Kapalı

Engineering Stability Caclulation

I am building a table and need someone to work out a calculation to determine if the table will be stable.

The table design is here:

https://www.freelancer.com/contest/Drawup-the-my-rough-drawings-of-a-kitchen-table-into-correct-design-format-142501.html

The only other thing to mention is that the steel is regular 50*50 stainless steel and the benchtop is made of wood with a density of 1100 kg/m³.

What I really want to know is if someone (say 100kg) was to sit on the the most unstable edge/part of the table, is there a risk it will fall over?

Before you enter, I strongly encourage you to explain how (atleast the logic) of how you'd work it out.

To clarify - what I mean is that I will be checking the working or method/workings used to calculate it... That is unless you're putting it straight into a program, in which case, if you have a repultable program that is totally fine.

Beceriler: Mühendislik, Malzeme Mühendisliği, Fizik, Yapısal Mühendislik

Daha fazlasını gör: www freelancer m, structural design work, it engineering freelancer, https www freelancer com d, how was freelancer com made, how to enter a contest on freelancer com, how to design a kitchen, freelancer kg, drawings freelancer, c&m engineering, calculation logic, www engineering com, what is engineering, i want to design my kitchen, https m freelancer com, freelancer drawings, design contest 2015, structural-engineering, structural work, structural steel drawings

İşveren Hakkında:
( 72 değerlendirme ) Teneriffe, Australia

Proje NO: #7051466

Bu iş için 16 freelancer ortalamada $31 teklif veriyor

aminbros

regards, I've masters of science in civil engineering.. I can design the table for you as you want..

$20 USD in 5 gün içinde
(55 Değerlendirme)
6.3
dimitarpartenov

A proposal has not yet been provided

1 gün içinde %bids___i_sum_sub_32%%project_currencyDetails_sign_sub_33% USD
(65 Değerlendirme)
6.0
imrance08

Hi, I am searching your table picture but don't found. Please give me picture. I will send you result within some hours. Don't waste time.

1 gün içinde %bids___i_sum_sub_32%%project_currencyDetails_sign_sub_33% USD
(78 Değerlendirme)
5.7
bchandra1955

The moment about the line joint two support legs due to additional weight and all parts of table on this side must become greater than the sum of moment produced by all parts of table parts on the other side.......... Daha Fazla

1 gün içinde %bids___i_sum_sub_32%%project_currencyDetails_sign_sub_33% USD
(85 Değerlendirme)
6.2
StructuralWork

Dear I'm a structural engineer with large knowleadge and experience. Send me a message and I will give you both hand written and software report calculation for stress , stability and usability analysis. So you have fl Daha Fazla

$45 USD in 3 gün içinde
(15 Değerlendirme)
5.2
zubairbnabdullah

Hi. I am Msc/Civil Engineer. I am working as structural design Engineer since 2007 and i have designed a lot of buildings, Bridges and Hospitals and also prepared their design calculations. I have a lot of experience i Daha Fazla

$50 USD in 2 gün içinde
(20 Değerlendirme)
5.4
yadavom1990

Hi, The total Estimated cost that I have mentioned is not final cost. First let's discuss about your project then we can finalize the cost. I am having 2 years of experience in mechanical design in National Wind Daha Fazla

1 gün içinde %bids___i_sum_sub_32%%project_currencyDetails_sign_sub_33% USD
(33 Değerlendirme)
5.1
vahidinalibeg

Dear Sir, I'm structural engineer with 7 years experience and I can make all necessary calculations for your project. My calculation will be done in two part as follow: 1. calculation of stress in steel and wood m Daha Fazla

1 gün içinde %bids___i_sum_sub_32%%project_currencyDetails_sign_sub_33% USD
(10 Değerlendirme)
4.3
astrokex

I'l work out the calculation in SolidWorks. With all animations for you. Simple and visual. If you want to take into account some details, I'l just happy to help you with it.

$20 USD in 2 gün içinde
(1 Yorum)
0.4
Avinash5336

I have done several previous projects like this and to repeat the same task is not a big deal. Its merely a couple of hour job and considering the skills I possess, the output will be more effective and efficient.

1 gün içinde %bids___i_sum_sub_32%%project_currencyDetails_sign_sub_33% USD
(0 Değerlendirme)
0.0
hamzehalqaisi

Dear Sir, I have experience in automotive dynamic and stability design which is very similar to your product requirements. The concept of solving such a problem is by determining the center of gravity location incl Daha Fazla

$30 USD in 2 gün içinde
(0 Değerlendirme)
0.0
mhendi

your table stable but you must chick also.. 1- the connection between steel member ex. welding or bolts & connection strength. 2- the important thing you must check table wheels that Which will carry the load of tabl Daha Fazla

1 gün içinde %bids___i_sum_sub_32%%project_currencyDetails_sign_sub_33% USD
(0 Değerlendirme)
0.0
aerostructures

For stability (not statics) checks to be made for all loading scenarios for the side panels in shear , and the vertical supports in compresion. For that, depending on how you intend to use the product, please prov Daha Fazla

1 gün içinde %bids___i_sum_sub_32%%project_currencyDetails_sign_sub_33% USD
(0 Değerlendirme)
0.0
sandeep2485

I do these kind of calculations in my current job........................................................................

1 gün içinde %bids___i_sum_sub_32%%project_currencyDetails_sign_sub_33% USD
(0 Değerlendirme)
0.0
tangolung

B.S., M.S., MHKIE(STR) Ir. Chun Lung Chong I would be able to return the result to you within an hour. Please rate me and leave comment if you feel satisfy my service. According to the information you provide, o Daha Fazla

1 gün içinde %bids___i_sum_sub_32%%project_currencyDetails_sign_sub_33% USD
(0 Değerlendirme)
0.0
nicolasoyarzabal

Work Method: I will calculate the weight and center of gravity of the table using a CAD software (CATIA) and the material data you have provided, measure the lever arm length to the pivoting point and calculate the Daha Fazla

$15 USD in 2 gün içinde
(0 Değerlendirme)
0.0