Atmega 328p and numerous other microcontrollers. I have made projects for various clients which include various Control Systems, Automation Systems and custom boards to achieve various specific applications.

@amitjoshi79

Hello, I understand that you need reliable C firmware for a PIC16F877A microcontroller, developed and built using MPLAB X, with clean structure and proper documentation. This is a straightforward embedded task, but accuracy and attention to detail are critical to ensure stable operation on real hardware. I will implement the firmware in standard embedded C, following a clear modular structure that is easy to understand, compile, and maintain. The code will be tested in MPLAB X using the XC8 toolchain and delivered with clear comments and configuration notes so you can extend it later if needed. Before starting, I will confirm the exact functionality, peripherals, and pin usage to avoid assumptions and rework. Once confirmed, I can deliver a tested and well-documented solution within a short, predictable timeframe. If you would like to proceed, please share the functional details and preferred peripherals, and I can start immediately. Thanks and Regards, Amit Joshi

@PremchandGat

I am interested in programming your PIC16F877A microcontroller in C and can deliver reliable, well-documented firmware. I have over six years of hands-on experience working with PIC16 series controllers, including PIC16F877A, using MPLAB X IDE and the XC8 compiler. My background includes developing drivers for peripherals such as UART, SPI, I2C, Timers, ADC, EEPROM, and GPIO, and implementing interrupt-driven system architectures. I consistently write clean, modular, and well-commented embedded C code with attention to memory usage and performance. I also provide pin configuration documentation, debugging assistance, and code verification to ensure error-free execution. With strong problem-solving skills, attention to detail, and a solid foundation in embedded systems, I am confident I can deliver high-quality firmware tailored to your project requirements and would be happy to discuss the full scope and timeline.

@KennerRoj

Hello, I have a strong background in electronics and embedded systems, with hands‑on experience programming microcontrollers in C and working with development environments like MPLAB X. I’ve designed and fabricated PCBs, built automation systems with Arduino and ESP32, and delivered reliable firmware for motor control and sensor integration. Accuracy and clear documentation are always my priorities, so the code I provide is clean, error‑free, and easy to maintain. I can help you program the PIC16F877A exactly to your requirements, ensuring that the firmware is well structured and thoroughly tested. My approach is systematic: I review the specifications, implement the logic step by step, and annotate the code so future updates are straightforward. I’m confident I can deliver the solution quickly and with the level of precision you expect. Best regards, Kenner

@eduard141

❤️ Hello, I’m an embedded systems programmer with solid hands-on experience working with PIC microcontrollers, including the PIC16F877A. I develop firmware in C using MPLAB X IDE and focus heavily on clean structure, reliability, and clear documentation so the code is easy to maintain and expand later. I’ve programmed PICs for real-world applications such as sensor interfacing, communication protocols, timing-critical control logic, and peripheral integration. I pay close attention to configuration bits, memory usage, and hardware behavior to ensure stable, error-free operation on actual hardware—not just in simulation. You can expect well-commented code, logical flow, and clear explanations of how everything works. I’m detail-oriented, comfortable debugging at the register level, and I don’t cut corners when it comes to correctness. I’d be happy to discuss your project requirements and get started right away. Best regards, Eduard

@PatoPro

With my extensive background in Software Development, particularly in the field of embedded systems and microcontrollers, I am confident that I make an excellent choice for this PIC16F877A programming project. Being a seasoned programmer well-versed in C and with avid proficiency in MPLAB X IDE, I have hands-on experience with the very tools required for your project. Over my 5 years of practice, I've consistently strived to deliver not just flawless code but also elegant and well-documented solutions. My strong background in software engineering enhances my ability to ensure top-notch quality and effective functioning within the microcontroller setup. Additionally, working on multiple systems has instilled in me a keen eye for detail and an unwavering commitment to producing measurable results. With each task, my ultimate goal has been to attain 100% client satisfaction, an aim that perfectly aligns with your requirement for error-free outputs. Moreover, drawing from my experience in Data Science and Cybersecurity domains, I promise to craft a secure code that meets your needs fully.

@kawtherb6

With a name like Kawther, my knack for analyzing complex problems and developing efficient solutions is highly comparable to my passion about Computer Science and embedded systems. My proficiency in C can attest to my suitability for carrying out this task of programming the PIC16F877A chip using C language. In addition to my skills, I boast a strong mathematical foundation providing meticulous attention to detail and accuracy which are essential in delivering error-free, well-documented codes expected from an expert such as myself. I also have a background in systems programming and logical reasoning, which further substantiates why I am an ideal fit for this job. I have always been commended for my ability to decipher challenging tasks, employing both problem-solving skillsand my competence with microcontrollers, making programmed chips comportable with desired specifications. This is a quality that I intend to leverage for your project, ensuring a product of not just technical excellence but one that takes into account the fine intricacies of your specifications. So go ahead, hire me and let's get started on crafting you an ingenious solution!

@AndreaTO

I'm a System Engineer and hardware architect. I have tens years of experience with Pic mcu, especially 8 and 16 bits. I'm able to program them in C as well as assembly.

@jowdiniz

I am a strong fit for this project because I combine extensive experience in embedded systems with a practical, results-focused approach. I have over 12 years of experience developing reliable firmware for microcontrollers and embedded devices, and I understand how to turn requirements into working, well-tested solutions. I focus on delivering code that is clean, easy to understand, and works correctly on real hardware. I communicate clearly, ask the right questions early, and keep the project moving smoothly without unnecessary delays. You can expect professional execution, timely delivery, and a solution that meets your expectations the first time. My goal is to make the development process simple and stress-free for you while delivering a dependable result you can confidently use or build upon.

@SchumiSchumi

Dear Sir, I have an eval board with PIC16F877 so I can immediatelly start development for you. We can start a chat about your specifications. I'm an embedded programmer since 1999 with all equipment required for embedded C development.

@roberterikk

I have already worked with several microcontrollers in low-level C and the MPLAB X IDE. Additionally, I have completed an apprenticeship as an electronics technician, which is very helpful to me in low-level programming.

@puppalav6

Hi, I have around more than 18 months of experience in embedded systems. Especially I had developed a bootloader for PIC16f877a on bare metal. I have experience with using bare metal firmware well as mplab's MCC code generator for drivers. I also had delivered a successful end device which works with lora and pic16lf Microcontrollers. I can provide you a well documented and error free code. Can provide even a bare metal firmware if you want code to be as light and as small space as it can cover in flash memory.

@Avninder1

Hi, I have been developing complete products based on microcontrollers since the last 25 years. I have extensively worked on PIC16F midrange microcontrollers. Have developed two products based on PIC16F877A. A Sinewave solar hybrid system and an IR remote based multi switch controlling device with LCD display. I can provide a well documented and tested code in MPLAB XC8 C compiler. I have PIC16F877A microcontrollers with me currently and all the necessary equipment.

@alphanmehmet

I hold a PhD in Power Electronics and Embedded Systems and have over 10 years of hands-on experience in embedded software development. I have programmed a wide range of Microchip PIC microcontrollers, from PIC16 and PIC18 to PIC24 and PIC32, using C language with MPLAB X IDE. My experience includes low-level register-based programming, timers, interrupts, ADC, PWM, UART, SPI, and I2C peripherals. For PIC16F877A, I can deliver: Clean, error-free, well-documented C code MPLAB X project files ready to compile and flash Hardware-oriented, reliable implementation (not Arduino-style abstractions) If required, I can test the firmware on real hardware using an EasyPIC v7 development board, record a working test video, and share it with you as proof of correct operation before final delivery. I work systematically, communicate clearly, and focus on delivering fully functional and verifiable results, not just code. Please share the exact functional requirements (I/O usage, peripherals, timing constraints), and I can start immediately.