S7-1200 Modbus Network Weintek HMI Programming

@AwaisChaudhry

Hello! I understand that you have seven Siemens S7-1200 PLCs connected to Schneider power meters via RS-485 Modbus. My approach would involve creating a clean and reusable TIA-Portal program that polls each meter systematically, accurately decoding the important data for voltage, current, power, and energy. I will ensure that this data is published over Ethernet/IP to a single master PLC, with clear tags for identification. Additionally, I’ll update your Weintek HMI to display all parameters in real time, complete with meaningful labels and engineering units. I will make sure to prove everything works thoroughly, either through simulation or with my equipment, before final handover. Can you confirm the exact register addresses and data types for each parameter from the Schneider register map? Do you need support in configuring the Ethernet/IP settings on the master PLC? What specifications are required for the consolidated data displayed on the Weintek HMI? Will you provide the expected scan times, or should I establish those based on standard practices? Are there any specific labeling conventions you prefer for the HMI displays? Do you have any limitations on the software versions used for the TIA Portal and Weintek EasyBuilder Pro? What hardware do I use for the initial simulations, or can you provide access to your setup? Are there any other existing protocols that I should consider while designing the system?

@mesutgode

Hello I will not writing long AI texts . I am experienced automation engineer. You can check my portfolio and we can discuss details. Thank you

@yilinw010924

Hello, I can deliver a complete, clean and fully tested TIA Portal v17 solution for your 7× S7-1200 Modbus field PLCs and 1× master PLC, including Schneider meter polling, Ethernet/IP data exchange, and full HMI integration in EasyBuilder Pro. I have strong experience with Siemens S7-1200/1500, Modbus RTU over RS-485, and Schneider PM series meters (including float/DWord decoding, endianness handling, scaling and diagnostics). I routinely build reusable, structured FBs for cyclic Modbus polling and robust communication status monitoring. For your project I will: • Implement custom Modbus FBs for Voltage/Current/Power/Energy (verified via PLCSIM Advanced or my own hardware) • Build a clean master–slave data model with clear tags for all 7 devices • Update your Weintek project with organized tag lists, engineering units and sample screens • Provide commissioning notes and a remote live walk-through to confirm real readings and stable 30-minute operation You will receive fully commented TIA v17 projects for all PLCs and a ready HMI project. I can start immediately. Let’s get this running smoothly.

@stolzenterprises

The professional with 16 years of experience in Industrial Automation. ^^Development,Commissioning of PLC Control System, HMI and SCADA^^ ◾PLC- Siemens [S7-1500F/H, S7-400, S7-400F/H/R, S7-300, S7-1200, S7-200, S5, TI PLC, LOGO!] Rockwell [(Allen Bradley)- SLC500,MicroLogix,CompactLogix.] Schneider [Zelio, M171/72] Automation Direct [DirectLogic Click PLC] Unitronic [V200-18-E3XB Controller] Delta [Delta DVP ES2] Click [C2 series] ◾HMI- Siemens ** Weintek ** Kinco ** Unitronics ** Hitachi ** Schneider ** Wecon ** DeepSeaElectronics** EZ Automation**Maple ◾SCADA - WinCC ** In-Touch Wonderware ** Citect ** Ignition ◾VFD- Siemens, Rockwell-AB, ABB, Telemechanique, SEW and Danfoss, Hitachi ◾ Industrial Networks- PPI-MPI ** Profibus ** AS-i ** Profinet ** Ethernet ** Modbus RTU/Modbus TCP ◾ OPC - PC Access ** OPC Scout ** OPCUA ** Metrikon ** Kepware ◾ Project Documentation- ISA88/95, GAMP, 21CFR Part11, VP, URS, FRS, DS, IQ, OQ, PQ, SOP. ◾ Programming Languages - C# ** VBA ** VB.net ** Javascript ** Python ◾ Arduino Uno ** RS485 ** Ethernet shield ** Data Logging ◾Raspberry pi ** Raspi Camera ? Networking Devices - Siemens ** Teltonika **NO OFFSITE COMMUNICATIONS**

@ghayasa727

Drawing from my extensive experience as an electrical engineer and especially in the field of microcontrollers, I am confident that I can excel in your task of creating a clean, reusable TIA-Portal program for your S7-1200 PLCs. My strong foundation in related areas such as Circuit Designing, PCB designing, and display interfacing will undoubtedly complement the specific programming needs you've outlined. Let me assure you that your project will not be just another job for me; it will be an opportunity to showcase my skills and provide you with nothing less than excellence. What sets me apart is not only my proven track record but also my innovative problem-solving approach. Combining a deep understanding of different technologies such as Modbus, Ethernet/IP, and HMI, with practical experience in real-time system design and data exchange protocols, I am confident I can craft an effective solution quickly and efficiently. I understand the importance of thoroughly verifying every step of the process before hand-over. I will ensure error-free compilation, precise live readouts that match the Schneider meter and uninterrupted data flow between all PLCs and the HMI throughout my work. To give you peace of mind, I'll provide you with extensive documentation including TIA Portal v17 project files for all eight PLCs fully commented, updates on Weintek EasyBuilder Pro projects and a concise commissioning guide tailored to your expectations.

@mykolalus

Hello! I will deliver a reusable, production-grade TIA Portal v17 solution that integrates seven slave S7-1200 PLCs with a single S7-1200 master and a Weintek HMI, implementing robust Modbus-RTU polling over RS-485, double-word IEEE-754 float decoding, and deterministic Ethernet/IP publishing. I’ll create modular, commented function blocks for Modbus RTU master/slave interactions, automatic scaling and unit conversion, and configurable retry/timeout logic. Each slave will expose Voltage, Current, Power and Energy tags mapped to the master with clear device identifiers and timestamps. I will update the Weintek EasyBuilder Pro project with HMI screens, engineering units, and diagnostic pages, and provide a comprehensive commissioning guide including connection settings, expected scan cycles, and DIP/SW recommendations. Deliverables: eight complete TIA v17 projects, updated EasyBuilder project, annotated tag lists, and a remote verification session. I will validate end-to-end communications in simulation or on bench hardware and ensure stable, accurate data flow for the acceptance test before handover. Looking forward to discussing more details. Regards, Mykola

@redbrickamerica

Hello! I am prepared to tackle the S7-1200 Modbus Network Weintek HMI Programming project, leveraging our expertise in PLC & SCADA, Electronics, Simulation, Data Visualization, and Electrical Engineering. We will develop a clean, reusable TIA-Portal program to decode Voltage, Current, Power, and Energy values from seven PLCs, publishing them to a master PLC and displaying them on a Weintek HMI. Our team will meticulously create Modbus function blocks, establish network data exchange logic, and configure HMI tags/pages for real-time monitoring. Count on us for error-free compilation, seamless data flow, and a detailed commissioning guide for your convenience. Cheers, RedBrick American Engineering

@engabdo172

Hello sir I'm PLC programmer with 10 years of experience in the automation field I have good experience with Siemens PLC and wentik I and I do alot of jobs using both I have Tia portal v17 which you what to work with it with my license I also have pro bulider for wentik hmi Please contact me for more detailes I hope we can work together I'm available for work from now Best regards

@yaroslavmark

Hello. I can deliver a fully structured TIA Portal v17 solution that polls all seven Schneider meters via Modbus RTU, correctly decodes the IEEE-754 double-word floats, and publishes each PLC’s data to the designated S7-1200 master using clean, reusable function blocks. I will also update your Weintek EasyBuilder Pro project with mapped tags, sample pages, engineering-unit formatting, and provide a concise commissioning guide plus a remote walk-through to validate live values. Before hand-over, the complete eight-PLC system will be simulated or bench-tested to ensure stable, uninterrupted data flow for the required duration. Best regards, Yaroslav.

@muhannadbukhamse

Hello Micheal M. This project entails creating a robust and reusable TIA Portal v17 program for your seven Siemens S7-1200 PLCs to communicate seamlessly with Schneider power meters via RS-485 Modbus. I will develop function blocks to accurately poll and decode double-word float registers for Voltage, Current, Power, and Energy. The data will then be published over Ethernet/IP to a single S7-1200 master PLC, with clear tagging to identify each device’s measurements. Your existing Weintek EasyBuilder Pro HMI will be updated with properly configured tags and sample screens for real-time, labeled parameter display. Deliverables include fully commented project files for all eight PLCs, the updated HMI project, a concise commissioning guide, and a thorough validation through simulation or hardware testing. Finally, I will provide a remote walk-through to demonstrate live data verification and ensure smooth commissioning. I’m confident in delivering a quality solution tailored to your precise needs.

@ahmeplc

Hello there, I understand that you need to get designs and PLC programmer for your product, I'd be more than happy to help you with that. I have +9 years experience in PLC, SCADA, HMI program development and site commissioning. Please feel free to contact me so we can discuss your project in more details. Regards,

@Barx10

I can deliver this professionally and with high quality. I work daily with S7-1200, Modbus RTU, and TIA Portal, so building clean Modbus FBs, decoding the Schneider float registers, and setting up the master–PLC data exchange is straightforward for me. I’m not deeply familiar with Weintek, but that part is simple—just mapping tags and creating clean screens. I’ll produce a reusable TIA v17 program for all eight PLCs, update the Weintek project with the needed tags/pages, and include a short commissioning guide. I will test everything so the data flow is stable and matches the Schneider meters. Contact me if you want me to take this on.

@dixit1307

As an Automation Engineer with extensive experience in handling complex PLC and HMI projects, I believe I'm the right fit for your S7-1200 Modbus Network project. Having worked extensively in the field of industrial automation, I have gained in-depth knowledge and expertise in implementing Modbus, Ethernet/IP, and OPC UA protocols. My primary objective with any project is to deliver not just functional but efficient solutions. That's why I approach every task with meticulous attention to detail and have a strong penchant for clean, reusable programming - exactly what you need for this endeavor. Rest assured, your seven Siemens S7-1200 PLCs will be integrated with precision and drafted with well-commented, easy-to-understand codes. Beyond just delivering the basics, I aim to provide added value. In line with this ambition for your project, I’m ready to go an extra mile by updating your EasyBuilder Pro project with working data tags and impeccable sample screens. Additionally, I'll prepare a comprehensive commissioning guide that doesn't just list out settings but also offers insights into expected scan times and DIP switch positions. Rest assured that all my deliverables are quality-checked and tested before delivery; a live walk-through session on my bench before hand-over will guarantee the uninterrupted flow of your data. Let's join forces to create a seamless solution that enhances your facility's performance.

@Abdullahcoco

Hello Michael, I understand the requirements of your project involving the programming of S7-1200 PLCs for Modbus network communication with Schneider power meters and Weintek HMI integration. My approach would be to develop a clean and reusable TIA Portal program that efficiently polls the meters, decodes the necessary registers, and transmits the data to the master PLC for consolidation. I will then ensure seamless integration with the Weintek HMI, displaying real-time parameters with clear labels and units. Could you please provide more details on the specific Schneider register map and node addresses to streamline the development process? I propose to deliver TIA Portal project files for all PLCs, an updated Weintek EasyBuilder Pro project, a commissioning guide, and a remote walk-through session for verification. Best regards, Abdullah

@hireageek

Hi there, I'm excited to take on the S7-1200 Modbus Network project! With my extensive experience in PLC programming and a solid track record as a top California freelancer, I have successfully delivered numerous projects that incorporate modular coding practices and seamless data communication. I understand the importance of a clean, reusable TIA-Portal program that can accurately poll your Schneider power meters and consistently deliver the requisite data to your Weintek HMI. I will focus on creating robust function blocks for Modbus communication, ensuring that all values for Voltage, Current, Power, and Energy are correctly decoded and accessible in real-time. I will also implement a comprehensive testing phase using simulation to validate everything before hand-over, guaranteeing error-free operation and timely delivery. I'm ready to get started. Let's connect to discuss any specific requirements you might have and to finalize the project timeline! What is your preferred method of verification for the live values on your bench during the remote walk-through? Best regards,

@proggon

Hi there, I see you're looking for a robust TIA-Portal program to seamlessly integrate your Siemens S7-1200 PLCs with Schneider power meters via Modbus, and subsequently relay that data to a Weintek HMI. It’s clear you want a meticulous, user-friendly setup that not only works well but also provides real-time monitoring while maintaining clarity in data presentation. To achieve this, I propose developing clean, reusable Modbus function blocks that will efficiently poll each meter and correctly decode the registers for Voltage, Current, Power, and Energy. My experience with TIA-Portal and integrating various PLC models assures a well-structured program that lays the groundwork for smooth network data exchange. I'll ensure the Weintek HMI project aligns perfectly by updating necessary tags and creating intuitive display screens. After thorough testing—either in simulation or via my own hardware—I will provide documentation for seamless commissioning and complete support during the walk-through session to ensure you’re comfortable with the system. What specific features or labels would you like to highlight on the Weintek HMI? https://www.freelancer.com/u/proggon Best regards, Wahaj Barlas.

@Yusrazubair1000

Hi Micheal M., Thank you for sharing the details of your project. I have thoroughly reviewed your requirements regarding the Siemens S7-1200 PLCs and Schneider power meters, and I am confident that my skills in developing clean and reusable TIA-Portal programs will be beneficial for this project. Before we move forward, I have a couple of questions to ensure that I fully understand your needs: 1. Are there any specific coding standards or guidelines you would like me to follow for the TIA Portal project? 2. Can you clarify if there are any particular communication protocols or settings you have in place for the Ethernet/IP connection? 3. What is your timeline for the completion of this project? Why Choose Me? - Over 250 significant projects successfully executed - Zero negative feedback in more than five years - Consistently receive 5-star ratings on my recent projects I am available for full-time work from 9 AM to 9 PM Eastern Time, and I would love to discuss this project further with you. Once we clarify the details, I can send you some examples of my recent work in the automation field. Looking forward to your response! Best, Syeda Yusra Zubair

@hassaan7766

Hi Micheal M., I understand you're looking for a reliable TIA-Portal program to effectively manage the communication between your Siemens S7-1200 PLCs and Schneider power meters, ensuring accurate real-time data visualization on your Weintek HMI. I'm confident that my expertise can deliver this solution. I am an experienced Electrical Engineer with over 5 years of specialized skills in Electronics, Microcontroller programming, PLC & SCADA, and Data Visualization. My background allows me to create clean, reusable code and effectively set up data exchange between the PLCs and your existing systems. You can find my previous work, which showcases similar projects, here: https://www.freelancer.com/u/hassaan7766 I look forward to collaborating with you on this project to ensure seamless operation and a successful handover. Thank you for your consideration! Regards, [Your Name]

@billybryan98

Hello Micheal, I’ve read your brief and can deliver a clean, reusable TIA Portal v17 solution that polls seven S7‑1200‑connected Schneider meters over RS‑485 Modbus, decodes double‑word floats (Voltage, Current, Power, Energy), publishes tagged values over Ethernet/IP to a single S7‑1200 master, and updates your Weintek EasyBuilder Pro HMI with meaningful labels and engineering units. I have hands‑on experience with S7‑1200, Modbus RTU, Ethernet/IP tag exchange and Weintek EasyBuilder Pro. I will create modular Modbus function block(s), device‑scoped DBs, clear naming per field device, consolidated data exchange logic on the master PLC, and HMI screens/tags. All eight TIA projects will be fully commented, tested in simulation/hardware and delivered with an EasyBuilder Pro project and a short commissioning guide. I can complete initial build and testing in 5 days and then schedule a remote walk‑through to verify live values and hand over the files. Best regards, Billy Bryan