Seeking Electrical & Mechanical & Materials Engineers to Form Detailed Building Plans for A Custom Motor

- Configure and draw specifications for a hand-size alternator/electricity generator. In 2 or 3 hours. Detail the building plan(s), by communicating with the others, and form an electricity generator which has a high energy efficiency, and lowest possible amount of loss and resistances, to have the resulting power output be optimal for power generation purpose. Provide the finished files to me to present the plan. - Electrical and mechanical engineers MUST be able to accurately achieve at least (without load) 75,000 RPM, using 100 volts, or, at least 37,500 RPM using 50 volts, (5,000 RPM deviation tolerated, but the input power amounts are MAXIMUMs allowed) and achieve any torque which is able to sufficiently "overcome" the inductor's magnetism resistance. The motor which spins the magnet near the inductor must be a ball bearing type, possibly with a frequency converter to achieve such high RPM, despite "low" power input. - Ensure the inductance and current output potential is as high as possible, at the inductor. - Have the motor be able to withstand constant and years-long term overvoltage of 200VDC worth of action force or 100VDC worth of action force, if choosing the 50V input version. Do not worry about friction and erosion. - The shaft and ball bearing materials must be durable enough to withstand 200 volts worth of motor action, NOT 100V. Or, be able to withstand 100V of motor action, not 50V. And, the two components will, later, incorporate usage of 1 atom-thick nano material sheets, which are bulletproof despite being that thin, while using either non-evaporating liquid to prevent van der waals bonding, or by using two different types of nano sheets, so they won't bond from touching. The shaft and bearing should be able to potentially use the sheets, by having some kind of screw hole, which is dipped to be "below" the surface which would be touching the partner part. Or, any other way to ensure the nano sheets stay there, during motor spin. - Form bill of materials, and make it under $850 total, for physical materials or parts, which ever is cheaper. - List where to buy the MATERIALS or parts from, whichever is cheaper to afford. There is a good possibility of having additional hours happen for the work. Money is available.