Remote BMS Programmer Needed

@OutsourceMan

⭐⭐⭐⭐⭐ Thank you for sharing your detailed requirements. CnELIndia, led by Raman Ladhani, can fully support this project by delivering end-to-end BMS programming, integration, and HMI development. We have strong expertise with Schneider EcoStruxure and Siemens Desigo/PXC controllers, enabling us to remotely connect, configure logic, implement sequences, alarms, and optimization routines with clean, structured code. We can build a complete HMI/SCADA layer with trends, alarms, graphics, and dashboards, while integrating HVAC units, meters, chillers, pumps, and sensors through Modbus TCP/RTU and M-Bus. Our team can also implement energy-saving logic, COP calculations, kW-vs-TR reporting, and device validation. With deep HVAC and automation experience, clear documentation practices, and reliable remote collaboration, we can deliver a polished, tested, and fully functional solution.

@mesutgode

Hello I will not writing long AI texts . I am experienced automation engineer. You can check my portfolio and we can discuss details. Thank you

@ahmed4499

Hello Sir as i am computer engineer and i have master degree in engineering so may i can help you as i am expert in all scada projects . thanks

@cesur135

Building Automation and HVAC control is more than just a job to me - it's a craft in which I've meticulously honed my skill set over the years. With an adeptness in Schneider BMS (including EcoStruxure) and Siemens BMS (including Desigo / S7 / PXC), I have what it takes to connect directly to your controllers, write effective control logic, configure communication protocols, and develop impeccably functional HMI interfaces for real-time monitoring. Not only will I bring considerable remote experience that'll ensure smooth communication with your controllers, but my deep knowledge of Modbus TCP/RTU and M-Bus communications will undoubtedly be an asset in integrating field devices and organizing data effectively. Moreover, with numerous projects under my belt, I appreciate the importance of maintaining clean code and offering ongoing support which I intend to provide diligently. One area where I stand out is energy monitoring - understanding electrical parameters versus thermal load is second nature to me. This, coupled with my understanding of VRF, Chillers, AHUs, heat pumps, mechanical systems will enable me to generate comprehensive energy savings reports based on electrical consumption versus thermal output so that you can truly optimize your systems. You can trust me to be independent yet responsible, delivering complete working solutions while adhering to your engineering instructions. Harness my versatility for a successful project completion.

@Nehag510

As an accomplished Full Stack Developer with a profound understanding of Node, Express, Angular, React, and other relevant technologies, I have successfully completed diverse projects that involve the creation of complex backend systems, integrating APIs, and developing user-friendly interfaces. My broad experience also includes database management with MongoDB, MySQL, MS SQL Server among others. This amalgamation of tech skills enables me to perfectly comprehend and execute the objectives of your project. In addition to the outlined technical competencies, my proficiency with Mobile Application Development and RESTful APIs would be valuable in securing seamless communication and integration between your field devices and the BMS controller. Further highlighting my suitability for this task is my deep knowledge of Modbus TCP/RTU and M-Bus communications ─ skills critical for satisfactory project implementation. Moreover, given the remote nature of this opportunity, my clients' consistent commendation for delivering great work on time and working effectively without constant supervision underscores my adaptability to remote work environments. As a responsible self-starter who takes initiative even in ambiguous situations, you can count on me to deliver polished, well-tested logic even when working in isolation. I look forward to lending my skills to make a positive impact on your project's success!

@DylanZASA

Good day, I trust you are well. I offer expertise in Schneider and Siemens BMS programming and have strong skills in developing HMI/SCADA interfaces and energy monitoring solutions. While I am new to freelancer, I have a lot of experience in this field and have completed similar projects to yours recently. I understand the importance of remote configuration and troubleshooting of controllers, plus the need for reliable Modbus and M-Bus communications as outlined in your project. Your focus on creating an energy savings report using electrical consumption versus thermal output resonates strongly with my background. Could you clarify which specific chiller models or HVAC equipment you plan to integrate? Please feel free to reach out to me at your convenience to discuss your project in more detail.

@ThaiHocCanTho

I’ve programmed BMS logic for plant factory management systems and integrated heat pump design/maintenance workflows. Experienced with Schneider EcoStruxure & Siemens Desigo, I’ll deliver remote controller programming, Modbus/M-Bus integration, and polished HMI dashboards. $15/hr, available full-time, with clean documentation and tested energy optimization routines. Nguyen.

@rahulmer90

I am an experienced Building Automation and BMS programmer specializing in Schneider and Siemens systems. I deliver complete HVAC control logic, HMI/SCADA interfaces, Modbus and M-Bus integration, energy monitoring, reporting, and remote commissioning with clean code and full documentation.

@mohamedaminea1

Hello. Thanks for your job posting. I have delivered multiple BMS automation projects using Schneider EcoStruxure and Siemens Desigo/PXC, including a recent deployment of 142 HVAC field devices, 38 Modbus meters, and a full SCADA with 120+ dynamic graphics, achieving a 17% energy-efficiency improvement through optimized control logic. My approach includes: (1) securely connecting to your controllers and reviewing existing configurations, (2) developing structured sequences, alarms, and optimization routines, (3) integrating all HVAC and energy devices via Modbus/M-Bus with validated register mapping, (4) building a complete HMI/SCADA interface with trends, dashboards, and alarm workflows, and (5) generating internal energy-performance logic (kW vs TR, COP, efficiency). The most critical aspect of this project is ensuring clean, deterministic control logic tightly synchronized with accurate field-device data acquisition. To proceed efficiently, may I ask: Which controller family will we work on—EcoStruxure, Desigo, PXC, or S7? Do you already have existing sequences of operation or should I redevelop them from scratch? How many devices/meters must be integrated via Modbus or M-Bus? Do you prefer a web-based HMI, native SCADA graphics, or both? Hope to work for you. Best Regards...

@turuwhiska

Hi I am currently working in Austria with Siemens (Desigo / PXC), Schneider EcoStruxure, and KNX systems. I would be glad to receive more technical details regarding your BMS / HVAC integration requirements. If you are interested, feel free to message me. I also handle IoT and smart home integration, gateways, and multi-protocol communication (BACnet, Modbus, KNX, MQTT).

@adisonw

Dear sir I’m genuinely interested in your project and excited about the opportunity to collaborate. I’m eager to contribute and help you reach your goals. ✩ Brief introduction I have 5+ years of experience in building automation and BMS programming, working with Schneider EcoStruxure and Siemens Desigo controllers, HVAC integration, HMI/SCADA development, and energy monitoring for optimized building performance. ✩ Understanding of the project You need a remote BMS programmer to connect to Schneider or Siemens controllers, develop structured control logic, integrate HVAC and field devices, configure Modbus/M-Bus communications, and build a full HMI/SCADA interface for real-time monitoring, alarms, and energy optimization reporting. ✩ How I will do it I will remotely access your controllers via secure VPN, implement control logic and operational sequences, integrate all field devices, and develop dashboards with HMI/SCADA graphics. I will validate Modbus/M-Bus communications, implement energy monitoring and reporting, and provide clean, documented, and tested code for reliable operation. I’d love to chat more about your project needs and how I can help. Looking forward to working with you! Warm regards Adison

@dennissantiago09

Hello, I’ve been working as a Building Automation / BMS programmer with Schneider EcoStruxure and Siemens Desigo/S7/PXC controllers, handling exactly the mix of HVAC control, energy monitoring, and multi-vendor integration you’ve described. I’m used to connecting remotely over secure VPN, configuring controllers, and writing structured control logic including sequences of operation, alarms, optimization routines, and fallback strategies. On the HMI/SCADA side, I can build clear, intuitive graphics with navigation, trends, alarm management, and dashboards that make it easy for operators to see the status of chillers, AHUs, pumps, VRF systems, meters, and sensors at a glance. I work daily with Modbus TCP/RTU and M-Bus (mapping registers, validating data, troubleshooting comms), and I’m comfortable reading P&IDs and wiring diagrams to make sure all field devices are correctly integrated. I also have experience implementing energy KPIs inside the controller/HMI: kW vs. TR, COP/EER, and efficiency tracking, along with simple logic-driven reports so the client can see savings over time. My work style is independent and detail-oriented: I like to deliver complete, tested logic with clear comments, controller backups, and short documentation so your team can maintain and extend it later. If you’d like, I can start with a small remote task (e.g., a controller logic block or a single HMI page) so you can validate my approach before scaling up to a full site.

@SemShekh

Hi, Your project is interesting for me. Let me introduce myself. I'm individual web developer, 17+ years of experience. I have solid experience with NodeJs, .Net, C#, JavaScript, LESS, CSS3, HTML5, jQuery, CoffeeScript, TypeScript, ExtJS, Backbone, AngularJS, AJAX, Amazon s3 services, Azure. Fluent in English. Available 40 hours per week. Client oriented, details focused, flexible and passionate about learning new technologies. Responsible, self-organized, motivated, seventeen years of experience architecting and developing scalable web applications Strong problem-solving and analytical skills paired with a proactive mindset -Sem

@nenadt1

Hi there. I can work as a remote BMS programmer and build complete control logic, device integrations, and an HMI interface for your Schneider or Siemens systems with a clean and reliable setup. I have solid experience with EcoStruxure and Desigo controllers, writing structured logic, setting alarms, tuning HVAC sequences, and connecting field devices such as pumps, meters, chillers, and sensors. In a past project, I created full HMI screens with trends, navigation, and alarm views while integrating Modbus data and validating registers for stable operation. For your project, I will connect to your controllers, configure points, write the full control logic, and build clear dashboards for real time monitoring and control. I can handle Modbus and M Bus communications, energy reporting logic, and organize data so the system is easy to read and maintain. I will provide clean documentation, well arranged code, and ongoing support as needed so future updates are simple. Let’s chat to review the system layout and the controllers you want to start with. Best regards, Nenad

@hieuanhdo

Hi, I have experience with siemens software (Tia Portal, Wincc, step7). I have worked in automation for 5 years, Hope to connect with you for you project.