Devam Ediyor

Embedded Video Hardware PCB

This is a video processing device. You can think it as a super

"Hard-Drive DVD Recorder" without a DVD drive, with hard drive.

(1) Inputs will be composite, and S-video. Inputs can be digital and

analog video signals (such as those from Camcorder, and VCR ).

(2) The inputted video signals need to be converted to MPEG-2 in

real-time, and then be saved to hard-drive.

(4) we will write a huge firmware to let user manage the video files through mouse, key-board and remote control.

(5) When user plays the MPEG-2 files via remote-control, it outputs

video signals through composite or S-video connectors. Recording and playing would happen at the same time.

(6) The device needs to have RF remote control sensor, key-board

connector, mouse connector.

(7) This device will conduct powerful work, so needs at least Pentium III 533MHz.

(8) we are thinking of using Windows XP embedded OS, please see

attached hardware board DOCUMENTs for circuit board SBC-GX533 from third party

(their design is for general purpose, needs to add video parts to meet

our need). I cannot upload the doc, please google for SBC-GX533.

(9) In short, your design should be something having the core capabilities of SBC-GX533, plus the inputs, outputs of DVD recorder.

(10) SBC-GX533 is used as an example of acceptable board core capabilities, but we need our own design from you.

(11) Ethernet is needed on this product.

(12) We are also open to using Linux instead of Windows XP embedded.

(13) We wish you deliver a fabricated product that is tested. We will pay material fees in addition to your quote here.

(14) This is proof of concepts prototype, so you are encouraged to use open sources.

(15) The quote would involve the following being provided:

(a) final schematic and layout file for PCB to be etched

(b) necessary documentation to back up the design, and essentaily

proof that it should work.

(16) Your work can be divived into 2 to 5 milestones, we will pay after each milestone is completed.

Additional information submitted:

(17) WE PUT A BUDGET of $1500 to 5000, but believe that for an experienced electonics engineer, it needs only to cost somewhere in the middle of 1500 to 5000.


(1) VCR is for viewing and recording video. Our device is for video management and that is why it needs mouse and key-board. It will be 20 to 100 times more powerful than a DVD recorder. It just needs regular remote control with, say, 20 some buttons.

(2) We will load a huge video management firmware into compact flash. All firmware and OS go into flash (so maybe a 2GB flash needed), all user video and data files go to hard drive.

(3) It wouldn't play and record at the same time. We need minimum pentium III 400MHz processor for intensive computation.

(4) It needs Ethernet accessibility.

(5) We are open to either Windows XP embedded, or Linux embedded.

(6) SBC-GX533 is too costly for mass production, and that is why ask for help here.

If you need more info, please do not hesitate to contact me.

Beceriler: Elektronik, Mühendislik

Daha fazlasını görün: embedded video hardware, freelance hardware project, sbc gx533, video only, video into, video do video, video do, video and production, to do video, rf circuit design, put in production, prototype upload, proof management, pcb hardware design engineer, pcb circuit board design, needs in video production, need engineer help, mpeg recording, minimum cost, milestone management, mass control 2, management concepts, google os, file processor, engineer's need

İşveren Hakkında:
( 1 değerlendirme ) Seattle, United States

Proje NO: #66205



I am very experienced engineer having some similar projects done in the past. Please take a look at your PM for more details and what is included in my offer.

30 gün içinde 3775$ USD
(0 Değerlendirme)

12 freelancer bu iş için ortalamada 3640$ teklif veriyor


Dear Sir, I'm interested on work with you in this project. We're an electronics [url removed, login to view] we can do this project with our [url removed, login to view] see pmb and start our [url removed, login to view]

in 45 gün içinde2500$ USD
(1 Değerlendirme)

Hello, Micro7c is ready to do the project; This proposal is for the first stage to study the project requirements, help in defining the project scope, searching for the perfect solution and software/hardware to be u Daha fazlası

in 30 gün içinde1500$ USD
(2 Değerlendirme)

Dear Sir, we can do the required done.

in 90 gün içinde4000$ USD
(0 Değerlendirme)

Please have a look at PM. Thanks

in 120 gün içinde5000$ USD
(0 Değerlendirme)

We are offered in your project again. Now our technical group considers{examines} your project in more detail. After that we shall give the final answer, the price and terms.

in 60 gün içinde5000$ USD
(0 Değerlendirme)

Dear Prospect, We are an IT services firm that has an Embedded Systems Division as well. If we understand your needs correctly you require both the device (prototype) & firmware? We are in the process of analysing y Daha fazlası

in 180 gün içinde5000$ USD
(0 Değerlendirme)

Dear Sir To reduce the complications and to get the components easily in the market, we recomend currently available intel motherboard with p4 processor. here all key board, mouse, ethernet options are available. fo Daha fazlası

in 30 gün içinde4000$ USD
(0 Değerlendirme)

We have a lot of specialized electronic Engineers , as well as Software engineers. For more information please see the details of our company.

in 40 gün içinde2000$ USD
(0 Değerlendirme)

Hello, TriozTechnologies India Pvt Ltd is ready to do the project;. We are an IT services firm that has an Embedded Systems Division as [url removed, login to view] we can do this project with our [url removed, login to view] see our website [url removed, login to view] Daha fazlası

in 30 gün içinde5000$ USD
(0 Değerlendirme)

Consider paying a little better price for the quality work. I am a senior IT professional with a lot of experience in similar kind of work Read my profile at [url removed, login to view] Daha fazlası

in 7 gün içinde3400$ USD
(0 Değerlendirme)

I am a senior engineer working in a reputed MNC. reading the specs you mentioned .earlier I have led a team which has done a similar project for LG. so I am confident that my team will be efficiently do the work with Daha fazlası

in 50 gün içinde2500$ USD
(0 Değerlendirme)