Tamamlanmış

GI Steel U-Profile FEM Model

Job Description:

Hi Freelancer,

I would like to analyze a 1.5mm thick GI Steel with loads shown in the screenshot. I would like to know what effect would having slot holes have on the U profile with the loadings described below and further information in the attached screenshot.

The U Profile is connected to a 120x60x3mm A36 Steel Box section. Connection to the Steel box section is through two self drilling screws on each side as shown in the photos.

Point load is exerted on the U profile as shown in the photos.

Maximum Uplift Load - 1.63KN

Maximum Downwards Load - 1.83KN

Please let me know if any further information is required. The material for the GI Steel can be considered as A36 Steel.

Thank you.

MH.

Beceriler: Makine Mühendisliği, Yapısal Mühendislik, Mühendislik, Sonlu Eleman Analizi, İnşaat Mühendisliği

Müşteri Hakkında:
( 1 değerlendirme ) Kuwait City, Kuwait

Proje NO: #35401515

Seçilen:

crashcoders

I am a Mechanical Engineer focused on 3D & 2D modeling, Simulation and Stress analysis. I have some good skills in mechanical design with CAD software (SolidWorks, FUSION 360, AUTOCAD, ANSYS & ABAQUS). Have done many Daha Fazla

1 gün içinde %selectedBids___i_sum_sub_4%%project_currencyDetails_sign_sub_5% USD
(0 Değerlendirme)
0.0

Bu iş için 25 freelancer ortalamada $151 teklif veriyor

sajjadtaghvaeifr

Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, Daha Fazla

$250 USD in 7 gün içinde
(82 Değerlendirme)
7.1
enghamza12

Hello Hamza ,I am detail oriented also I have the competence and professional experience that allow me to do a large amount of work efficiently. This includes receiving a super-professional education that includes int Daha Fazla

1 gün içinde %bids___i_sum_sub_32%%project_currencyDetails_sign_sub_33% USD
(190 Değerlendirme)
6.9
tuongeng4

Hi there ! I'm  Senior Structural Engineer . ⭐⭐⭐⭐⭐ ✅  I cheked and very interested with your project. ✅  I done many many project before relate to supply design calculation for approval and drawing fabrication. ✅  3d r Daha Fazla

$140 USD in 3 gün içinde
(71 Değerlendirme)
6.6
MohammedZamzam

Hello sir, I’ve read your project considering the need for an expert in structural engineering to help U with analyzing a 1.5mm thick GI Steel with loads shown in the screenshot I’m a civil engineer holding a master's Daha Fazla

$50 USD in 2 gün içinde
(50 Değerlendirme)
6.2
NguyenTran1010

Hi, Dear I have read your project description carefully. I am very excited to bid on your project. I am a mechanical engineer and have high skill of mechanical design based on FEA. I have strong skill of SolidWorks, Ab Daha Fazla

1 gün içinde %bids___i_sum_sub_32%%project_currencyDetails_sign_sub_33% USD
(36 Değerlendirme)
5.8
EslamWafdy

Hi there! I hope you are doing well. I have read and gone through your job requirements. I can do the required FEA analysis and provide perfect results. I can do the job as per your requirements. Please send me messag Daha Fazla

$150 USD in 2 gün içinde
(31 Değerlendirme)
5.5
engrhassanwali

Hello! I have completely read your requirements. I am Mechanical engineer and have 07 years of experience in FEA and CFD. So I have some important questions related to this and also have few suggestions. I am waiting f Daha Fazla

$250 USD in 7 gün içinde
(16 Değerlendirme)
5.5
shazemsaadHazem

Hi, My name is Hazem and I have a PhD in computational mechanics and materials. I have an excellent experience in FEM and would like to help you in tackling this problem. I promise to give excellent results in a very Daha Fazla

$140 USD in 3 gün içinde
(22 Değerlendirme)
4.9
ENGANS

Hello sir ... i am very interested in your project .. firstly i wonder why the u profile have slot holes While it is held by one screw on both ends, what is the use of the long holes?

$140 USD in 7 gün içinde
(1 Yorum)
3.5
TungMech

Hi , I have read your project carefully. I will FEA in Solidworks simulation Introduce me: I'm Mechanical Engineer (2D/3D modeling /CAD/CAM/CAE/FEA/CNC) I have professional skills in using the software: Autocad, Solidw Daha Fazla

1 gün içinde %bids___i_sum_sub_32%%project_currencyDetails_sign_sub_33% USD
(3 Değerlendirme)
2.3
Hamdy2008

Dear Sir, I hope all is going well with you. I’m an Experienced Structural Engineer with a good experience at steel and reinforced concrete structures design and detailing by using international codes and standards and Daha Fazla

$140 USD in 7 gün içinde
(4 Değerlendirme)
2.2
ArtaHovs84

Hi, I saw your project details. I am a 3D designer specializing in sketchup, revit, blender, 3d max and autocad. I use Sketchup, Levitt, and Autocad to design 2D and 3D buildings and interiors, and I use Blender, solid Daha Fazla

$140 USD in 2 gün içinde
(0 Değerlendirme)
0.0
ghayasa727

I have seen the details and I am Mechanical engineer and have experience in simulation, FEA and designs. Inbox me for further details as I need to ask some questions

$170 USD in 7 gün içinde
(0 Değerlendirme)
0.0
umerpdr313

Hello sir, nice to meet you. I have read your job description very carefully. I am very interested in your project. I think you will save time and money by choosing me. Please hire me. I would like to discuss y Daha Fazla

$50 USD in 3 gün içinde
(0 Değerlendirme)
0.0
marcuspov

Hi. I am very happy to bid your project I have just checked your project requirements so I can help you perfectly within 2days. I am a Professional Product Designer/Mechanical & Structural Engineer/FEA/. I have a lot o Daha Fazla

$100 USD in 2 gün içinde
(0 Değerlendirme)
0.0
mmahto

I have read your requirements well and it can be done, Send me your full requirements if any and I will send you exact quote. Thanks

$250 USD in 7 gün içinde
(0 Değerlendirme)
0.0
Deepak87k

Hello sir, I am an Aeronautical Engineer, i read the description about GI Steel U-Profile FEM Model so i will do analysis as per your requirements i will try my best to complete this project within your timelines Looki Daha Fazla

$250 USD in 7 gün içinde
(0 Değerlendirme)
0.0
Khaledmoh121

I can work on structural softwares and different structural systems such as precast and prestreased concrete steel structural systems

$140 USD in 7 gün içinde
(0 Değerlendirme)
0.0
oceantech27

I am pursuing my Phd in Mechanical Enginnering. So this problem comes well within my domain and I will be able to provide detailed solution for the same within the required time. Also i have my masters in stress and vi Daha Fazla

$200 USD in 5 gün içinde
(0 Değerlendirme)
0.0
DanielAven

Hello the proposal is the following. Using the finite element method, I will simulate the loads and deformations of the part. You can see the behavior and critical points. If you give me acceptable tolerances we can i Daha Fazla

$100 USD in 2 gün içinde
(0 Değerlendirme)
0.0