
Closed
Posted
Paid on delivery
# Request for Complete Micro-Robot Engineering Design & Manufacturing Files **Project:** Big Hero 6-Inspired Modular Micro-Robot **Maximum Total Budget:** KRW 500,000 (approximately USD 350–370, depending on exchange rates) Hello, I am looking for an experienced robotics, mechanical, and electronics engineer to design a fully functional miniature modular robot inspired by the microbots featured in the movie *Big Hero 6*. I am not looking for a concept design or visual 3D model only. I need a complete, manufacturable engineering package that can be sent directly to PCB manufacturers and mechanical fabrication companies. My goal is to manufacture **as many fully functional robots as possible within a total budget of KRW 500,000**, including engineering design, components, manufacturing, and charging equipment. ## 1. Robot Design The robot should have: - A small, approximately spherical central body. - Two elongated wing-shaped arms extending from opposite sides. - A compact, lightweight design. - An optimized internal arrangement for the battery, PCB, motors, sensors, and mechanical components. - The smallest practical dimensions without compromising the required functionality. Please recommend the minimum feasible size based on actual component dimensions and mechanical constraints. ## 2. Required Functions **A. Independently Controlled Arms** - Two independently controlled robotic arms. - Adjustable arm angles and positioning. - Two-axis directional movement per arm, if mechanically feasible. - A target of 360-degree rotational capability, subject to mechanical limitations. - Ability to stop and hold the arms at commanded positions. - Independent motor control through software. **B. Forward and Backward Movement** - A compact internal rotating-mass or reaction-wheel-based movement mechanism. - The robot should be capable of moving or rolling forward and backward. - Please evaluate whether the proposed movement mechanism is physically feasible. - If necessary, recommend a more practical movement mechanism while preserving the intended external appearance. **C. Robot-to-Robot Connection and Separation** - Multiple robots must be capable of physically connecting. - The robots should also be capable of separating. - Connection points should be considered at the central body and arm tips. - Support for different connection configurations, including straight-line and T-shaped arrangements. - Electrically controlled docking and release mechanisms are preferred. **D. Relative Position Detection** - Robots should be able to detect or estimate the relative positions of nearby robots. - Distance and orientation estimation for docking. - Appropriate sensors and wireless communication systems. - Please explain the achievable accuracy and limitations. **E. Charging System — Mandatory Specification** The charging method must use **2-pin Pogo Pin spring-contact charging**. Requirements: - Internal rechargeable Li-Po battery. - Dedicated charging dock with Pogo Pin contacts. - Automatic electrical charging connection when the robot is placed correctly on the dock. - Integrated charging and battery protection circuitry. - Battery status monitoring. - Reverse-polarity protection or mechanically keyed contacts. - No USB-C charging port on the robot itself. The charging dock must also be included in the engineering design package, including PCB, CAD, STEP/STL, Gerber files, and manufacturing documentation. **F. Bluetooth and Computer Connectivity** - Bluetooth communication with a PC. - Wireless control of individual robots. - Independent arm movement control. - Forward and backward movement commands. - Communication with multiple robots. - Real-time transmission of sensor readings and robot status. **G. Programming and Real-Time Control** - Programmable microcontroller. - Firmware source code. - Python-based PC control interface or equivalent. - Real-time motor control. - Live sensor data monitoring. - Battery status and connection monitoring. - Documented communication protocol. - Ability to send commands to individual robots. ## 3. Required Engineering Deliverables **PCB and Electronics** - Complete circuit schematic. - Editable PCB design files. - Gerber and drill files. - Bill of Materials (BOM). - Pick-and-place files. - PCB assembly documentation. - Battery charging and protection circuits. - Motor driver and wireless communication circuitry. **Mechanical Engineering and CAD** - Complete parametric 3D CAD model. - Editable native CAD source files. - STEP and STL files. - Individual mechanical part drawings. - Manufacturing tolerances and dimensions. - Complete assembly and exploded views. - Arm joint mechanisms. - Movement mechanism. - Robot docking and separation mechanism. - Mechanical interference and clearance analysis. **Component Procurement** Please provide a complete component list containing: - Exact manufacturer part numbers. - Supplier purchase links. - Quantity per robot. - Individual and total component costs. - Physical dimensions and relevant specifications. - Current stock availability and expected lead times. - Suitable alternative parts in case of shortages. Please prioritize components that are readily available and not discontinued. **Software** - Complete microcontroller firmware. - PC control software. - Bluetooth communication implementation. - Real-time control and monitoring functionality. - Source code and installation instructions. ## 4. Manufacturing and Engineering Validation All deliverables must be suitable for real-world manufacturing rather than visualization alone. Please evaluate: - PCB manufacturability and assembly. - Internal component placement and clearances. - Motor torque and power requirements. - Battery capacity and estimated operating time. - Joint movement limitations. - Physical feasibility of the rolling mechanism. - Docking mechanism feasibility. - Expected manufacturing cost. - Mechanical and electrical integration. Please clearly distinguish between simulated or analytically validated features and features that have been physically tested. ## 5. Budget Optimization and Maximum Production Quantity **The absolute total budget limit is KRW 500,000.** This budget must include: - Engineering and design fees. - PCB fabrication and assembly. - Electronic components. - Mechanical manufacturing. - Charging dock. - Other essential manufacturing expenses. My priority is to produce **the maximum possible number of fully functional, identical robots within this budget**. Please: 1. Minimize the manufacturing cost per robot without removing essential functions. 2. Use standardized PCB and mechanical designs suitable for multiple units. 3. Consider PCB panelization, bulk component purchasing, and economical fabrication methods. 4. Calculate the actual estimated manufacturing cost per robot. 5. Provide cost comparisons for manufacturing 1, 3, 5, and 10 robots. 6. Calculate the maximum number of robots that can be manufactured within the total budget. 7. Ensure all robots can communicate and physically connect with one another. 8. Include the charging dock and engineering fees in the total budget. If the full requirements cannot realistically be achieved within the budget, please explain the technical limitations and provide a cost breakdown before proposing any changes. **Please do not remove or downgrade mandatory features without my approval.** ## 6. Final Delivery Requirements The final package should contain all editable design files, manufacturing files, firmware, software, BOM, assembly instructions, and technical documentation. The files should be suitable for submission to PCB fabrication and assembly services and mechanical manufacturing companies without requiring major redesign. I would also like ownership and modification rights to the final custom design deliverables, subject to agreement. ## 7. Questions Before Starting Please let me know: 1. Can you realistically design this robot with the requested functions? 2. What is the smallest practical robot size? 3. How much would the engineering work cost? 4. What is the estimated manufacturing cost per robot? 5. How many robots could be manufactured within KRW 500,000, including all expenses? 6. How long would the design process take? 7. Which manufacturing-ready files will you deliver? 8. Will design corrections be included if the manufacturer identifies fabrication issues? I am looking for a practical, cost-optimized, fully manufacturable design rather than a conceptual model. Thank you. I look forward to discussing the feasibility, timeline, and quotation.
Project ID: 40761761
19 proposals
Remote project
Active 1 day ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
19 freelancers are bidding on average $80 USD for this job

Hello, I can help design the robot’s electronics and custom PCBs, including the microcontroller, motor drivers, Bluetooth communication, battery management, and 2-pin Pogo Pin charging dock. I can also support the mechanical integration and manufacturing documentation, including component selection, BOM, Gerber files, and 3D CAD exports. However, the complete requirements—including two-axis arm control, active docking and release, relative positioning, and a functional movement mechanism—are ambitious for a total budget of KRW 500,000, including engineering, manufacturing, and components. I recommend starting with a feasibility study and cost breakdown to determine the minimum practical size, motor and battery requirements, and realistic production quantity before finalizing the design. I would clearly distinguish analytically validated features from those requiring physical prototyping and testing. Could you confirm whether the KRW 500,000 budget is fixed for both engineering and manufacturing, and whether you would accept a phased development approach? Best regards
$83 USD in 7 days
5.6
5.6

Hello, I understand the main challenge is integrating independently controlled arms, multi-robot docking, relative-position sensing, Bluetooth control, and pogo-pin charging into a compact, manufacturable robot while respecting the strict total budget. I would approach this through component-level feasibility analysis, mechanical and PCB integration, power and motion evaluation, and a costed BOM, clearly separating validated engineering from features that still require physical testing. I have worked on similar mechanical product design and prototype development projects and can share relevant examples once we connect in chat. Also a quick question, is the KRW 500,000 budget fixed to include engineering fees and manufacturing, or is it intended for manufacturing costs alone? Best Regards, Muskan
$70 USD in 1 day
5.5
5.5

Hi, I am an embedded systems engineer with over 16 years of experience. I have extensive experience taking compact electromechanical products from concept through electronics, mechanical integration, firmware and production. I can assess feasibility and develop the design, but I cannot promise the full engineering package and multiple functional robots within KRW 500,000. My $95 bid covers a 7-day feasibility and costing phase. Full engineering would require a separate quotation. I would establish minimum size from actual components, evaluate arm motion, rolling, docking and sensing accuracy, and include the mandatory 2-pin Pogo Pin dock, battery protection and Bluetooth/Python controls in the assessment. I would provide a preliminary BOM and itemized estimates for 1, 3, 5 and 10 units, including engineering and charging equipment, to assess the affordable quantity. Any changes to mandatory features would require your approval. For the full design, I can deliver editable PCB/CAD sources, Gerber/drill files, STEP/STL, assembly drawings, firmware, PC software and documentation. Fabrication corrections would be included in the agreed scope, and analytical validation would be clearly distinguished from physical testing. What target diameter and minimum robot count do you need? Please contact me to discuss details.
$95 USD in 7 days
5.3
5.3

Hi, I’ve carefully reviewed your requirements, and I understand that you need a fully functional, manufacturable modular robot, not just a 3D model. I can help with the electronic design, custom PCB, motor control, power management, and charging system. I would first evaluate the mechanical feasibility, docking mechanism, and component costs to develop a practical solution. Before starting, I have two questions: - Do you have a preferred maximum robot size? - Do you already have any mechanical concepts or reference designs for the arm joints and robot docking mechanism? I can provide editable design files, manufacturing files, BOM, and technical documentation, with corrections for my design errors included in the agreed scope. Best wishes, Ahmed Yahia
$83 USD in 7 days
4.6
4.6

Hello, I understand that the main challenge is integrating independently controlled arms, rolling locomotion, modular docking, Bluetooth communication, and pogo pin charging into a compact, manufacturable robot while respecting strict component and mechanical constraints. I would approach this by validating the movement mechanisms, motor torque, component dimensions, power requirements, and docking interfaces before finalizing the parametric CAD, PCB layouts, firmware, and manufacturing documentation. The key is identifying which functions are physically feasible together without compromising the required specifications. Also a quick question, is the spherical body required to roll using an internal reaction wheel, or would you consider an alternative mechanism if testing shows the reaction wheel cannot provide reliable directional movement? Best Regards, MadTech
$70 USD in 1 day
4.2
4.2

Hi, I can help develop a practical micro-robot engineering design covering PCB layout, mechanical CAD, Bluetooth control, firmware, and Pogo Pin charging. I’d first assess component dimensions, movement and docking feasibility, and manufacturing costs to determine what can realistically be achieved within KRW 500,000 before finalising the design and timeline.
$95 USD in 2 days
3.4
3.4

I’d love to dive into the nitty-gritty details of your project. When would you be available for a short, free consultation? It’ll help ensure everything is done right. One likely challenge could be balancing the robot's functionality with the tight budget. If the design isn't optimized, it might lead to overspending or functionality issues down the line. To tackle this, I'll focus on selecting cost-effective components and efficient designs. This way, I can help you maximize the number of fully functional robots within your budget. I’ll also ensure the design meets all your requirements while keeping manufacturing feasible. I’ve worked on similar projects before and revisions are always welcomed until you’re completely satisfied. Let’s make sure this robot is everything you envision!
$70 USD in 7 days
3.6
3.6

Hello, I can help turn your micro-robot concept into a manufacturable design, covering electronics, PCB layout, mechanical CAD, firmware, and Bluetooth control. I would start by developing a compact architecture around the ESP32, miniature actuators, battery management, and modular docking interfaces. I would pay particular attention to arm positioning, mechanical clearances, reliable robot-to-robot connections, and the required 2-pin Pogo Pin charging system. I can deliver editable KiCad files, Gerbers, BOM, assembly files, parametric CAD, STEP/STL models, firmware, PC control software, and manufacturing documentation. My approach is to validate the mechanical and electrical interfaces early, identify practical limitations in the movement mechanism, and optimize the design for assembly and future replication. I would be glad to review your existing specifications and develop a clear engineering plan with milestones, deliverables, and manufacturing estimates. Best regards
$83 USD in 7 days
3.5
3.5

Hello, The core challenge is integrating independently controlled arms, robot-to-robot docking, wireless positioning, and pogo-pin charging into a miniature platform while keeping the design manufacturable and the total system cost within a very restrictive budget. Our team can help develop the mechanical CAD architecture, component layout, PCB design documentation, BOM, and software integration plan. However, the full specification combines several demanding subsystems, and the KRW 500,000 limit must be evaluated against engineering, fabrication, components, and charging equipment before the feasibility or production quantity can be established. We would distinguish analytical validation and simulation from features confirmed through physical testing. The engineering package can be structured around editable CAD, STEP/STL, PCB source files, Gerbers, assembly drawings, firmware, PC control software, and manufacturing documentation, subject to confirming the feasible architecture and component selection. Also a quick question, would you consider a staged feasibility study that evaluates the complete mandatory feature set and identifies its actual cost and size constraints before committing to the manufacturing design? Best Regards, GridSmithLTD
$70 USD in 1 day
3.7
3.7

Hello! We at HardFault are excited about your Big Hero 6-inspired modular micro-robot project. Our extensive background in creating custom PCBs and embedded hardware design, especially within cost-sensitive constraints, aligns well with your goal of maximizing production within your budget. Our expertise with complex IoT connectivity and real-time motor control, coupled with a team proficient in both hardware and software, allows us to deliver quickly and ensure robustness, something individual freelancers might struggle to match. We can tackle this project by developing a compact, manufacturable design using widely available components to keep costs low and efficiency high. We’re ready to dive into the architectural planning to start aligning your requirements with feasible engineering solutions. How precise is your current bill of materials in terms of available component costs which would help us tailor a more accurate production strategy?
$93 USD in 25 days
3.1
3.1

Hello, I am Omkar, a professional 3D designer and artist with experience in IT product development. I can help develop a cost-effective engineering design for your modular micro-robot, focusing on CAD, component integration, and manufacturing readiness. • 3D CAD design of the robot body, movable arms, joints, and docking connections. • Compact component placement, clearance checks, and assembly design. • Electronics architecture covering the microcontroller, motor drivers, Bluetooth, battery monitoring, and 2-pin pogo-pin charging dock. • Component selection, BOM, and estimated costs. • Feasibility assessment of the reaction-wheel movement mechanism and alternatives. • PCB design and manufacturing files, including Gerbers and drill files. • Planning for firmware and Python-based PC control software. • Assembly documentation and cost comparisons for 1, 3, 5, and 10 robots. I will prioritize readily available components, standardized designs, and economical manufacturing methods to maximize production within your KRW 500,000 budget. I will assess the feasibility of arm movement, locomotion, relative positioning, and automatic docking before finalizing the design. I recommend starting with a feasibility report and cost breakdown, followed by detailed CAD, electronics, software, and validation in agreed stages. Thank you! I look forward to discussing your project.
$83 USD in 5 days
1.3
1.3

Hi, I can help design your modular micro-robot, including mechanical CAD, PCB, motor integration, Bluetooth control, firmware, and charging dock. I’ll assess feasibility and provide CAD files, BOM, PCB files, and source code while considering your KRW 500,000 budget. Thanks, Deepak
$83 USD in 7 days
0.3
0.3

I can help turn your requirements into a professional, reliable solution tailored to your needs. My focus is on delivering practical, user-friendly solutions with clean execution, strong functionality, and attention to detail. For your Micro-Robot Engineering & Production Files project, I can help with comprehensive engineering design, including PCB layouts, mechanical CAD models, and complete software packages to ensure the final result aligns with your goals. I have extensive experience in robotics and electronics, and I understand the need for a manufacturable design that meets all specified functions within your budget constraints. I will prioritize cost-effective components and efficient manufacturing processes to maximize production output. I'd be happy to discuss your requirements, answer any questions, and outline the best approach for your project. Regards, jamesh920
$70 USD in 7 days
0.0
0.0

Hi, I’d love to help bring your project to life. With extensive experience in robotics, mechanical design, and electronics engineering, I can design a fully functional micro-robot inspired by Big Hero 6. My focus is on creating a complete, manufacturable package that meets your specifications within your budget of KRW 500,000. I understand the importance of details like independently controlled arms, a compact design, and effective communication systems. I’m committed to providing all necessary engineering files, including PCB layouts, CAD models, and firmware, ensuring everything is ready for manufacturing. Let’s have a quick chat about your needs — worst case, you walk away with a free consultation and a clearer idea of how to move forward. Regards, Sue-Ann
$70 USD in 7 days
0.0
0.0

Hi, Looking for an experienced technology partner to turn your concept into a reliable, production-ready product? We can help. Greetings from OSTronik India, we are specializing in Power Electronics, PCB Design, Embedded Systems, Firmware, IoT, AI Integration, and Mobile Application Development. Our Expertise ⚡ Power Electronics DC-DC & AC-DC converters, power supplies, power management, voltage/current regulation, protection, isolation, switching circuits and customized power solutions. ? PCB & Hardware Multilayer PCB design, schematic development, component selection, BOM preparation, Altium Designer, EMI/EMC considerations and production-ready files. ? Embedded & Firmware STM32, ESP32/ESP8266, PIC, AVR, Raspberry Pi, Embedded C/C++, sensor interfacing, hardware integration, debugging and optimization. ? IoT & Communication UART, SPI, I²C, CAN, RS-485, Modbus, MQTT, Wi-Fi, BLE, LAN, cloud connectivity and real-time monitoring. ? Mobile Applications Custom Android & iOS applications for device control, monitoring and data visualization. We can take your project from concept → design → prototype → testing → production, with a focus on reliability, performance and cost efficiency. Share your requirements or existing files, and let’s discuss how we can bring your product to life. Best Regards, Team OSTronik India Empowering Innovations
$83 USD in 7 days
0.0
0.0

Hi, I reviewed your micro-robot requirements. I can contribute to the software side, including Python-based PC control, Bluetooth communication, command handling, sensor data monitoring, and integration with programmable microcontrollers. I understand that this project requires a complete engineering package, not just a 3D model. The design must account for motor control, battery protection, two-pin pogo-pin charging, mechanical docking, PCB layout, and manufacturing constraints. I recommend starting with a feasibility study to assess the robot's minimum practical size, movement mechanism, docking accuracy, component availability, and estimated production costs. The full specification may not be achievable within KRW 500,000, including engineering, manufacturing, and charging equipment. I would therefore recommend validating the technical requirements and budget before committing to a production design. My primary expertise is full-stack software development and API integration. For the complete hardware package, I would recommend collaborating with a qualified robotics and electronics engineer. I can discuss the software scope, deliverables, timeline, and milestones separately. Regards, Himanshu
$83 USD in 1 day
0.0
0.0

Yuseong-gu, Korea, Republic of
Member since Aug 9, 2024
$10-25 USD / hour
$200-900 USD
$30-250 USD
$10-140 USD
$30-250 USD
$250-750 AUD
min ₹2500 INR / hour
$30-250 AUD
$10-30 USD
₹600-1500 INR
$250-750 USD
₹9999-10000 INR
£20-250 GBP
$250-750 USD
$250-750 USD
₹12500-37500 INR
$30-250 USD
$250-750 AUD
$30-250 CAD
$250-750 USD
₹12500-37500 INR
$250-750 USD
$250-750 USD
$30-250 USD
$10-30 USD