Windows OpenVPN RDB Setup

@gattes

Hi there, I have over 10 years work experience with Linux, Windows and VPN setups (wireguard, OpenVPN, etc) like these and I think I can definitely help you out. Ping me! Cheers

@android2014213

Hi There, I can help you to setup Openvpn with Remote Access Database. I am interested to start this project now. Thanks Ashish A.

@zulqrn

Hi there, I’m a System and Network Engineer with strong hands on experience in OpenVPN deployments on Windows Servers. I would like to assist you. Please let me know a good time to discuss. Thanks

@loxtic

Hello, how are you doing? I have considerable experience setting up OpenVPN on Windows servers, including CA and client profiles, routing, DNS push, and firewall hardening, with automated startup and clean, documented steps for user management. I’ve deployed several VPNs for remote access with compact, easy-to-follow setup guides, and I can provide a test run to confirm authentication, IP assignment, and internal reach. Let me know further if interested.

@koolvishruth

Hello Sir, I am IT professional with over 7 years of proven expertise, I not only possess the knowledge and skills to fulfill your specific OpenVPN deployment needs but the experience that you can most certainly rely on. My robust background encompasses an array of key skillsets in Linux which points to my familiarity with network administration and security, two vital components of your project. Let’s connect

@jayantkumar314

I can set up and harden OpenVPN on your Windows server for up to 10 remote users, including certificates, client `.ovpn` profiles, routing, DNS push, firewall rules, auto-start service, and full internal-network access for resources such as RDP and file shares. I’ll verify the connection end-to-end from a test client and provide clear documentation showing how to add, revoke, and manage users later. I can start immediately.

@longngoc2307

==== Hi - Truong here ==== "WINDOWS OPENVPN REMOTE NETWORK ACCESS" — you need ten remote users to work as if they were physically on the internal network, with secure routing and simple user management. I’d configure OpenVPN on the Windows server with individual client profiles, certificate-based authentication, pushed DNS/routes and Windows Firewall rules limited to the required VPN traffic. I’d then test an actual client against internal file shares, RDP and other resources rather than stopping at successful VPN authentication. I’ll also document the exact process for adding and revoking users, including what needs to be changed when a profile is compromised. Should the VPN clients access the entire internal subnet, or only specific servers and services? Looking forward to work with you

@najibe1

Hi, I have 20+ years of experience with Windows Server, networking, VPNs, firewalls and secure remote access. I can deploy and harden OpenVPN on your Windows server, create the CA/server certificate and 10 individual client `.ovpn` profiles, configure routing, DNS, Windows Firewall and internal network access. I’ll test authentication, IP assignment and access to internal resources such as RDP, file shares and business applications. I’ll also provide clear documentation covering user creation, revocation and future maintenance. I can start immediately and work within your deadline.

@Hrolgar

OpenVPN's TLS-Crypt handshake adds a layer most Windows setups skip, and it's the difference between a VPN endpoint that survives a scan and one that gets probed on port 1194 within the hour. That plus split-tunnel DNS push (so internal hostnames resolve without leaking every lookup out the tunnel) is really the whole job here. Running gluetun and OpenVPN in my own homelab day to day, I've done exactly this shape of setup more than once: single entry point, push routes for the internal subnet, DNS handed out through the tunnel rather than falling back to public resolvers, and firewall rules scoped so file shares and RDP are reachable but nothing else on that server is exposed. AES-256-GCM plus TLS 1.2 minimum gets the cipher suite where it needs to be without breaking older RDP clients. For 10 concurrent users the main thing to lock down early is the client cert setup so revoking one user doesn't mean touching the other nine, and getting the routing table right so remote traffic doesn't accidentally tromboneback out to the internet. I'll set up the OpenVPN service, configure routing and firewall rules for full internal reachability, harden the TLS config, and get DNS pushing correctly to your internal resolver. Handover is a screen recording walking through adding and revoking users plus the config file annotated so it's not a black box. M1: OpenVPN install, server cert/CA setup, base config, $182, 1 day. M2: Routing, firewall rules, DNS push, TLS hardening, $220, 1 day. M3: Client testing with sample users, handover recording and docs, $148, 1 day. The 550 covers what's in the brief as written, but if there's an existing firewall or AD setup that needs specific rules carved out, or the LOB apps have odd port requirements, that could add a bit of time. Send me the current network layout (subnet, DNS setup, any existing firewall rules) and I'll firm up the number before I start.

@raphaelokekeze

Hi, Windows firewall profiles often block routed subnet traffic by default once the TUN/TAP adapter initializes, so I always explicitly configure the routing table and interface metrics before touching the service config. I regularly spin up OpenVPN Community builds on Windows Server for remote teams, and I will handle this by installing the current stable release, generating the client certificate authority, and configuring the pushed routes so your ten users get clean access to the internal network without split-tunnel leaks. For $250, delivered in 1 day, you get the complete installation, client profile generation, routing verification, and brief documentation covering how to add future users. Shall I set up the server using the Community edition or do you prefer the Access Server interface?

@ASSAMWEB

Greetings, I have reviewed your project description and recently worked on a similar project: ”VPN Exit Node”. I believe I can help you deliver this successfully. Let’s open a chat to discuss your requirements in detail and determine the best approach for your project. Regards

@engruhulajom

Hello There! I’m Md Toriqul Islam, an experienced full-stack developer with 10+ years of experience, and I can start your OpenVPN deployment immediately. I understand you need a secure Windows-based OpenVPN server supporting up to 10 remote users with full internal-network access. I can configure the VPN service, PKI certificates, individual client profiles, routing, DNS push, Windows Firewall, TLS hardening, automatic startup, and secure user management. I’ll verify authentication, assigned VPN IPs, and access to internal resources such as RDP, file shares, and business applications before handover. I am skilled in Linux, Windows, networking, VPNs, security, Docker, and server infrastructure. Please share the Windows Server version and network subnet details. Looking forward to hearing from you. Best regards, Md Ruhul

@ridwaan6254

A clean, documented OpenVPN deployment for ten users is a well-defined job, and the two things that make it good rather than merely working are security and the documentation - both of which most quick setups skip. On the build: I would install a current OpenVPN, and I would recommend Community over Access Server unless you actually need the paid admin UI, since for ten users the Community edition does everything and saves the licence cost - I will say which fits once I know how you want to manage users. Each user gets their own certificate rather than a shared key, so access can be revoked per person if someone leaves or a laptop is lost, which a shared secret cannot do. Routing set so connected users get the full seamless access to the internal network you need, with the firewall opening only what is required. On security, which matters because this box becomes your single entry point: strong cipher and auth settings rather than defaults, the certificate authority kept off the public-facing box where practical, and sensible logging so you can see who connected and when. And the documentation you asked for, done properly: how to add and revoke a user, how to reissue a certificate, and how to check it is healthy - so you are not dependent on me for routine changes. I run production servers, so this is operational work I do rather than theory. What Windows Server version, and do users need the whole network or just specific services?

@elijahhmonreal

Hi there, Setting up a robust Windows OpenVPN deployment with seamless internal network access is exactly what I specialize in. As a Network Security Engineer with 12+ years of infrastructure and VPN experience, I've deployed secure remote access solutions for organizations across finance, healthcare, and tech sectors. I'll handle everything end-to-end: OpenVPN Community Edition installation with auto-start, PKI setup (CA, server cert, 10 client profiles), routing configuration, DNS push, and comprehensive Windows firewall hardening with TLS cipher optimization. Your remote users will authenticate, receive internal IPs, and access file shares, RDP, and LOB apps seamlessly, exactly as if on-site. I'll thoroughly test connectivity with a sample client, then provide clear step-by-step documentation and screen recordings so you can independently manage user additions and revocations going forward. Let me know if my profile looks interesting, and we can set up a time to talk. Best regards, Elijah M

@MSaadJaved

Hi, I’ll set up a clean Windows OpenVPN gateway with auto-starting service, 10 bundled client .ovpn profiles, and full LAN reachability for file shares, RDP, and internal apps. The main technical concern here is getting routing, DNS push, and Windows firewall rules aligned so clients behave like they’re on-site, so I’ll verify each hop end-to-end and harden the TLS/key settings. I recently configured a similar remote-access VPN on Windows where I handled certificate generation, client provisioning, and split/full-tunnel routing with documented handoff. For your project, I’d begin by reviewing the subnet, gateway, and DNS details, then install and configure the server, test a client login, and confirm access to internal resources. Will you prefer OpenVPN Community or Access Server if both fit the host and admin workflow? Best regards, NexLoom

@manh2906

Hi, there. "WINDOWS OPENVPN RDB SETUP" — you need secure remote access that works like an internal network connection. I would install and configure OpenVPN on your Windows server with certificates, client profiles, routing, DNS push, and firewall rules so remote users can access internal resources smoothly. I would also harden the setup with secure TLS settings and only expose the required services. I would test with a client profile to confirm authentication, IP assignment, internal access, and stable connectivity before handover. I would provide clear documentation showing how to add or revoke users and maintain the VPN later. Do you already have the internal subnet and DNS details ready, and should remote users access all internal resources or only specific services? Looking forward to working with you.

@AndrewJSMAN

I've deployed OpenVPN on Windows servers before, so this is right in my wheelhouse. I'll install OpenVPN Community, set up auto-start, generate CA, server cert, and 10 client profiles. Routing, firewall, and DNS push will be configured to mirror on-site access. I'll harden TLS, enforce strong ciphers, and lock down Windows Firewall. A concise doc will cover user management. Once you provide RDP and network details, I can validate connectivity and internal access. Thanks, Andrii.

@Jennycreation

With over 17 years of experience in system administration, primarily working on Windows-based platforms, I am confident that I can successfully meet and exceed your project requirements. My expertise leans heavily towards set up and optimization of services on Windows systems, making me an ideal candidate for your OpenVPN deployment needs. Understanding the criticality of your project, I guarantee a clean and efficient OpenVPN installation on the server, configuring it in a way that ensures seamless access to your internal network for all ten remote users. My meticulous approach to setting up VPNs involves generating the necessary certificates and profiles, configuring routing and firewall rules, and pushing DNS for easy access to all network resources ensuring robust security with suitable TLS cipher settings and key sizes while permitting only essential ports through the Windows Firewall. I'm well aware of the importance of documentation. Therefore, apart from providing you with a fully-functional VPN setup, I'll also deliver a concise yet comprehensive guide or screen recording to help you add or revoke users independently in the future. By choosing me to be a part of your project, you're enlisting the services of a seasoned professional determined to not just meet the expectations but exceed them in ensuring your complete satisfaction.

@StaceyG23

I DON'T COMPETE ON PRICE. I COMPETE ON RESULTS. I won't waste a second of your time with an AI response, as I'm sure you're already bored of it. So lets talk with facts, actions and implementation. We will help you achieve a secure, seamless OpenVPN deployment that ensures remote users have reliable access to your internal network. Your requirement for a clean, well-documented setup is clear. I understand the importance of having a system that allows for full access to internal resources like file shares and RDP sessions. I have extensive experience with OpenVPN installations on Windows servers, including configuring routing, firewall rules, and DNS settings. I also focus on hardening servers to ensure peak security. I would love to discuss your upcoming projects with you and answer any questions you may have. Kind Regards, Stacey