
Closed
Posted
Paid on delivery
I'm seeking an experienced RF circuit designer to develop a low-noise receiver front end for a signal amplifier or receiver application, specifically for frequencies below 1 GHz. Key Requirements: - Design a low-noise receiver front end circuit. - Work within the frequency range of below 1 GHz. - Ensure high sensitivity and selectivity. Ideal Skills and Experience: - Expertise in RF circuit design, particularly low-noise circuits. - Proficiency with simulation tools (e.g., ADS, RFSim99). - Strong understanding of RF components and their behavior. - Previous experience with projects in the sub-1 GHz range. - Ability to provide schematics and design documentation. Please share your relevant experience and approach.
Project ID: 40800059
35 proposals
Remote project
Active 4 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
35 freelancers are bidding on average $128 USD for this job

Hi, I am an embedded systems engineer with over 16 years of experience. I have extensive experience designing low-noise RF and analog circuits, including sub-1 GHz receiver front ends, with careful attention to sensitivity, selectivity and stable operation. I would start by confirming your operating band and performance targets, then design and simulate the low-noise amplifier, input matching and filtering stages. I would assess noise figure, gain, stability and out-of-band rejection, and provide the schematic, component list, simulation results and supporting design documentation. I can also support PCB layout and prototype evaluation if required as a follow-on phase. What exact frequency band and channel bandwidth are you targeting, and do you have requirements for gain, noise figure, supply voltage and antenna impedance? My bid covers the circuit design, simulation and documentation. Please contact me to discuss details.
$250 USD in 10 days
7.7
7.7

Hi, I have experience in designing Circuits and can complete your project. I have expertise in the following: 1- Designing schematic and PCBA 2- Ordering the PCBA and getting boards manufactured. 3- Writing firmware for the PCBA to make sure everything works as expected. 4- I can also develop smartphone apps to communicate and control the hardware. If you wish we can discuss in chat. Thank you.
$140 USD in 7 days
7.5
7.5

Hello, My 10+ years of experience in electronics and PCB design make me well suited to develop a practical low-noise receiver front end below 1 GHz. I work across analog and digital electronics, schematic design, component selection, PCB layout, prototyping, testing, troubleshooting, and manufacturing documentation, covering the complete hardware development cycle your project requires. I can apply my understanding of RF components, wireless communication, sensors, ADC systems, and low-power electronics to support a sensitive and selective receiver design. My broader experience with embedded systems, LoRaWAN, cellular communication, and custom electronic hardware is directly relevant to signal-chain integration, while my PCB and DFM background helps ensure the circuit is suitable for reliable implementation rather than simulation alone. I can provide clear schematics, component documentation, and a professionally developed hardware design for your sub-1 GHz application. Choose me for an experienced electronics engineer who can take the receiver front end from concept through prototype and testing. Thanks!
$155 USD in 5 days
5.7
5.7

My background in circuit design, electronics, PCB layout, and simulation aligns directly with developing a sub-1 GHz receiver front end. I can support the design of a low-noise circuit for signal amplifier or receiver applications, with attention to sensitivity, selectivity, component behavior, and practical PCB implementation. Alongside circuit simulation, my PCB design experience helps connect the RF schematic to a layout suitable for real-world construction, while ensuring the design documentation is clear and usable. I can provide the required circuit schematics and technical design work for your low-noise receiver project. I would be glad to contribute my electronics, simulation, and PCB design skills to this RF circuit development and discuss the project further.
$51 USD in 1 day
5.1
5.1

Dear Client, Yes—I’m happy to design the sub-1 GHz low-noise receiver front end from requirements through schematic, simulation, and design documentation. The key is achieving sensitivity and selectivity together without creating instability, excessive noise figure, or strong-signal compression. PCB Must Innovations brings 30+ years of electronics/PCB experience across RF hardware, low-noise analog design, sub-GHz wireless systems, RF filtering, matching networks, controlled-impedance routing, and antenna/RF-sensitive PCB layouts. Profile: https://www.freelancer.in/u/electronicsdone I can develop the LNA/filter/matching architecture, select RF components, simulate gain, noise figure, input/output matching and stability, and provide the complete schematic with design notes and component values. The amateur trap is optimizing only for gain. Haha, a high-gain front end can still be a poor receiver if noise figure, selectivity, stability, or blocker handling are weak. I’m happy to offer a free consultation first so we can define the actual RF performance targets before selecting the architecture. One question: what exact frequency band, minimum input signal level, bandwidth, and required output/interface does the receiver need? Message me with those details and I’ll outline the front-end, filtering, and simulation approach before you commit. Kind Regards Prat PCB Must Innovations
$180 USD in 4 days
6.4
6.4

My expertise in circuit design, electrical engineering, electronics, PCB layout, and simulation directly matches your need for a sub-1 GHz receiver front end. I can support the development of a low-noise amplifier or receiver circuit focused on high sensitivity, selectivity, and practical RF component behavior. My background combines circuit design with simulation and PCB layout, allowing me to contribute from the initial RF concept through the schematic and board-level design. I can provide clear circuit documentation and apply careful attention to signal integrity, component selection, and the requirements of low-noise operation below 1 GHz. I would be pleased to apply my electronics and simulation skills to your receiver project and deliver a well-documented RF design.
$86 USD in 2 days
5.0
5.0

Hi, I can help you design a low-noise RF receiver front end operating below 1 GHz. I'll focus on achieving good sensitivity and selectivity through proper component selection, filtering, and impedance matching. I can also provide circuit schematics, simulation results, and clear technical documentation. I'd be happy to discuss your specific requirements and get started. Best regards!
$50 USD in 1 day
3.9
3.9

Our specialization in RF and microwave circuit design makes us well suited to develop your sub-1 GHz low-noise receiver front end. We work across the full RF development cycle, from circuit concepts and simulation through hardware implementation and system integration, with a strong focus on high-performance, reliable electronic solutions. Our background in high-frequency systems, RF components, microwave engineering, circuit design, and signal processing supports the sensitivity and selectivity your application requires. We can also provide clear schematics and technical design documentation, while our PCB layout and simulation experience helps ensure the design translates effectively into a practical receiver or amplifier front end. I would be pleased to apply my RF engineering expertise to this project and deliver a carefully designed, simulation-supported solution for your sub-1 GHz application.
$100 USD in 7 days
3.6
3.6

Hello, I’m a Hardware and PCB Design Engineer with experience in analog electronics, signal conditioning, component selection, and high-quality PCB layout. I can help develop a low-noise RF receiver front end for your sub-1 GHz application, including circuit architecture, component selection, impedance-matching considerations, bias networks, and PCB design. My proposed workflow includes: - Defining the target frequency and bandwidth. - Selecting suitable RF transistors or LNA components. - Designing input/output matching networks. - Evaluating gain, noise figure, and stability. - Preparing the schematic and technical documentation. - Reviewing PCB layout for RF performance. Before finalizing the design, I would like to clarify the target frequency, required gain, noise figure, and whether simulation and prototype validation are included in the scope. I prefer to establish measurable RF performance targets before proceeding. Best regards,
$140 USD in 7 days
4.4
4.4

Greetings Dear Hiring Manager I can design a low noise RF receiver front end optimized for sub 1 GHz sensitivity and selectivity 1. What exact frequency range is required? 2. What are the target gain and noise figure? 3. What input signal level must be detected? 4. Are specific filters or LNA components preferred? 5. Do you require ADS simulations and PCB layout? I am waiting in chat to discuss your project in more detail Best Regards Dr Kainat
$31 USD in 1 day
3.7
3.7

Hello, I am interested in working on your RF Circuit Design project and can help develop a reliable, efficient, and high-performance RF solution based on your technical requirements. I have a strong background in electronics, circuit design, PCB development, and embedded systems. I can assist with designing, reviewing, and optimizing RF circuits while ensuring proper component selection, impedance matching, and overall circuit performance. I can work on RF schematic design, amplifier circuits, filters, oscillators, matching networks, transmission lines, and antenna interfaces. I will also focus on signal integrity, frequency response, noise reduction, power efficiency, and PCB layout considerations. Using appropriate simulation and design tools, I can evaluate circuit behavior, identify potential issues, and recommend improvements to achieve the desired electrical and RF performance. My goal is to deliver a technically sound and well-documented RF circuit design that meets your specifications and is suitable for prototyping or manufacturing. I can provide schematics, PCB design files, simulation results, and design documentation as required. I look forward to discussing your project details and helping you achieve a successful RF circuit design.
$100 USD in 3 days
3.5
3.5

Sub-1 GHz low-noise front ends live or die on layout and component choice, and I've shipped RF boards where that mattered. → Designed nRF52840 BLE front ends with matched antennas and low-noise receive paths on custom PCBs. → I'll deliver the LNA stage schematic, matching network, and simulation-backed design docs. → Full in-house PCB and prototype shipping, so the design lands on real hardware. The estimated budget for this work would be $140. Happy to discuss your frequency and sensitivity targets in detail.
$140 USD in 4 days
3.2
3.2

Hello, I’m an RF and PCB hardware engineer with hands-on experience in sub-1 GHz receiver circuit design — including LNA front ends, impedance matching networks, and filter design for high-sensitivity applications. Relevant experience: RF PCB designs featuring BLE and sub-GHz wireless interfaces, optimized for low noise figure and maximum sensitivity Simulation and verification using ADS and RFSim99 for LNA, bandpass filter, and matching network performance Component selection and characterization: LNAs, SAW/BAW filters, mixers, and RF switches across <1 GHz bands Full deliverable packages: schematics, BOM, and detailed design documentation My approach for your project: Align on target noise figure, gain, IP3, and dynamic range specs Select LNA IC and optimize input matching network for minimum NF Design bandpass filtering stage for selectivity and image rejection Simulate and validate the full front-end chain in ADS/RFSim99 Deliver complete schematics and design documentation I understand the core trade-offs — noise, gain, linearity, and selectivity — that define a quality sub-1 GHz receiver front end, and I bring a systematic, simulation-first approach to every design. I’d be glad to discuss your specific frequency band, sensitivity targets, and end application. Let’s connect! Best regards, XinTian
$200 USD in 7 days
3.4
3.4

Dear Client, A low-noise amplifier can have an excellent datasheet noise figure and still deliver poor receiver sensitivity. Loss ahead of the LNA, impedance mismatch and nearby strong signals can erase the benefit—and excessive gain can overload the next stage. I bring 11+ years of electronics and PCB design experience across 500+ projects, including RF-sensitive layouts, antenna tuning and wireless hardware. I've developed the sub-GHz LoRaSense RGB Pi HAT and precision low-current transimpedance amplifier circuits, combining practical RF integration with low-noise analog design. My approach: Band/Signal Review → Noise & Gain Budget → Preselection Filter → LNA/Matching → Linearity & Stability → RF Simulation → Schematic → Validation Plan I'd calculate cascaded noise figure, gain and blocker tolerance before selecting components. Filter insertion loss and PCB grounding deserve as much attention as the LNA itself. I can deliver a component-level RF schematic, BOM, matching calculations, simulations and a focused test plan. PCB layout and prototype measurements can be scoped separately. Two questions: 1. What exact frequency band must the receiver cover? 2. Is your priority weak-signal sensitivity, or rejection of strong nearby transmissions? Profile: https://www.freelancer.in/u/ElectronicsMust Message me and I'll share the first three RF trade-offs I'd assess before choosing the front-end architecture. Kind Regards, Avi Gupta Quality is never an accident.
$140 USD in 7 days
3.0
3.0

I am an Electrical and Electronics Engineering professional with a strong background in RF circuit design, electronics, and system simulation. I can develop a low-noise receiver front end tailored to your sub-1 GHz frequency requirements, with particular attention to achieving high sensitivity, low noise figure, and excellent selectivity. My approach will involve selecting suitable RF components, designing and optimizing the amplifier and input matching networks, and evaluating overall receiver performance. I can use ADS or equivalent RF simulation tools to analyze gain, impedance matching, noise figure, stability, and frequency response, ensuring the design meets the intended specifications. You will receive a complete circuit schematic, simulation results, component specifications, and clear technical documentation to support implementation and future modifications. I am committed to delivering a reliable, well-optimized design and maintaining clear communication throughout the project. I would be glad to discuss your application and technical requirements before starting.
$200 USD in 7 days
3.1
3.1

Hi, I'm an electronics hardware engineer with around 3 years of experience working for a Japanese company, specializing in PCB schematic design, layout, and hardware development. I have practical experience with RF and wireless communication circuits, particularly sub-GHz applications using the CC1101 transceiver at 433.92 MHz. I've also worked on 4-layer PCB designs, 50Ω impedance-controlled RF transmission lines, SMA antenna connectors, and RF layout optimization. For your project, I can help with: - Developing the RF receiver front-end schematic. - Selecting suitable low-noise RF components and LNA solutions. - Designing input/output impedance matching networks (50Ω). - Evaluating RF filtering and frequency selectivity. - Optimizing PCB layout to minimize noise and signal interference. - Preparing schematics, PCB layouts, BOM, and manufacturing documentation. My approach is to first understand your target frequency, bandwidth, sensitivity, gain, and noise figure requirements. Based on these specifications, I will propose a suitable RF architecture, select components, and develop the circuit design. I pay particular attention to RF signal integrity, grounding, impedance matching, and practical PCB manufacturing considerations. I'd be happy to review your requirements and discuss the best technical approach for your application. Looking forward to working with you. Best regards, Phuong
$140 USD in 7 days
2.3
2.3

For a sub-1 GHz receiver, the noise figure is mostly decided by the first stage, so I'd start with an LNA with a good low-noise transistor, proper input matching, and a front-end filter for selectivity. I'll deliver the schematic, simulation results and a short design document with component values and the reasoning behind them. About 5 days. I have solid experience with wireless nodes and analog and mixed-signal boards, and some of my work is in my portfolio. What center frequency and bandwidth do you need?
$95 USD in 5 days
0.5
0.5

Hello, I have a background in PCB design and embedded systems, and I'm comfortable working with electronic circuit development and hardware design. For your RF receiver front-end, I can help develop a low-noise design operating below 1 GHz, with a focus on achieving good sensitivity, selectivity, and stable performance. My approach would be to first review the target frequency range, input signal level, bandwidth, and impedance requirements. Then I'll work on the RF architecture, LNA selection or design, input/output matching networks, filtering, and impedance matching. I'll also consider noise figure, gain, stability, and unwanted signal rejection. I can provide the circuit schematic, component selection, design calculations, PCB layout considerations, and technical documentation. Simulation and optimization can also be incorporated to verify the design before hardware implementation. I'd like to know your target frequency range and required bandwidth so I can propose the most suitable approach. Looking forward to discussing your project. Best regards Jherick
$30 USD in 2 days
0.0
0.0

My background in electrical and electronics engineering, combined with PCB layout expertise, supports the disciplined development of receiver front-end hardware where accurate schematics and practical component selection matter. I can contribute to a low-noise sub-1 GHz design with close attention to signal integrity, power distribution, grounding, and layout constraints. My engineering work includes equipment selection, electrical calculations, technical specifications, detailed drawings, and installation-ready documentation for complex infrastructure projects. I also use MATLAB and other engineering software for technical analysis, and my PCB Layout skills are directly relevant to translating an RF circuit into a coordinated hardware design. The final package can include clear schematics and supporting design documentation focused on sensitivity and selectivity. I would be pleased to apply my electrical engineering and electronics expertise to your RF receiver front-end project and discuss the design further.
$140 USD in 7 days
0.0
0.0

Low-noise RF front-end design is best delivered through disciplined topology selection and verified simulation. I’ll create a sub‑1 GHz receiver front end with strong sensitivity and selectivity by setting target noise figure, gain, and matching networks for each band. Using ADS (and/or RFSim99-style workflows), I’ll model LNA stability (S11/S22, Rollett K/μ), optimize biasing, and co-simulate parasitics to avoid real-world degradation. You’ll receive complete schematics, design notes, and measured-ready parameter tables: filter response, input/output matching, interstage gain plan, and layout-critical recommendations (guarding, grounding, RF return paths). I’ll tune for your amplifier/receiver application, including bandwidth constraints below 1 GHz, so the front end performs reliably under your expected dynamic range and source impedance.
$140 USD in 7 days
0.0
0.0

Kuala Lumpur, Malaysia
Member since Nov 3, 2026
$30-250 USD
₹12500-37500 INR
$1500-3000 USD
$250-750 USD
$3-10 NZD / hour
₹1500-12500 INR
$30-250 USD
$30-250 USD
$10-30 USD
$10-30 USD
$10-20 SGD / hour
$250-750 USD
$30-250 USD
$75-125 USD
$10-30 USD
$30-250 USD
₹600-1500 INR
£20-250 GBP
€30-250 EUR
₹12500-37500 INR