
In Progress
Posted
Paid on delivery
Objective 1 is to conduct a systematic literature review of lightweight IoT authentication protocols published in the last years (2015-2026) and create a comparison matrix that includes at least 45 primary studies and a documented statement of the evaluation gap. • Objective 2: Design LAP-Ascon, a three-message mutual authentication and key establishment protocol which is based on 100% on Ascon-AEAD128 and Ascon-Hash256, and a fully-specified message format, state model and threat model. • Objective 3: Design security has been verified with the help of two independent automated tools (ProVerif and Scyther) and design has been modified until it is verified by both the tools. • Objective 4: Deploy the protocol on an ESP32 and an ARM Cortex-M4 development board (as well as in the gateway) and publish the code and build instructions as an open-source repository. •Objective 5: Design and implement a benchmarking harness that can be reproduced and benchmark LAP-Ascon and three baseline protocols on the same hardware reporting execution time, RAM, flash, bytes on the wire, and energy per authentication with confidence intervals.
Project ID: 40750878
44 proposals
Remote project
Active 5 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
44 freelancers are bidding on average $382 NZD for this job

As an experienced researcher and cybersecurity professional, I am eminently qualified to take on your project on lightweight authentication protocols for resource-constrained IoT devices. With over a decade in the industry, I have mastered the art of comprehensive research analysis and can efficiently conduct a systematic literature review that meets your objectives. In addition, my skills in technical writing and research publication give me an edge in facilitating the documentation of an accurate comparison matrix to outline evaluation gaps within the primary studies. Moreover, when it comes to the design and security verification processes, I have had hands-on experience with various tools such as ProVerif and Scyther. My adaptable nature has seen me successfully navigate through hitches during results verification and introduced notable modifications where necessary. Finally, having worked with the ESP32 and ARM Cortex-M4 development boards previously, I am confident in carrying out deploying LAP-Ascon protocol on them flawlessly. Furthermore, I'm committed to open-source principles and will efficiently publish all relevant codes and build instructions.I also have solid skills in network administration that would be invaluable while designing and implementing a benchmarking harness for this project.
$750 NZD in 7 days
8.3
8.3

Hi, I can provide research and technical support for your lightweight IoT authentication project, covering the literature review, protocol specification, formal verification, embedded implementation, and reproducible benchmarking. I hold a Bachelor’s degree in Computer Science and a PhD in cyber security , with experience in cybersecurity research, technical documentation, and structured research analysis. I can support: • A systematic review of 2015–2026 literature with 45+ primary studies, comparison matrix, and documented evaluation gaps • Formal specification of the LAP-Ascon three-message mutual authentication and key-establishment protocol, including message formats, state model, and threat model • ProVerif and Scyther verification and analysis of security properties • ESP32 and ARM Cortex-M4 implementation, gateway integration, build documentation, and reproducible repository structure • A benchmarking harness comparing LAP-Ascon with three baseline protocols using execution time, RAM, flash, communication overhead, and energy/authentication measurements with confidence intervals • Clear technical documentation and reproducibility guidance I can work systematically from the research objectives through implementation and evaluation, maintaining traceability between the protocol design, formal verification, hardware results, and conclusions. Kindly consider me, thank you.
$250 NZD in 3 days
7.9
7.9

As a seasoned tech professional with over 15 years of experience and a solid background in computer security and IoT, I'm the perfect candidate for your research project on Lightweight Authentication Protocols for Resource-Constrained IoT Devices. My expertise spans wide across Web Development, Mobile App Development, AI/ML and Cybersecurity - all areas that are aligning with your project's objectives. Having worked on numerous IoT projects before, I understand the unique challenges posed by resource-constrained devices and thoroughly comprehend the significance of lightweight authentication protocols. Leveraging my robust research, technical writing, and analytical skills, I will conduct an extensive review that encompasses primary studies dated from 2015-2026. Through this review, I will not only gather information but also identify any existing evaluation gaps with reasoning.
$250 NZD in 7 days
7.0
7.0

Dear Client, I am a skilled research writer, and I would be delighted to accept your offer for this research project on Lightweight Authentication Protocols for Resource-Constrained IoT Devices. My professionalism is unmatched, so you can expect A+, AI and plagiarism-free work (with free Turnitin reports). Please get in touch so we can proceed with the project.
$300 NZD in 3 days
6.7
6.7

Affordable, Early Delivery. ★★★★★★★★★★★★★★I hold a Masters degree which gives me the requisite background to handle writing from various subjects. I am a highly committed person towards my work. You can rely on QualityXenter for quality and consistency in writing. We never violate copyright rules. I have vast amount of experience in this industry since I am working from 2015 as a professional writer. I provide many modifications till to get your satisfactions. I have access to enough journals to use in your research project. I always produce quality work at VERY LOW RATES so, don't worry if you have a low budget for your work, I will be very happy to make a new client like you. I am producing quality work for my clients including ARTICLE WRITING, REPORT WRITING, ESSAY WRITING, RESEARCH PAPERS, BUSINESS PLAN, TECHNICAL WRITING, MATLAB, THESIS, ACCOUNTING & FINANCE work ETC. Go through my profile link https://www.freelancer.com/u/qualityxenter
$250 NZD in 1 day
6.4
6.4

Hello, Your objectives require a strong combination of systematic literature review, lightweight IoT security research, formal verification, embedded implementation, and reproducible performance benchmarking, and I can handle these components with a structured and research-focused approach. I can conduct a comprehensive review of lightweight IoT authentication protocols published between 2015 and 2026, identify and analyze at least 45 primary studies, develop a clear comparison matrix, and document the evaluation gap in a academically rigorous manner. For LAP-Ascon, I can help develop the three-message mutual authentication and key establishment protocol using Ascon-AEAD128 and Ascon-Hash256, including the complete message format, state model, assumptions, and threat model. I can also support formal security verification using both ProVerif and Scyther, iterating on the protocol design until it successfully satisfies the required verification properties. For implementation, I can work across ESP32, ARM Cortex-M4, and gateway environments while preparing clean build instructions and an open-source repository. Finally, I can develop a reproducible benchmarking harness comparing LAP-Ascon with three baseline protocols, measuring execution time, RAM, flash, communication overhead, and energy consumption with confidence intervals. I’m ready to approach this as a publication-quality research project. Best regards, Laura
$500 NZD in 7 days
6.2
6.2

Hi there, I have checked your project, which requires research project on Lightweight Authentication Protocols for Resource-Constrained IoT Devices. I’m a professional academic writer with 7 years’ experience penning different academic research, thesis, essay, and dissertation on various subjects. I am well skilled with numerous citation and referencing styles, including APA, MLA, HARVARD, CHICAGO and Turbain along with skills of MATLAB, Python, SPSS, Machine Learning, Data Science, R Studio, Ansys, Cloud computing etc. Please feel free to connect with me in the chat. Regards Bharti
$250 NZD in 3 days
6.3
6.3

Hello Sir/Madam, I understand your requirements and I can help you with this project professionally. I have experience in academic research, technical writing, and engineering projects, and I can support the literature review, comparison of 45+ studies, protocol design, security verification, and documentation. I can also help with ESP32 and ARM Cortex-M4 implementation, benchmarking, and clear reporting of performance results. I am ready to work with you throughout the project and would be happy to build a long-term professional working relationship. I look forward to working with you. Let’s connect in the chatbox for further discussions. Thank You. Dr. Divya.
$250 NZD in 7 days
5.2
5.2

Hi, I am an embedded systems engineer with over 16 years of experience. I have extensive experience with secure IoT firmware, authentication protocols and performance evaluation on resource-constrained devices. I can support this research from the literature review through to protocol design, formal modelling and hardware benchmarking. I would start with at least 45 primary studies from 2015–2026, building a traceable comparison matrix and identifying the evaluation gap. I would then specify LAP-Ascon’s three-message exchange using only Ascon-AEAD128 and Ascon-Hash256, including message formats, states and threat assumptions, and refine the design using ProVerif and Scyther. For hardware evaluation, I would develop the ESP32, Cortex-M4 and gateway implementations with an open-source repository and build instructions. The reproducible benchmark would compare three agreed baselines on the same hardware, covering execution time, RAM, flash, transmitted bytes and energy per authentication with confidence intervals. The complete scope needs staged delivery. My NZD 750 bid and 14-day estimate cover the initial literature review, comparison matrix, evaluation gap and draft protocol specification. I am flexible about arranging subsequent milestones. Have you selected the Cortex-M4 board, baseline protocols and energy measurement equipment? Please contact me to discuss details.
$750 NZD in 14 days
4.7
4.7

Hi, This project involves five tightly connected phases: a systematic literature review (SLR), Ascon-based protocol design, formal verification (ProVerif/Scyther), firmware implementation (ESP32/M4), and rigorous benchmarking. My strategy is to first define the evaluation matrix, design the protocol state/message models using Ascon primitives, and iterate the design until verification tools pass. For deployment, I will build a reproducible harness that captures exact RAM/flash, energy, and latency metrics across the hardware to provide reliable, confidence-interval-based data. With 7+ years in embedded firmware and IoT hardware, I turn complex specs into stable, production-ready products. I build ESP32/STM32 solutions using FreeRTOS, wireless telemetry (BLE, MQTT, Wi-Fi), and secure OTA updates. I focus on edge-case testing, memory optimization, and hardware stability to avoid field failures. I work fluently in ESP-IDF, PlatformIO, and Altium/KiCad, delivering fast bring-up with clean documentation. Before we start, do you already have a preferred set of three baseline authentication protocols and a specific Cortex-M4 development board, or should I propose those based on reproducibility and fair comparison with the LAP-Ascon design?
$250 NZD in 14 days
4.1
4.1

I can support this as an end-to-end IoT security research and implementation project, covering the systematic review, protocol specification, formal verification, embedded deployment, and reproducible benchmarking rather than treating these as disconnected tasks. I would begin with a documented 2015–2026 search and screening methodology and build a comparison matrix of 45+ primary lightweight-authentication studies covering cryptographic primitives, messages, security properties, formal verification, hardware evaluation, computation/communication overhead, and energy evidence, which will make the evaluation gap defensible. For LAP-Ascon, I would specify the three-message mutual-authentication/key-establishment flow, identities/nonces, session-key derivation, replay protection, exact byte-level message formats, state transitions, failure behavior, and an explicit attacker/threat model using only Ascon-AEAD128 and Ascon-Hash256 as required. I have experience with Python, cryptographic/security prototyping, embedded-oriented implementation, protocol evaluation, and reproducible experimental workflows; for this project I would additionally model LAP-Ascon independently in ProVerif and Scyther, investigate counterexamples rather than suppress them, and revise the protocol until the stated properties are supported by both models—or clearly document any unresolved limitation.
$250 NZD in 7 days
3.6
3.6

I have run ProVerif and Scyther on three-message mutual authentication designs before, and they rarely agree on the first pass. Do you already have the three baseline protocols chosen for the benchmarking harness?
$500 NZD in 2 days
3.4
3.4

I have Experienced in IoT security, embedded systems, ESP32 development, lightweight authentication protocols, security testing, and performance benchmarking for resource-constrained devices. Your LAP-Ascon brief is refreshingly specific — Ascon-AEAD128, ProVerif plus Scyther, ESP32 and Cortex-M4, with a reproducible benchmarking harness. → I've built and benchmarked Ascon-based auth on ESP32 and Cortex-M4, measuring flash, RAM, wire bytes and energy. → I can run the 2015-2026 SLR to 45+ studies and deliver the comparison matrix with the evaluation gap stated. → Firmware, PCB and full prototype shipping handled end to end in-house.
$250 NZD in 2 days
2.8
2.8

With over two decades of combined professional experience in Computer Security, Embedded Systems and my proven ability to research, design, and develop robust lightweight authentication protocols, I am confident I am the ideal candidate for your project. I bring a unique perspective to the table with my dual command on academics and industry best practices. Having earned a PhD in Artificial Intelligence and a Bachelor’s degree in Computer Science, I boast an extensive understanding and expertise in the subject matter. This is further corroborated by my work experience as a Chief Technology Officer of an AI startup where I regularly designed and implemented automated tools for system verification. Leveraging this knowledge, I can not only conduct a comprehensive literature review but also design and implement your targeted three-message mutual authentication and key establishment protocol with precision. Moreover, my prior work on full stack SaaS applications with modern dashboards necessitated designing benchmarking harnesses which mirrors Objective 5 of your project. My unique blend of skills makes me best-suited to not only realize your immediate goals but also foresee future needs and contingencies empowering your IoT devices with sturdy authentication protocols. Hire me for an efficient, effective and innovative development approach to ensure a project that meets or exceeds expectation!
$250 NZD in 7 days
2.2
2.2

Hi, I can support this research project end-to-end, covering **literature review, lightweight protocol design, formal verification, embedded implementation and reproducible benchmarking**. I have **16 years of embedded/IoT R&D experience**, including ESP32, ARM Cortex-M platforms, resource-constrained systems, wireless protocols and real-time firmware. I can contribute to the systematic review of **2015–2026 lightweight IoT authentication protocols**, build a structured comparison matrix with 45+ primary studies, and document the identified evaluation gap. For **LAP-Ascon**, I can work on the three-message mutual authentication/key-establishment design using **Ascon-AEAD128 and Ascon-Hash256**, including message formats, protocol states, assumptions and threat model. I can also prepare formal models for **ProVerif and Scyther**, iterate the protocol design based on verification results, and document the security properties and limitations clearly. Finally, I can develop a common benchmarking harness comparing LAP-Ascon with three baseline protocols, measuring **execution time, RAM, flash, communication overhead and energy/authentication**, with repeatable experiments and confidence intervals. I can provide clean source code, verification models, datasets/results and documentation suitable for an academic publication. Best regards, Subhash Suman Embedded Systems | IoT | ESP32 | ARM Cortex-M | Security | Research
$500 NZD in 7 days
2.3
2.3

Hello, The real challenge here is not merely designing LAP-Ascon, it is making the security argument, formal verification, embedded implementation, and reproducible measurements agree under scrutiny. I can help structure the 2015-2026 systematic review, comparison matrix, evaluation gap, message/state/threat specifications, and verification workflow across ProVerif and Scyther. The ESP32 and ARM Cortex-M4 deployments can then feed a reproducible benchmarking harness covering timing, RAM, flash, wire bytes, energy, and confidence intervals, with an Open Source repository and build documentation. I can also keep gateway behavior and Network Administration assumptions explicit, while using Artificial Intelligence only where it genuinely supports literature triage or analysis, not as a substitute for cryptographic reasoning. YouTube can be considered for a concise reproducibility walkthrough if useful. I’ve shared an initial estimate based on your description, and once we go over a few technical or functional details, I’ll confirm the exact cost and delivery schedule. I suggest beginning by agreeing on the baseline protocols, tool versions, and measurement methodology, then locking the protocol specification before implementation. Which three baseline protocols, energy-measurement setup, and exact Ascon implementation constraints should anchor the comparison—and should raw traces and formal models be published? Best regards, Asad Which three baseline protocols, energy-measurement
$250 NZD in 10 days
1.7
1.7

I have experience with microcontroller firmware, including work with various platforms. I have developed systems with cryptography and data protection, which aligns with the requirements for designing LAP-Ascon based on Ascon-AEAD128. I can implement benchmarking and deployment on ESP32, as I have worked with similar embedded systems. How do you plan to ensure the reproducibility of the benchmark results across different hardware configurations?
$270 NZD in 14 days
1.3
1.3

Hi, I am around 13+ years experience in the IT Sectors. This is a rigorous, well-scoped research project spanning literature review, protocol design, formal verification, embedded deployment, and benchmarking — I'd approach it in that exact sequence: Phase 1: Systematic review of 45+ primary studies (2015-2026) on lightweight IoT authentication, producing a structured comparison matrix and documented evaluation gap. Phase 2: Design LAP-Ascon — a three-message mutual authentication and key-establishment protocol built entirely on Ascon-AEAD128/Ascon-Hash256, with full message format, state model and threat model. Phase 3: Formal verification , iterating the design until both tools confirm security properties. Phase 4: Implementation on ESP32, ARM Cortex-M4 and gateway, published as an open-source repo with build instructions. Phase 5: Reproducible benchmarking harness comparing LAP-Ascon against 3 baselines — time, RAM, flash, bytes-on-wire, energy, with confidence intervals. Please refer my portfolio for your reference https://www.freelancer.com/portfolio-items/11573499-https-vikramhospitalsorg Happy to discuss scope, timeline and budget. Best regards, Ramesh
$300 NZD in 7 days
0.0
0.0

Hi, designing LAP-Ascon around Ascon-AEAD128 and Ascon-Hash256 requires precise state modelling to ensure clean formal verification across both ProVerif and Scyther without replay or state-loss vulnerabilities. I will structure the 45-study SLR matrix to cleanly expose the evaluation gap, specify the three-message handshake with exact byte-aligned message formats, and validate secrecy and mutual authentication in both verification tools. From there, I will deploy the firmware targets onto ESP32 and ARM Cortex-M4 platforms using native C implementations, followed by a reproducible Python-driven benchmarking harness measuring execution cycles, peak SRAM, flash overhead, wire bytes, and shunt-resistor energy profiles. I can deliver the systematic review matrix and initial protocol specification within 3 business days for your review before embedded benchmarking begins. Which three baseline lightweight protocols are you planning to compare against LAP-Ascon in the benchmark harness? Best regards, Tumisang
$300 NZD in 3 days
0.0
0.0

Sure bro, paste this proposal: Hello, I have carefully reviewed your project requirements and I am confident that I can complete this work accurately and professionally. I will focus on delivering high-quality results within the required 7-day deadline. I am reliable, detail-oriented, and available to communicate throughout the project. I would be happy to discuss the requirements and get started immediately. Thank you for considering my proposal.
$500 NZD in 7 days
0.0
0.0

Auckland, New Zealand
Payment method verified
Member since Oct 5, 2026
$15-25 CAD / hour
$30-250 USD
₹12500-37500 INR
₹12500-37500 INR
$10-30 USD
₹600-1500 INR
£20-250 GBP
₹12500-37500 INR
$25-50 USD / hour
$15-25 USD / hour
₹12500-37500 INR
$10-30 USD
₹12500-37500 INR
$8-15 USD / hour
$30-250 USD
₹12500-37500 INR
$250-750 USD
$1000-5000 USD
₹600-1500 INR
$10-30 USD