Cisco DNAC Rogue Detection Setup

@AmazingEngr76386

With my 10+ years of hands-on experience in computer security, network administration and engineering, you can be confident that I have the expertise required to successfully set up Cisco DNAC rogue detection for your Catalyst Center deployment. My familiarity with such projects will enable me to proficiently guide you through Catalyst Center's menus, policy settings, and thresholds needed to activate and optimize rogue-on-wire detection. To ensure your ability to reproduce the setup at other sites, I promise to provide you with thorough step-by-step instructions along with verification guidance for test event generation and confirmation of DNAC's capability to identify them. Moreover, I'll explain the necessary logs and reports that require monitoring once the detection system is active. Although full automated mitigation isn't within the project's scope at this stage, I’ll concentrate on delivering precisely what you require, using any remote access method convenient for you. Remember my commitment extends beyond completing the current project- I will also be here for long-term support and post-launch updates. So why not leverage my flexible approach, strong technical skills, and a personal touch in meeting deadlines and expectations for this crucial project? I'm standing by ready to bring my skills to work for you!

@Muhammadzeesha59

As a highly skilled and experienced network administrator with a focus on Cisco technologies for over 6 years, I am confident that I can complete this project to your utmost satisfaction. Given my background, I am adept at configuring policies and thresholds in DNAC to enable rogue-on-wire detection effectively. Furthermore, I can provide both a comprehensive walkthrough session and detailed step-by-step instructions that you can easily replicate in other sites. One of my key strengths lies in my ability to offer thorough verification guidance. I understand the importance of reliable test events to ensure the effectiveness of your DNAC setup. Guiding you through CLI commands, packet captures, or leveraging the built-in assurance tools within DNAC is definitely within my wheelhouse. Lastly, I will compile a report that explains the relevant logs and reports to monitor once the detection setup is active. My promise is not only technical competency but also efficient communication and commitment to customer satisfaction. Let's schedule a secure Webex session so we can get started ASAP. I very much look forward to the opportunity to add value to your project and ensure you have a strong rogue-on-wire detection system in place.

@trm66614

Hi there,Good morning I am Talha. I have read you project details i saw you need help with Linux, Network Security, Computer Security, Network Monitoring, Network Administration, Cisco and Network Engineering I am pleased to present my proposal, highlighting our extensive experience and proven track record in delivering exceptional results. Our portfolio of success will showcase past projects that demonstrate our ability to meet and exceed client expectations. Glowing testimonials from satisfied clients will attest to our professionalism, dedication, and the quality of our work Please note that the initial bid is an estimate, and the final quote will be provided after a thorough discussion of the project requirements or upon reviewing any detailed documentation you can share. Could you please share any available detailed documentation? I'm also open to further discussions to explore specific aspects of the project. Thanks Regards. Talha Ramzan

@Zawiya3

As an experienced data scientist and full-stack developer specializing in network administration, network engineering, and network security, I am well-equipped to handle your Cisco DNAC rogue detection setup project. My proficiency extends to every stage of the task; from a comprehensive understanding of Cisco Catalyst Center (DNA Center), to running diagnostics that would enable rogue-on-wire detection with precision. In fact, I've successfully executed similar tasks in the past with positive results for my clients. What sets me apart from other candidates is my capacity to generate test events through various techniques like CLI commands, packet captures, or using built-in Assurance tools. I can also provide all-encompassing written guidance, so you can easily replicate this setup across multiple sites. Having worked extensively with DNAC and Cisco Prime in the past, I firmly believe that my hands-on experience makes me a well-rounded fit for this project. Imagine receiving real-time email alerts and having all unauthorized devices promptly flagged on your dashboard - this can be your reality with my professional assistance. Moreover, I can also guide you on which logs and reports to keep an eye on post-activation of detection. I am more than willing to arrange remote access via secure sessions like Webex at your convenience. Choose me for a streamlined execution of your project that guarantees increased security levels for your wired infrastructure!

@brayanstiven5

Hi Sameer K.. I am very excited with your project because I have completed similar project recently. The skills required for your project are my main specialty.(Network Monitoring, Network Security, Computer Security, Network Engineering, Cisco, Linux and Network Administration) I can handle this perfectly and have abundent experiences. Please confirm that I am one of the best fits for you and drop me a message for further discussion. Thanks and Best Regards.

@Sidrairfan078

Hello,\n\nI see that you need expert assistance in setting up rogue-on-wire detection for your Cisco DNA Center deployment. With my extensive experience in network administration and Cisco technologies, I've successfully implemented similar configurations in past projects, ensuring robust detection of unauthorized devices. \n\nTo meet your requirements, I will provide a live walkthrough of the Catalyst Center interface, clearly showcasing how to adjust settings and thresholds for rogue detection. You'll also receive detailed written instructions that will allow you to replicate this setup at other locations seamlessly. Furthermore, I'll guide you through verification methods, including CLI commands and Assurance tools, to test the detection effectiveness. I will ensure you understand the necessary logs and reports to monitor once detection is active. \n\nI can schedule a session via Webex at your earliest convenience to dive into this. Let’s aim to have it set up within a few days. Looking forward to assisting you!

@marijos7

Hello Sameer K., I hope this message finds you well. I am excited about the opportunity to assist you with setting up rogue-on-wire detection on your Cisco DNAC deployment. Your project is crucial for maintaining the security and integrity of your wired infrastructure, and I have the expertise to help you achieve this efficiently. With extensive experience in Cisco network administration and security, I have previously configured rogue detection systems in similar environments. I understand the intricacies involved in enabling and fine-tuning the settings within DNAC to ensure that unauthorized devices are reliably flagged. My approach will include a comprehensive walkthrough of the necessary menus, policy settings, and thresholds to activate rogue detection. I will provide you with detailed written instructions so that you can replicate the setup across other sites if needed. Additionally, I'll guide you on how to generate test events and utilize CLI commands or packet captures to verify that DNAC is capturing them effectively. Furthermore, I will explain the logs and reports to monitor once detection is active. I am confident that my background in network security and monitoring aligns perfectly with your requirements. I'm looking forward to collaborating with you and ensuring that your network remains secure. Best regards, Marijo S.

@dragomira2

As a network engineer with a strong background in Cisco systems and network security, I am confident in my ability to deliver exactly what you require for your Cisco DNAC Rogue Detection Setup project. I have hands-on experience with Cisco Catalyst Center deployments and turning on the "rogue-on-wire" detection feature is an essential part of my job. I understand that you not only need the configuration but also detailed explanations and verification guidance. I assure you that I can provide you with a comprehensive live or recorded walkthrough inside the Catalyst Center, written step-by-step instructions, and all the necessary test events generation and confirmation processes. Furthermore, I'll ensure that you're well-versed in monitoring the logs and reports once the detection is active. My breadth of technical expertise spans across different programming languages, operating systems, databases, and even automation QA skills that gives me an edge when it comes to such projects. Additionally, my experience in network administration and monitoring extends to Cisco Prime deployments as well. With me, not only will you get the project done efficiently, but you'll also gain valuable insights into maximizing the capability of your Cisco DNAC.

@hassaan7766

Hi Sameer K., I understand you're looking to enable and fine-tune rogue-on-wire detection in your Cisco DNA Center deployment. This requires precise configuration to ensure that unauthorized devices are flagged appropriately and that alerts are effectively communicated via your dashboard and email notifications. I am a skilled network engineer with over 5 years of experience in Linux, Computer Security, Cisco, Network Administration, and Network Security. My expertise includes deploying solutions within Cisco DNA Center and Cisco Prime, which aligns with your project requirements. Here’s my portfolio for your review: https://www.freelancer.com/u/hassaan7766 I would be more than happy to provide a live walkthrough, detailed step-by-step instructions, verification guidance with test event generation, and an outline of the logs to monitor for optimal detection. Looking forward to discussing this further with you. Thank you, Regards, [Your Name]

@Yusrazubair1000

Hi Sameer K., Thank you for providing the details of your project regarding the Cisco Catalyst Center (DNA Center) deployment for rogue-on-wire detection. I'm confident that my experience with Cisco systems and specifically with DNA Center aligns well with your requirements. Below are my thoughts and a few questions to ensure that we cover everything you need: 1. **Live or Recorded Walkthrough**: I can provide a comprehensive walkthrough demonstrating the necessary menus, policy settings, and thresholds to enable rogue-on-wire detection effectively. 2. **Step-by-Step Written Instructions**: I will create detailed written instructions that will enable you to replicate the setup across different sites without any difficulty. 3. **Verification Guidance**: I can guide you on generating test events and confirming that DNA Center is catching them effectively using various methods, including CLI commands, packet captures, and the built-in Assurance tools. 4. **Monitoring Logs and Reports**: I will explain the key logs and reports you should keep an eye on once rogue detection is active, ensuring you have everything under control for ongoing monitoring. ### Questions: 1. Are there any specific versions of the DNA Center or Catalyst hardware that I should be aware of? 2. Do you have existing configurations in place that I should take into account while setting this up? 3. What is your preferred timeline for completing this task, and are there specific times that work best for you for the live or recorded walkthrough? ### Why Choose Me? - Extensive experience with Cisco DNA Center and Prime

@elhaquilamyaa

Hello, I can help you fully enable and fine-tune Rogue-on-Wire detection in your Cisco Catalyst Center (DNA Center) deployment, with clear documentation and verification steps. Here is what I will deliver: Live or recorded walkthrough A detailed screen walkthrough inside Catalyst Center showing: Where to enable Rogue & aWIPS How to activate rogue-on-wire detection Classification thresholds and tuning options Event/alert configuration workflows Step-by-step written guide (DOCX / Google Docs) Complete reproducible instructions for: Enabling rogue-on-wire detection Adjusting sensitivity and allowed-lists Setting up event notifications Applying the same config on other sites Verification & testing procedures How to generate test rogue-on-wire events Switch CLI commands to confirm wired presence How to view the events in Assurance → Rogue & aWIPS Troubleshooting false positives Log & reporting guidance Clear explanation of which DNAC logs, dashboards, and threat views to monitor. Delivery time: Within 24 hours Availability: Ready to start immediately Remote access: Webex, AnyDesk, or your preferred secure method I have hands-on experience with Cisco Catalyst Center deployments and rogue detection tuning, and I can provide clean, professional documentation with screenshots. Looking forward to working with you.

@KanzahAfaqAhmad

Hi Sameer K., I understand that you are looking to establish and fine-tune rogue-on-wire detection within your Cisco Catalyst Center, ensuring that any unauthorized devices are flagged within your wired infrastructure. I can assist you with a comprehensive walkthrough of the DNAC configuration, which includes policy settings, thresholds, and monitoring guidelines. I am Kanzah Afaq, with over 7 years of experience in Linux, Computer Security, Cisco technologies, Network Administration, Security, Engineering, and Monitoring, specifically with Catalyst Center deployments. Here are a few relevant cases from my portfolio: - [Link to portfolio 1] - [Link to portfolio 2] I can ensure you have detailed step-by-step instructions and verification guidance for generating test events, alongside insights on monitoring logs and reports post-activation. I look forward to discussing this project further with you. Thank you, Regards, Kanzah Afaq

@udaym112

Hello, This is Uday, am a senior network engineer. Earlier i worked with Adobe and Google, where i worked on Cisco wireless migration from Cisco 5500 controllers to Cisco 9800 controllers and moved wireless dashboard from Cisco prime to Cisco DNAC. Worked on creating heatmaps, AP provisioning, Creating Policies, AP rogue detection(Rogue on wire, Honeypot, Rogue Impersonation). During the DNAC migration worked with Cisco BCS(Cisco Business team) and raised Cisco BUGs that indicates some issues related Rogue APs. I have gone through the project details, I can help you with creating policies on detecting Rogue on wire Aps instead of false alerts. Can explain you how to view these alerts and silence the unnecessary/friendly aps.

@MirzaWaqas302

With the experience of 5 years configuring Cisco DNA Center and wired security, I will enable and fine-tune rogue-on-wire detection so your DNAC reliably flags unauthorized devices and surfaces events to the dashboard and e-mail. Deliverables: a live or recorded walkthrough showing exact DNAC menus, policy settings and threshold changes; a step-by-step playbook you can apply site-by-site; verification guidance (test event generation, CLI commands, packet-capture steps and Assurance checks); and a concise log/report monitoring guide. I will not apply automatic mitigation unless you request it. I can perform the work via Webex — provide DNAC admin access and a convenient window and I’ll proceed.