Raspbian işler

** THE DEVELOPER MUST HAVE HIS OWN Raspberry PI 4** I need a raspberry iso file for computer vision using python, torch and yolov5 It must run this project , so i need to someone make a fresh installation of raspbian on his raspberry add support for Intel NCS 2 and make the project run, then it must create a create a .iso file from the raspberry so i could just grab the iso file burn a sd card and run the project on my raspberry pi4 + Intel NCS 2. I will just pay 100USD so if you make a bid for 100 and then you say you want more you will be ignored.

Hi Michael H., i am looking for someone to change rapberry PI 4 Raspbian boot up screen to a company logo only - no raspberry logo or boot up info. Can you do this ?

I have a Raspberry Pi running Raspbian Buster. It functions as a gateway. A Huwaei e3372h-320 dongle is used for Internet connection. The RPi internal wifi module is setup as a WAP. Since a few weeks, the internet provider (4g provider) does only provide a IPv6 address and no longer a IPv4 address. The Raspberry is only configured for IPv4 (external address). So I currently can't connect to internet (the name is resolved, but I receive a 'destination net unreachable'). This should be fixed by changing the configuration files. The changes should be explained in the configuration files (add remarks) I can deliver the configuration files, and I can give (teamviewer) access to the RPi which has the dongle installed.

Company specializing in facial recognition technology. Need to integrate Real Sense Intel cameras (415 model) to a Raspberry Pi 4, running Raspbian OS. The video file/image files need to be sent to a secure server where we will overlay our analytical APIs.

We are looking for someone who can write a python wrapper for Intel already releases "release candidate" for p...releases "release candidate" for python, but it doesn't work What we need: 1. Python wrapper with methods: a) Start streaming video from the camera to the screen. (stop streaming) b) find the closest face. detect that this is real human c) make a picture of the face and get the vector endpoints 2. Make it runnable on the Raspbian(raspberry pi). We have a testing machine if needed with the camera PS: If you don't have experience with RealSenseID please do not apply. We don't have time to talk about how does it work, what kind of methods we need to port and etc.

Lavoro veloce, consiste nel convertire in file bin in eseguibile per Raspbian e per Ubuntu.

I have python code to read QR-code from img file. This code works fine without errors Now I need to use this code in Raspbian (Raspberry 3B+) to read from USB camera or MIPI camera. After this the code will be evaluate a value of data from QR-code and set high or low one output pin of Raspberry.

Tengo un conjunto de imágenes etiquetadas en XML y necesito que una Raspberry PI 3 B+ detecte la clase etiquetada a través de tensorflow lite. Debe entregar una guía detallada del proceso realizado en el SO Raspbian. Una vez comprobado el correcto funcionamiento se procede con el pago.

Requirement : Server : 1 ) Setting up PiVPN or OpenVPN Server in Raspberry Pi (OS : raspbian stretch lite). 2 ) Custom VPN Port instate default VPN Port. 3 ) Log file for those are login and logout via VPN. 4 ) Configure Raspbery Pi as Wake On Lan. 5 ) Script for create VPN profile. 6 ) Router Configuration (home router). 7 ) All configuration MUST in console mode. Client : 1 ) Microsoft Windows 10 VPN dial-up. 2 ) Microsoft Windows 7 VPN dial-up. Documentation : 1 ) describe step by step how to setting up for above task.

Lütfen detayları görmek için Kaydolun ya da Giriş Yapın.

Hi, We have an application build in Flask on Raspberry Pi that we run in chrome kiosk mode. The GUI for raspbian is disabled. We would like a WIFI GUI within the flask application, so it is possible for the user to connect to WIFI without leaving the application. It should be able to connect to all kind of WIFI: phone sharing, home WIFI, business WIFI, WIFI at hotels etc.. Setup: - Raspberry PI - Raspbian - Flask (Python) - Chrome kiosk mode We will add the code our self once it is done.

I need a resource to create a Raspberry Pi system that includes a Zabbix 5.0 Proxy and a RADIUS server. The RADIUS server must include the ability to easily push updated credentials and reload them via remote command/script. The deliverable should be step-by-step instructions suitable for any technician to re-...a resource to create a Raspberry Pi system that includes a Zabbix 5.0 Proxy and a RADIUS server. The RADIUS server must include the ability to easily push updated credentials and reload them via remote command/script. The deliverable should be step-by-step instructions suitable for any technician to re-create the finished product on a fresh Raspberry Pi 3 or 4. Preference is for O/S to be Raspbian/Debian based. Any questions of localization should be for USA/New York ...

I have develop some software . I would like this software to be developed for Raspbian using Python. I have built a smart trolley system using node-red and python including the raspberry pi. The system was equipped by database(mysql or dbmaria) and api system.

Looking for someone with experience in Flutter and raspberry pi to run a kiosk mode full screen auto start using Raspbian lite OS. Further details will be given to the suitable candidate. Please only apply for the job if you have experience with flutter and raspberry

I have a project to create an android app to control remotely hardware components of the pi. using pi - mainly raspbian os app - android studio -java the connection between two firebase

I need a Raspberry PI / Linux Kernel expert to rebuild me a Kernel for my Raspberry PI 4 so that the boot time is fast. At the moment it boots up in 30-40 seconds, and it needs to be under 5 seconds. Building a custom kernel is supposed to make it boot up < 1 ...Please read these for help: other resources:

I need a Raspberry PI / Linux Kernel expert to build me a custom Kernel for my Raspberry PI 4 so that the boot time is fast. At the moment it boots up in 30-40 seconds, and it needs to be under 5 seconds. Building a custom kernel is supposed to make it boot ...moment it boots up in 30-40 seconds, and it needs to be under 5 seconds. Building a custom kernel is supposed to make it boot up < 1 second. Please read these for help:

I have multiple Raspberry Pi 4 workstations used a TakePOS terminals for Dolibarr v13 that need to be able to print to Epson TM-T88IV thermal receipt printers. The RPi4s are running Raspbian GNU/Linux 10 (buster) / Linux 5.4.83-v7l+ armv7l. The receipt printers are connected directly to each RPi4 via USB cable. Project Requirements: The project needs to result in a step by step set of instructions for getting the printers working properly. The printers need to be able to (1) Print, (2) Open Cash Drawer #1, and (3) Cut: Per Job. The resultant instructions must be able to be used to duplicate the installation to a number of other RPi4s of identical configurations. I previously used the project at: as a driver (Epson does not produce ARM-compatible

i need a program like tinny task that run on raspbian for raspberry pi 4: -record move mouse -record click and events all keyboard -show time when record -save , load and play record here is a example when i need

I have a python script that plays random videos depending on what button is pressed. This is done through GPIO. I need the script modified to play a video if there is no other video playing via omxplayer. This means a specific video (informational mp4) should play when the script is run (before a button is pressed) and after a video finishes playing. I want all current functionality of script to remain as is, just need this additional feature added.

I am currently running Moodle Learning Management System Application on a Raspberry Pi 4. I want to protect the Moodle Application from unauthorised copy. I want the Raspberry PI SD CARD to be protected from being copied by any unauthorised person. I want the card to have encryption of the raspbian root and moodle LMS application.

We create a customizable GUI application to apply the various preprocessed techniques for the video. Depend on the video input and we can choose the techniques required and the Resultant output is displayed and needs to save the vi...each technique will have different types that also I need, like for example in noise reduction we have a max reduction and low reduction. And for all this preprocessing I need python code with documentation. 1. Gray-scale conversion 2. Edge detection 3. Noise reduction 4. Thresholding 5. Color filtration 6. Image segmentation 7. Background subtraction Technical Specification: • Raspberry Pi 3 • Raspbian OS • Language: Python • GUI: PyQt5 (python) this all things are implemented already I just need to live streaming and object detect...

We need to have the position of a wireless device (Wi-Fi 2.4GHz/5.8GHz) inside a building where we spread out many Raspberry Pi 4. So, using a triangulation location (or any effective method) could be one of the solutions taking into consideration that we have already used the Fine3 algorithm. Beacons' response too can be considered. Also, you can...GPS as an IPS (Indoor Positioning System). As it's inside a building, there is no direct GPS signal. The solution should be cost-effective as well. In the end, we should have a PoC with 3 or 4 Raspberries Pi4 locating a device with an accuracy of less than one meter. This should be done in a blueprint, show graphically the device. Any questions, please let me know. Note: Raspberry is running Raspbian. References:

-Install TOR and NORDVPN on Raspbian -Remote From Iphone -Upload Image From Phone and PC to Raspbian (FTP if possible) Anydesk is available for Remote.

Visualizar la interfaz gráfica de raspbian en entorno de realidad virtual incorporando sensores de movimiento

Hello, We have custom machinery running with PI3B+ and Arduino UNO with bCNC ). We have also Universal G-code Can you simplify the interface to our needs and machinery ? We will give you drawing to organize needed functionality. We can go step by step, with diferent stage, delivery and payment. Please let me know what you think. Kind regards Pascal Rossignol Sarl CLM France

Esc/pos is a standard language to print on thermal printers. Most of the printers on the market use this language to print. It was initially used with serial and parallel port, but nowadays ...printers before shipping, without the option to send it directly to the customer without having to set it up. my goal is to be able to use a usb/serial thermal printer implementing the ePos layer on a small program running on linux box. this way I will still use the printer on web page issuing ePos commands, routing esc/pos payload to the usb/serial printer. hardware will be raspberry pi 4b with raspbian OS (debian) if you apply to this project please verify you have necessary information about esc/pos and ePos if you own a usb/serial printer everything will be easier as you can test code on ...

Hello everyone! Looking for a very skilled candidate to help me writing a code and guiding me with this project. In my project, I need to build a model based in sets of image folders, and prepare/convert the model into Tensor Flow lite. My ultimate goal, is to use this model to recognize (and track) objects (tennis balls [x,y,w,h] ) in python. I will be using raspberry pi 4+ and Raspbian installed + the PI camera as well. Thanks!

Hi, I am on a project reading data from code-bar reader (something we see on every shop in the world). I managed to connect a usb barcode-reader under Ubuntu 12 : everything was fine till I changed of barcode-reader : the new one wouldn't be recognized by my python script. Furthermore, when I tried to move my script to Raspbian, it didn't work. And my barcode reader working under Ubuntu wouldn't be recognised under Mac OS. And the same with windows (I struggled installing libusb dlls). So, I have a working example of my script under Ubuntu, but I am struggling in making it change of OS or USB-device. I need someone to : 1) debug the scripts and make the USB-connectivity working on Mac-OS & Windows for the already-working usb-device 2) making the script work ...

This application must be written in Python and must use the integrated python sqlite. This python program will run on a raspberry Pi 4 with Raspbian. Sensors will be connected to GPIOs and this raspberry uses a raspberry touchscreen. No hardware assembly is part of this work, only the python program. The status of the variebles (Counters) must be keept in the sqlite, so even the prompt is closed when open again the counters will report the same numbers. With all counters equal to zero, the program could start one new counting, checking the status of the GPIOs. When start counting in one counter need to go till the end (count#limit) of the counting to start counting in a other counter. When GPIOs for a counter change from low to high, this starts a time counter, after 5 seconds i...

Nos encontramos en búsqueda de un programador (lenguaje no excluyente) que pueda generar una programación valida tanto para linux Debian como para Raspbian capaz de: Recibir: streaming SRT () PUSH / PULL streaming HLS (varios perfiles via m3u8 playlist) PULL Condiciones Boot to RAM - Interface de configuración remota de todo el desarrollo vía web (con usuario y contraseña) - VPN client (el equipo se conecta para la gestión a un VPN server, también se debe poder cambiar usuario/contraseña y host vía web) - Sin precarga de escritorio - Arranque automático de recepción de contenido. Observación: en caso de Raspberry, el contenido se deberá visualizar en interface HDMI, caso PC Linux ver opcione...

I am a software engineer and trying to make a "self healing" SD card for a raspberry PI board (running Raspbian) in the event the board's power is abruptly removed and the root partition corrupt. I have attempted to follow the instruction at with out success for the latest "Buster" version of Raspbian. Can you help produce a "working" "self healing" recovery SD Card and provide the instructions on how I can successfully do it?

...API (cloud) - Raspberry Pi to receive a unique webpage and store it locally 7. Have Yokoso TV Stick display the unique webpage in KIOSK MODE When all configuration is done, Raspberry Pi has to display the unique webpage in Kiosk Mode on the connected TV. ** This is the default scenario for Raspberry Pi: display the unique webpage in Kiosk Mode.** Hardware - Raspberry Pi Zero W OS - Raspbian OS (Linux based) Software - Node.js - NPM - - Vue.js - Javascript - Avahi-Daemon Project Requirements - Extensive Code Commenting - Regular communications throughout the project Further documentation is provided. Final Delivery: working Raspberry Pi Zero W Image...

I have a raspberry pi with raspbian OS configured as a Totem. I need a php page that let the user choose a wifi and store selected network and password on the config file of the OS when the system boots I take care of strating Google and load your custom php page. the page will: 1) check for current wifi config 2) if wifi not configured goes to step 8 3) shows a button to jump to step 8 4) wait for the configured wifi to connect and shows a loader on page aside the above button 5) when the wifi connect check the internet availability 6) if internet not available shows aside the button to add a new wifi (3) a message that says wifi connected, internet not available, when pressed jump to step 8 7) if internet available jump to step 15 8) get list of all the available wifi networks 9) ...

Development of Device Client Software that communicates with a Backend over 4G and with Hardware (Display/GPS Module) and fetches data from the cloud to display and sends data to the cloud backend over REST. Tasks: - Working on Debian/Raspbian Device Images - Integrating dependencies, applications and configuring hardware - Extending the existing Client Python Application Must: - Python - Raspbian or Debian Experience - Bash Nice: - Experience with Mender (Debian, not Yocto) - Experience with SSH for tunneling and automated device connections - Experience with IoT in General - Experience with Celular Technologies (3G / 4G) and GPS - Experience with Debian Packaging

Project Scope and Expec...API requirement specifications will need to be done (JSON inputs and outputs) for each API in excel file with sample JSON 12. Demo of working application and screen to be provided 13. Documentation of deployment steps to be provided 14. Support in installing and testing the application on development and test environment will be required 15. The application must install and work on Ubuntu and Raspbian systems 16. The application must be tested and made working with following web browsers – Firefox, Chrome, Microsoft Edge, Safari. 17. Demo and review should be provided on a screen sharing call and any review feedback comment to be incorporated before completion of each milestone and payment 18. Coding best practices must be followed 19. Code must be we...

We are currently implementing the ATWILC3000 chip in our Raspberry PI CM3 board. We have been struggling for the last few days getting the kernel module communicating properly with the hardware. [ 10.710063] wilc_sdio mmc2:0001:1: SDIO speed: 25000000 [ 10.710174] wilc_sdio mmc2:0001:1: wilc_sdio_cmd52..failed, err(-110) [ 10.710182] wilc_sdio mmc2:0001:1: Fail cmd 52, enable csa... [ 10.710192] wilc_sdio mmc2:0001:1 wlan0: ERR [wilc_wlan_initialize:905] Initializing WILC_Wlan FAILED [ 10.710200] wilc_sdio mmc2:0001:1 wlan0: ERR [wilc_mac_open:1029] Failed to initialize wilc We need support to get this up and running.

I need to create a python script that will run on a raspberry pi running Raspbian GNU/Linux 10 (buster) in a terminal window The Script needs three menu options sudo /home/pi/rpi-rgb-led-matrix/utils/led-image-viewer --led-gpio-mapping=adafruit-hat /home/pi/rpi-rgb-led-matrix/utils/ (this displays an image on a led rgb matrix) I then need to be able to send the equivalent of a CTRL-C to stop displaying the image sudo /home/pi/rpi-rgb-led-matrix/utils/led-image-viewer --led-gpio-mapping=adafruit-hat /home/pi/rpi-rgb-led-matrix/utils/ I then need to be able to send the equivalent of a CTRL-C to stop displaying the image sudo /home/pi/rpi-rgb-led-matrix/utils/led-image-viewer --led-gpio-mapping=adafruit-hat /home/pi/rpi-rgb-led-matrix/utils/ I then need to be able to send

...project is to create backend REST service in Java Spring Boot (not the UI) for various CRUD operations that will allow users to add/edit/delete/view information in a set of related tables. These APIs will be later used by the user interface for management of the information in this database. There will about 10-12 tables. 2. The data will need to be stored and retrieved from a MySQL (MariaDB on Raspbian) database. 3. The data model for the MySQL (MariaDB) database will be provided to you. 4. You need to create the database locally along with DDL & DML for MySQL database server for tables. 5. Develop a REST Service using Java Spring Boot framework. 6. Use Hibernate ORM framework for all database operations. 7. API must use JSON for data exchange 8. Code must be commented cle...

Hello, need a script that automates the build of wifi captive portal for raspberry pi. Will be using apache2 webserver for landing page Will be using raspbian buster 2020 lite/full version The requirements are: -Use hostapd, dnsmasq -Interface to be used should be an usb wifi adapter (alfa awus036nha, atheros ar9271 chipset) or any other wifi usb interface, usually defaults to wlan1 so being able to switch interfaces is desired -Must work on multiple platforms (windows, android, iphone) -Proper interface to setup landing page of webappllication is required

I'm an artist wanting to create a work that upon the identification of a sound, an image is captured and saved from the attached camera. The project must run on a Raspberry Pi, utilize the Raspberry Pi HQ camera, boot at start up, and not require any user interaction. I believe I have identified the appropriate github repo with models for sound classification , so the larg...project must run on a Raspberry Pi, utilize the Raspberry Pi HQ camera, boot at start up, and not require any user interaction. I believe I have identified the appropriate github repo with models for sound classification , so the largest amount of work will be getting the repo installed and running, then expanding the pipeline to capture images upon matching sound events. The deliverable would be a Raspbian...

This is a Validator module project. The software has to run on the following Hardware Device specification Hardware: Raspberry pi 4 Model B OS: Linux Raspbian Buster CPU: ARM 32 bit architecture User work flow: 1. Admin enters the CPU serial number through web GUI to the DB 2. Admin Loads the software to the device and sends to customer 3. Customer switches on the device, Validator software runs and check the DB entry and marks as GENUINE device. 4. If customer make another copy of the hard disk and connect it to another Hardware, It should be marked as UNAUTHORIZED device, and there should be pop-up message every 10 minutes in GUI "Please register" with "Register" button Functionality/Logic software has to auto start when the system boots 2. It should read...

We need to send Raspbian OS pre-installed for Raspberry Pi and send it customer. On 1st boot of Raspberry Pi we should assign a static IP, based on the customers network. For example if the RPi (Raspberry Pi) gets a DHCP IP then we want to assign static IP automatically on next boot of RPi. If the DHCP IP obtained on 1st boot is then we want to assign static IP

Generating a Raspi audio streaming image that is built on the latest Raspbian image then includes, Darkice with MP3 enabled, Pulse Audio with the LADSPA plugin that has plugin = dyson_compressor_1403 and plugin = fast_lookahead_limiter_1913. I will provide access to a Pi3 via AnyDesk and have clean image of the latest Raspbian image loaded on the Raspi. The Rapi will have connected to a USB port an analog to digital converter with a microphone attached for a complete hardware setup. Milestones will not be release until I have the source code with fixes and have verified the fixes are in the source code that was provided to me. This project will be awarded once I am convinced that you can do the work. You will determine the amount of funding for the milestone and the length ...

This is a job about boot optimization process for raspbian os. The freelancer should deliver a customized rasbian os for the following requirements ; * Python program should run within 4 secs from the beginning of the boot process (once the device powered-up) * The device should be able to connect to the internet via wifi, although some of the time consuming services such as dhcpcd, dnsmasq may be disabled during the boot. * Following programs and services must be included to os; Git, apt-get service, ssh service, raspicam driver. To summarize, final os should run a python program within 4 seconds once the device is powered-on and able to connect to the internet, install programs using apt-get service, take a picture, run a python3 program.

Gesucht wird ein Freelancer, der den Web Scraper „FlatHunter“ auf unserem Raspberry Pi 4 Model B 4GB installiert. Der Flathunter ist bereits fertig programmiert und unter downloadbar. Er muss nur noch auf dem Raspberry Pi installiert und konfiguriert werden. Dabei bin ich als Raspbian – Einsteiger jedoch an meine Grenzen gestoßen. Der Flathunter durchsucht Portale wie Immobilienscout24 nach neu eingestellten Inseraten und benachrichtigt mich sofort via Telegram - Bot. Den Telegram - Bot inkl. Bot-token und Receiver-ID habe ich schon erstellt. Außerdem stelle ich mir die Frage, was passiert, wenn auf Github eine neue Version von Flathunter angeboten wird, weil beispielsweise durch Änderungen der Portalbetreiber etwas angepasst werden muss, da...

We need to have the position of a wireless device (wi-Fi 2.4GHz/5.8GHz) inside a building where we spread out many Raspberry Pi 4. So, using a triangulation location could be one of the solutions taking into consideration that we have already used the Fine3 algorithm. Beacons' response too can be considered. Also, you can consider WPS (Wi-Fi Positi...as an IPS (Indoor Positioning System). As it's inside a building, there is no direct GPS signal. The solution should be cost-effective as well. In the end, we should have a POC with 3 or 4 Raspberries Pi4 locating a device with an accuracy of less than one meter. This should be done in a blueprint, show graphically the device. Any questions, please let me know. Note: Raspberry is running Raspbian. References:

I have Raspberry Compute Module 3+ running Raspbian buster. I need to configure the UART0 to be used for communication with external equipment and GPIO 35, 38, 39 for input from the push buttons. That's all.

I need image to copy on SDCard with raspbian and, on desktop, a file .py. I need only click on file to see picam image and green square that bird. thank you

Who can prepare a Raspbian system image for me with installed applications from Github: and wireshark. I will pay for image of Raspbian with installed already software from Git. Thank you