Kapalı

expert needed mechanical engg Vibration Analysis

(a) Briefly describe the use of vibration measurement as a tool in condition monitoring of rotating machinery. Your answer should include:

• definitions of the quantities which can be usefully measured.

• the application to fault identification in rotating machinery.

• the typical transducer used for the task.

(b) A machine runs on rolling element bearings at a shaft speed of 3200 rpm. The bearings have the following characteristics: roller/race diameter ratio = 0.23, number of rolling elements 11, contact angle 0. The machine is classified as Class II for the purpose of assessment under ISO 2372.

• Assuming that the vibration can be described by a dominant frequency component of the form x(t) = A sin(2ft) calculate the vibration frequencies which would correspond to shaft and bearing faults occurring in this machine.

• Using the ISO 2372 table, estimate the range of acceleration amplitudes which should be measureable in order to record the bearing’s performance up to the ‘unacceptable’ threshold.

• If an accelerometer of sensitivity 100 mV/g is used to detect the vibrationestimate the maximum voltage amplitude which should be measureable.

(c) It is necessary to select an A/D converter to capture the vibration signals from the accelerometer. Using the results from part (b) above to estimate the required frequency range and frequency resolution of the measurement as well as the dynamic range of the data: specify

• A suitable resolution for the A/D converter,

• A suitable sampling frequency for the measurement,

• The number of samples that should be recorded for each spectrum

• Any other signal conditioning elements that may be necessary.

PLEASE REPLY as soon as possible

Beceriler: Kimya Mühendisliği, Mühendislik, Matematik, Makine Mühendisliği, Fizik

Daha fazlasını gör: php expert needed, joomla expert needed, web security expert needed, photoshop expert needed san jose, volusion expert needed, digg expert needed, linux expert needed, mod rewrite expert needed, zen cart expert needed, php web scraping expert needed, j2me expert needed, net graphics expert needed, clickbank expert needed, solidworks expert needed, expert needed, volusion website expert needed, mechanical engineering project vibration analysis, freelancer mechanical engineering academic vibration analysis, data analysis excel expert needed

İşveren Hakkında:
( 18 değerlendirme ) Delhi, India

Proje NO: #18986313

Bu iş için 4 freelancer ortalamada ₹2664 teklif veriyor

bchandra1955

Every question can be done in Rs 900/- all three in Rs 2500/- Professional engineer with 40 years of experience in Vibration and academic support

₹2500 INR in 5 gün içinde
(110 Değerlendirme)
6.3
jalileng

being mechanical engineer i believe i can do the job in a better way while ensuring the quality of project by the experienced personals.

1 gün içinde %bids___i_sum_sub_32%%project_currencyDetails_sign_sub_33% INR
(13 Değerlendirme)
4.6
krupal599

Neocent focuses on building strong customer relationships by providing exceptional service with integrity, honesty and fairness, while paying close attention to completion deadlines and budget requirements; along with Daha Fazla

₹5555 INR in 2 gün içinde
(14 Değerlendirme)
4.5
suraj12291

Hello, dear friend I am expert in physics. I have a lot of experiences in many projects. Please discuss for your task. Best regards.

1 gün içinde %bids___i_sum_sub_32%%project_currencyDetails_sign_sub_33% INR
(16 Değerlendirme)
4.0