
Closed
Posted
Paid on delivery
Job Title: Embedded Systems & Cellular IoT Engineer for Smart LPG Utility Platform Project Overview: We are developing SDP Elite, an IoT-enabled mobile LPG distribution and utility platform. We are seeking an experienced Embedded Systems / IoT Engineer to bring our smart hardware concept to life—specifically designing the custom firmware, telemetry integration, and control circuitry for automated safety shut-offs and remote monitoring. What You Will Do: Translate our functional requirements into a robust, low-power embedded hardware and firmware architecture. Integrate cellular IoT connectivity (e.g., LTE-M/NB-IoT/GSM) for secure, real-time cloud data transmission via standard protocols (MQTT/HTTP). Interface microcontrollers (such as ESP32 or STM32) with industrial sensors, flow meters, and automated solenoid valves. Design for reliability, safety, and field deployment in gas utility environments. Deliver a working Proof-of-Concept (PoC) prototype, complete with testing and documentation. Deliverables & IP Terms: Fully functional prototype firmware and hardware schematics. Complete PCB layout, Gerber files, and source code. Full Intellectual Property (IP) assignment to our company (all designs, code, and schematics remain 100% our property upon completion). Required Qualifications: Strong portfolio in embedded systems, custom PCB design, and cellular IoT product development. Proven experience writing clean, secure firmware for connected hardware. Willingness to sign a Mutual Non-Disclosure and IP Assignment Agreement before project kickoff.
Project ID: 40793042
56 proposals
Remote project
Active 3 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
56 freelancers are bidding on average $1,253 USD for this job

Greetings, I worked on Qualcomm LTE Cat-M/NB-IoT modem firmware, including low-power PSM/eDRX, modem control, and RTOS-based communication, so I have good experience with cellular IoT devices. I've also developed STM32/ESP32 sensor systems, designed custom PCBs in Altium, and handled hardware bring-up and firmware integration. For your LPG platform, I think the main challenge is making the safety shut-off reliable even when cellular communication fails, so I would keep the critical safety logic independent of cloud connectivity. I can deliver an initial architecture and bench demo within 1–2 weeks, with a complete PoC taking around 4–6 weeks depending on hardware availability and PCB manufacturing. I'm comfortable signing the NDA and full IP assignment agreement before starting. Sincerely, Oleksandr Gergel
$1,000 USD in 7 days
8.4
8.4

Hi, I am an embedded systems engineer with over 16 years of experience. I have extensive experience with custom PCB design and cellular IoT firmware, taking connected products from concept through prototype validation and production. I can help bring SDP Elite to a working PoC, connecting your sensors, flow meters and solenoid valves with secure cloud telemetry. I would first clarify the operating requirements and safety behavior, then develop the electronics and firmware together and test the complete prototype. Particular attention would go to local shut-off behavior during sensor faults, power loss or interrupted connectivity. I can deliver the schematics, PCB layout, Gerbers, firmware source and testing documentation, with full IP assignment to your company. I am willing to sign the mutual NDA and IP agreement before kickoff. I can also support the next steps toward a field-ready product, including production preparation and further firmware development. Have the sensors and valves been selected, and is your cloud interface already defined? Please also confirm whether prototype components, fabrication and assembly must fit within the stated budget. Please contact me to discuss details.
$1,500 USD in 45 days
7.6
7.6

Since 2003 I am working in Digital Electronic. So more than 18 years of experience in Electronics. Arduino NANO/UNO/MEGA, ESP32 and Raspberry PI to build a digital device to read sensor data and send it to the web server, motor control, control relay switches and LEDs. More than 5(five) years of experience in Arduino design and build. If you want an excellent and error-free project delivery, then send a message to me, please. Since 1995 I have been working on Analog and Digital Electronics to build any kind of device. I have build lots of devices. So more than 20 years of experience on Electronics. Including power supply design. Any kinds of schematic and PCB design.
$1,500 USD in 7 days
6.6
6.6

Hi, I’m an Electronics Design Engineer with 8+ years of experience in embedded systems, custom PCB design, and firmware development. I have a team of experts to handle your project, providing complete hardware and firmware development services. We have experience with ESP32, STM32, industrial sensors, RS485, Modbus, wireless communication, and custom IoT products. We can help develop the hardware architecture, control circuitry, cellular connectivity integration, firmware, and prototype. I can also share relevant previous work samples for your review. We are comfortable signing NDA and IP assignment agreements. Let's discuss your requirements. Best regards, Muhammad Adeel
$1,300 USD in 7 days
6.6
6.6

Hi, I am an embedded hardware/firmware engineer with 7+ years of experience in custom PCB design, STM32/ESP32 systems, cellular IoT, industrial sensors, RS-485/CAN, power management, and safety-oriented control electronics. I have developed connected embedded systems using LTE/cellular modules, MQTT/HTTP telemetry, sensor acquisition, remote diagnostics, and protected relay/solenoid outputs. Approach: ✅ I will define the MCU, cellular modem, sensor/flow-meter interfaces, solenoid driver, power architecture, protection, and cloud communication structure. ✅ I will design the schematic and PCB with surge/ESD protection, watchdogs, fail-safe valve control, diagnostics, and field-reliable power conditioning. ✅ I will develop secure C/C++ firmware for sensing, telemetry, MQTT/HTTP communication, event logging, fault handling, remote monitoring, and autonomous safety shutdown. ✅ I will support prototype bring-up, bench testing, connectivity validation, and provide Gerbers, BOM, source code, manufacturing files, and technical documentation. Questions: ✅ Which LPG flow meter, pressure/gas sensors, and solenoid valve models are currently planned? ✅ Which cellular regions must be supported, and do you prefer LTE-M/NB-IoT with 2G fallback? ✅ What conditions must trigger an automatic shut-off, and must the valve remain safe if MCU/cloud communication fails? ✅ Is an AWS/Azure/custom backend already defined, including MQTT topics or API specifications? Best, Yaroslav
$1,125 USD in 7 days
5.7
5.7

Hello, I am an Electrical/Electronics Engineer with 15+ years of experience in STM32/ESP32 firmware, custom PCB design, industrial sensors, and IoT systems. I can develop your SDP Elite PoC, including cellular connectivity (GSM/LTE), MQTT/HTTP telemetry, flow-meter integration, solenoid valve control, and reliable embedded firmware. I will deliver schematics, PCB layout, Gerber files, source code, testing, and documentation. I prioritize fail-safe operation, secure communication, and reliable shutdown during connectivity or power failures. I am also willing to review and sign your NDA and IP assignment agreement. Best regards, Hamza
$750 USD in 4 days
5.4
5.4

Hello, I can help develop the embedded hardware and firmware for your SDP Elite platform, from system architecture to a working PoC. I have experience with ESP32 and STM32, cellular IoT modules, GNSS, sensor interfacing, CAN/RS485, solenoid control, and custom multi-layer PCB design. I’ve previously worked on smart tracking devices and automotive fire suppression control systems. I can handle the hardware design, firmware development, MQTT/cloud communication, sensor integration, and automated valve control, with a strong focus on reliability and safety. I’m also comfortable signing an NDA and IP assignment agreement before starting. I’d be happy to discuss your architecture and development stages in a meeting. Best regards Eng Mahmoud Ibrahim Electronics Enginner Replies in 10min
$1,125 USD in 7 days
5.6
5.6

Your Smart LPG platform needs dependable embedded systems and PCB design at its core, and my skills in Electronics, Embedded Systems, and PCB Layout directly match the hardware development requirements. I can support the design of the custom control circuitry, sensor and solenoid-valve interfaces, and a practical prototype PCB aligned with your utility deployment goals. My experience includes PCB Design alongside technical design and engineering tools such as AutoCAD, SolidWorks, CATIA, and Abaqus. This background supports accurate schematics, structured board layouts, and clear technical documentation for the prototype. I can also work within your confidentiality and IP-assignment requirements, keeping the delivered designs, source files, and documentation aligned with your ownership terms. I would be glad to contribute my embedded systems and PCB layout skills to turning the SDP Elite concept into a functional PoC.
$751 USD in 1 day
4.8
4.8

Hi, Your project requires a reliable embedded controller that combines LPG flow monitoring, cellular telemetry, and safe local control of the shut-off valve. I can contribute to the electronics, embedded systems, and IoT architecture, starting with sensor interfaces, valve-driver requirements, power management, and cellular communication. The initial step would be to establish the hardware and firmware architecture around the selected sensors, flow meter, solenoid valve, and cellular modem. I would also define the expected behavior during power loss, sensor faults, and cellular outages before finalizing the control approach. The proof of concept would be developed and tested against agreed requirements, with schematics, PCB layout, Gerber files, source code, and documentation included in the deliverables. I am comfortable discussing the mutual NDA and IP assignment terms before kickoff, including the licensing requirements of any third-party components used in the project. Could you share the specifications of the intended flow meter and solenoid valve, along with the preferred cellular connectivity option? These details would help establish a realistic implementation plan for the prototype.
$750 USD in 15 days
5.0
5.0

I have more than 12 years experience in embedded and iot based products . So I can do your job within a time limit with your satisfaction
$6,200 USD in 90 days
4.9
4.9

My 8+ years in RF engineering and embedded systems directly match the demands of your smart LPG platform, particularly its connected hardware, reliable control circuitry, and field-ready operation. I develop embedded controllers and electronic systems using C/C++ firmware, microcontrollers, and PCB layout, with experience taking designs from concept through simulation, testing, validation, documentation, and implementation. My background also includes RF modules, power electronics, high-power systems, and electrical distribution design—valuable for integrating cellular connectivity, sensors, flow meters, and automated shut-off controls while prioritising safety and reliability. Strong troubleshooting and system-integration skills enable me to deliver a coherent PoC across hardware, firmware, and telemetry requirements, including the schematics, PCB files, source code, and technical documentation you require. I am prepared to work under your NDA and IP assignment terms, and I would welcome the opportunity to turn SDP Elite’s smart hardware concept into a robust working prototype.
$1,000 USD in 7 days
4.4
4.4

Dear Client, I can help take SDP Elite from functional requirements to a working cellular-IoT hardware prototype, covering the electronics, PCB, telemetry interfaces, valve control, firmware integration, and prototype validation. PCB Must Innovations has 30+ years of experience in electronics/PCB development across ESP32/STM32 systems, LTE/GSM modules, MQTT-connected IoT hardware, industrial sensors, solenoid/relay drivers, power management, protection, and production support. I can develop the system architecture, cellular connectivity, sensor/flow-meter interfaces, automated shut-off circuitry, protected solenoid drivers, PCB, BOM, Gerbers, source files, and bring-up documentation. For an LPG application, I would treat loss of communications, sensor faults, brownouts, stuck valves, and unsafe command states as design requirements from the beginning rather than adding them after the prototype works. One question: which specific event should physically trigger the emergency LPG shut-off—gas leakage, abnormal flow, pressure condition, remote command, or a combination? Message me with that answer and I’ll outline the hardware, telemetry, and fail-safe architecture before you commit. Kind Regards Prat PCB Must Innovations
$980 USD in 14 days
6.4
6.4

Hi, I'm interested in developing the embedded hardware and firmware foundation for your SDP Elite smart LPG platform. My background includes PCB design, electronics, software development, Python automation, and application integration. I'd approach this project with a modular architecture that separates sensor acquisition, cellular communication, monitoring, and control functions. **Proposed technical approach:** - Evaluate ESP32/STM32 architecture based on power and connectivity requirements. - Interface industrial sensors, flow meters, and valve-control signals. - Develop firmware for sensor acquisition and telemetry. - Integrate LTE-M/NB-IoT or GSM communication as supported by the deployment environment. - Implement MQTT/HTTP communication with the cloud platform. - Design PCB schematics and layouts using KiCad. - Implement device status monitoring, fault detection, and communication recovery. - Prepare firmware documentation, BOM, Gerbers, and source files. - Develop a prototype testing and validation plan. Safety-related shut-off functions would use appropriately rated, fail-safe components and independent protection mechanisms. Final LPG deployment would require qualified safety engineering and applicable certification. Could you share the sensor specifications, cellular connectivity requirements, valve details, and expected battery operating life? Best regards, Ankit
$750 USD in 10 days
4.2
4.2

Taking an IoT product from embedded architecture through factory-ready PCB production is my core strength. With 10+ years of hands-on experience, I develop STM32 and ESP32 firmware, custom PCB layouts, and production-ready designs supported by deep integration with JLCPCB, PCBWay, and SMT assembly lines. Your LPG platform aligns directly with my experience in FreeRTOS, C/C++/Rust, MQTT, OTA updates, and ultra-low-power embedded systems. I can support the microcontroller interfaces, cellular/cloud telemetry architecture, sensor and valve control circuitry, and the reliability-focused hardware needed for field deployment. My manufacturing expertise also covers DFM, panelization, component sourcing, test points, calibration, serialization, factory-test modes, Gerbers, BOM, and pick-and-place files—so the PoC can be prepared with production in mind. I am ready to work under your NDA and IP assignment terms and deliver a complete, documented hardware and firmware package for SDP Elite. Choose me to turn your smart LPG concept into a robust, manufacturable connected device.
$1,000 USD in 7 days
3.5
3.5

I’m a hands-on embedded systems and IoT engineer with strong experience in exactly the stack your SDP Elite platform needs. Relevant background: Cellular IoT firmware: I’ve built production firmware around Quectel LTE modules (EG915N, A7682E/SIM800L family), integrating MQTT over LTE-M/NB-IoT for real-time cloud telemetry — same pattern your platform requires. MCU firmware: Daily driver is ESP32 (ESP-IDF), with STM32 work alongside. I write clean, low-power firmware with watchdog-safe field-deployment patterns. Sensors & actuators: I’ve interfaced flow meters, solenoid valves, and industrial sensors on custom PCBs — safety-critical peripheral control is routine for me. PCB design: I deliver complete schematic → layout → Gerber packages. My work covers cellular RF, power stages, and compact mixed-signal layouts. PoC delivery: I work solo and move fast. I scope clearly, document as I build, and hand off production-ready source + schematics. I’m comfortable signing your NDA and IP assignment before kickoff — full ownership transfer is standard in my client engagements. I’d like to understand your cloud backend target (AWS IoT / custom MQTT broker?) and the specific solenoid/flow meter models before locking a timeline. Happy to jump on a quick call to scope the PoC milestone together. — XinTian
$1,125 USD in 7 days
3.4
3.4

Our combination of embedded systems development and high-frequency electronics makes us well suited to build the connected hardware behind your smart LPG platform. We develop Arduino and ESP-based systems in C/C++, with experience spanning concept, simulation, PCB implementation, and system integration—directly matching your need for a reliable microcontroller-based PoC. Our PCB expertise includes KiCad, Proteus, and Altium Designer, supporting schematics, board layout, and production-ready design deliverables. Our RF and communication background is also valuable for cellular-connected hardware, while our electronics and microcontroller skills support integration with sensors, flow meters, and automated control circuitry. We understand the importance of dependable hardware for field deployment and can provide organized source code and technical documentation alongside the prototype. We are prepared to work under your mutual NDA and IP assignment terms, and would be glad to develop the SDP Elite hardware and firmware into a robust working proof of concept.
$750 USD in 7 days
3.6
3.6

Hello, I can contribute to development of hardware part right from concept to final prototype ready PCB. I can even support you during development & assist in FW. I have made several battery & non-battery IoT products running in field, all having wireless like LTE, WiFi, BLE, GSM, NB-IoT. I can show you examples once you connect in chat. I carry 20+ years of design & development experience. I specialize in precision analog, sensor signal conditioning, EMI-EMC, low power, power supplies, high speed & long-life battery IoT products. Please see my works & profile below, https://www.freelancer.in/u/JagdishCK I shall work with you for placement of components & lock those keeping in mind ease of manufacturability. Finally, I will route the PCB as per EMI-EMC guidelines & handover final schematic, layout, BOM, etc & other package in Altium. Please message me for more discussions. Regards, Jagdish Karamchandani
$1,000 USD in 30 days
3.0
3.0

Dear Sir, I would like to present myself as prospective candidate to do your project. I have sound knowledge and experience in Electronic and Programming include ESP32 programming, Schematic development and PCB design. I have read your project description and i would be the best candidate to do yours. And I'm willing to sign NDA for you. Before starting please send me complete description. Please visit my portfolio for some of PCBs I have designed. Those also compleated with firmware too. Expecting favorable reply from you, I remain. Isuru Athukorala
$1,100 USD in 20 days
3.1
3.1

I have 16 years of experience in electronics R&D, embedded systems, IoT hardware and firmware development. I can develop the SDP Elite LPG platform, covering hardware architecture, firmware, cellular connectivity and PoC integration. My relevant experience includes ESP32/STM32, cellular IoT, MQTT/HTTP, industrial sensors, flow meters, solenoid valve control, CAN, RS485/Modbus and custom PCB design. Proposed work: - Develop embedded hardware and firmware architecture. - Integrate cellular modem and secure MQTT/HTTP cloud telemetry. - Interface flow meters, pressure sensors and solenoid valves. - Implement local safety interlocks and fail-safe shut-off logic independent of cloud connectivity. - Design custom PCB, power management and protection circuits. - Deliver working PoC, firmware source, schematics, PCB layout, Gerbers and testing documentation. I recommend starting with ready-made modules for PoC development, followed by custom PCB design after system testing and validation. I am comfortable signing your NDA and assigning all agreed project IP to your company. Best regards,\ Subhash Suman\ Embedded Systems | IoT Hardware & Firmware | PCB Design
$800 USD in 7 days
3.0
3.0

Hi there, Which cellular module and network region are you targeting for the first PoC, and do you already have preferred sensors, flow meters, and valve drivers selected? Will the device need local fail-safe logic for shutoff during network loss, and should the cloud side expose MQTT, HTTP, or both for telemetry and control? The main challenge is building a safe low-power controller that can read industrial sensors, drive a solenoid valve, and stay connected reliably in the field. A solid approach is to use an ESP32 or STM32 as the control core, add a cellular modem for secure telemetry, and structure firmware around sensor polling, alarm handling, watchdog recovery, and remote command validation. One key risk is false shutoff or missed shutdown caused by noisy inputs, modem dropouts, or power instability. That can be handled with hardware filtering, debounced state machines, safe default outputs, brownout protection, and a clear offline safety mode that always favors gas isolation. Can support the full path from schematic review through PCB bring-up, firmware integration, and prototype testing, with focused validation for power, connectivity, and actuator response. Next step would be to confirm interfaces, safety rules, and the exact cloud payloads so the PoC can be built cleanly and documented well. Best, Hlib
$1,250 USD in 3 days
2.4
2.4

Lagos, Nigeria
Payment method verified
Member since Oct 19, 2026
$750-1500 USD
€30-250 EUR
£1500-3000 GBP
$250-750 AUD
₹1500-12500 INR
€12-18 EUR / hour
₹600-1500 INR
₹1500-12500 INR
$10-30 USD
₹1500-12500 INR
€12-18 EUR / hour
$25-50 USD / hour
$25-50 USD / hour
$750-1500 USD
$250-750 USD
₹1500-12500 INR
₹1500-12500 INR
$10-30 USD
$1500-3000 USD
₹100-400 INR / hour
$30-250 CAD